Experimental study and analysis of design parameters for analysis of fluidelastic instability for steam generator tubing
4
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this paper, the evaluation method of fluidelastic instability (FEI) of newly designed steam generator tubing in pressurized water reactor (PWR) nuclear power plants is discussed. To obtain the parameters for prediction of the critical velocity of FEI for steam generator tubes, experimental research is carried out, and the design parameters are determined. Using CFD numerical simulation, the tube array scale of the model experiment is determined, and the experimental device is designed. In this paper, 7 groups of experiments with void fractions of 0% (water), 10%, 20%, 50%, 75%, 85% and 95% were carried out. The critical damping ration, fundamental frequency and critical velocity of FEI of tubes in flowing water were measured. Through calculation, the total mass and instability constant of the immersed tube are obtained. The critical damping ration measured in the experiment mainly included two-phase damping and viscous damping, which changed with the change in void fraction from 1.56% to 4.34%. This value can be used in the steam generator design described in this paper and is conservative. By introducing the multiplier of frequency and square root of total mass per unit length, it is found that the difference between the experimental results and the calculated results is less than 1%, which proves the rationality and feasibility of the calculation method of frequency and total mass per unit length in engineering design. Through calculation, the instability constant is greater than 4 when the void fraction is less than 75%, less than 4 when the void fraction exceeds 75% and only 3.04 when the void fraction is 95%.
Abstract
In this paper, the evaluation method of fluidelastic instability (FEI) of newly designed steam generator tubing in pressurized water reactor (PWR) nuclear power plants is discussed. To obtain the parameters for prediction of the critical velocity of FEI for steam generator tubes, experimental research is carried out, and the design parameters are determined. Using CFD numerical simulation, the tube array scale of the model experiment is determined, and the experimental device is designed. In this paper, 7 groups of experiments with void fractions of 0% (water), 10%, 20%, 50%, 75%, 85% and 95% were carried out. The critical damping ration, fundamental frequency and critical velocity of FEI of tubes in flowing water were measured. Through calculation, the total mass and instability constant of the immersed tube are obtained. The critical damping ration measured in the experiment mainly included two-phase damping and viscous damping, which changed with the change in void fraction from 1.56% to 4.34%. This value can be used in the steam generator design described in this paper and is conservative. By introducing the multiplier of frequency and square root of total mass per unit length, it is found that the difference between the experimental results and the calculated results is less than 1%, which proves the rationality and feasibility of the calculation method of frequency and total mass per unit length in engineering design. Through calculation, the instability constant is greater than 4 when the void fraction is less than 75%, less than 4 when the void fraction exceeds 75% and only 3.04 when the void fraction is 95%.
참고문헌 (24)
- M. J. Pettigrew, "Experimental Studies on Flow-Induced Vibration to Support Steam Generator design" (1977), Atomic Energy of Canada Ltd.
- F. Axisa, "Vibration of Tube Bundles Subjected to Steam-Water Cross Flow: a Comparative Study of Square and Triangular Pitch arrays" (1985)
- F. HARA, "Vibrations of circular cylindrical structures subjected to two-phase cross flows", JSME international journal, 30(263), pp.711~722 (1987)
- M. J. Pettigrew, "Vibration of Tube Bundles in Two-phase Cross-Flow: Part 1dhydrodynamic Mass and damping" (1989)
- T. Nakamura, "Study on in-flow fluidelastic instability of triangular tube arrays subjected to air cross flow", J. Pressure Vessel Technol, 136(5), pp.051302~ (2014)
- T. Nakamura, "Investigation of in-flow fluidelastic instability of square tube arrays subjected to air cross flow", Proceedings of the ASME 2015 Pressure Vessels and Piping Conference (2015)
- S. Olala, "Streamwise fluidelastic instability of tube arrays in two-phase cross flows", Proceedings of ASME 2014 International Mechanical Engineering Congress and Exposition (2014)
- "2010 ASME Boiler & Pressure Vessel Code, III Division 1, Rules for Construction of Nuclear Facility Components", ~ (2010)
- H.J. Connors, "Fluidelastic vibration of tube Arrays excited by cross flow", Proc.asme Winter Annual Meet, (41), pp.93~107 (1970)
- D. S. Weaver, "The effect of damping and mass ratio on the stability of a tube bank", J.Sound & Vibration, 76(2), pp.283~294 (1981)
- S.S. Chen, "Flow-Induced Vibration of Circular Cylindrical Structures", Anl, 85-51 (1985)
- M. J. Pettigrew, "Fluidelastic instability of heat exchanger tube bundles: review and design recommendations", Trans of the ASME, J.Pressure Vessel Technol, 113, pp.242~256 (1991)
- Tiancai Tan, "Experimental study on flow-induced vibration of heat transfer tube bundls of ZH-65 steam generator", Nuclear Power Engineering, 40(S1), pp.S63~S66 (2019)
- Tiancai Tan, "Experimental study on fluidelastic instability of rotated triangular tube bundles subjected to two-phase cross flow-critical velocity", J. Vibration Eng, 32(2), pp.272~277 (2019)
- Zhuo Huo, "Experimental Investigation of Flow Induced Vibration of Multispan Straight Tube Bundle with Large Gap AVB Support", Atomic Energy Science and Technology, 54(7), pp.1214~1220 (2020)
- Hao Zhang, "Low-Frequency Modes in the Fluid-Structure Interaction of a U-tube Model for the Steam Generator in a PWR", Nuclear Engineering and Technology, 51(4), pp.1008~1016 (2019), 한국원자력학회[DOI]
- J. Hassan M, "The Effects of Tube Array Geometry on Fluidelastic Instability in Heat Exchanger Tube Arrays in Cross Flow", ASME Pressure Vessels & Piping Conference (2017)
- Jiang Lai, "Mechanism analysis on fluidelastic instability of tube bundles in considering of cross-flow effects", Nuclear Engineering and Technology, 51(1), pp.310~316 (2019), 한국원자력학회[DOI]
- M. J. Pettigrew, "Damping of heat exchanger tubes in two-phase flow", ASME J.Pressure Vessel Technol, 11(2), pp.61~68 (1997)
- R. Cheng, "Numerical simulation of fluid-elastic instability in heat exchanger tube bundles", Light Industry Machinery, 36(3), pp.36~40 (2018)
- Jian Liu, "Numerical study of fluidelastic instability fluid force model for normaltriangle tube Arrays", Applied Mathematics and Mechanics, 41(5), pp.499~508 (2020)
- Tianze Jiang, "Fluidelastic instability of tube bundles under two-phase flow subject to unsteady fluid force", Nuclear Power Engineering, 40(2), pp.58~61 (2019)
- Liyan Liu, "Numerical simulation of the fluidelastic instability of concentric arrays of tube bundles", Pressure Vessel Technology, 36(5), pp.29~34 (2019)
- SONGS SG failure note : S. C. E., San Onofre Nuclear Generating Station Unit 2Return to Service Report, , Southern California Edison, 50~361, pp.Technical Docket No. 2013