Lead-free inorganic metal perovskites beyond photovoltaics: Photon, charged particles and neutron shielding applications
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Over the last few years, lead-free inorganic metal perovskites have gained impressive ground in empowering satellites in space exploration owing to their material stability and performance evolution under extreme space environments. The present work has examined the versatility of eight such perovskites as space radiation shielding materials by computing their photon, charged particles and neutron interaction parameters. Photon interaction parameters were calculated for a wide energy range using PAGEX software. The ranges of heavy charged particles (H, He, C, N, O, Ne, Mg, Si and Fe ions) in these perovskites were estimated using SRIM software in the energy range 1 keVe10 GeV, and that of electrons was computed using ESTAR NIST software in the energy range 0.01 MeVe1 GeV. Further, the macroscopic fast neutron removal cross-sections were also calculated to estimate the neutron shielding efficiencies. The examined shielding parameters of the perovskites varied depending on the radiation type and energy. Among the selected perovskites, Cs2TiI6 and Ba2AgIO6 displayed superior photon attenuation properties. A 3.5 cm thick Ba2AgIO6-based shield could reduce the incident radiation intensity to half its initial value, a thickness even lesser than that of Pb-glass. Besides, CsSnBr3 and La0.8Ca0.2Ni0.5Ti0.5O3 displayed the highest and lowest range values, respectively, for all heavy charged particles. Ba2AgIO6 showed electron stopping power (on par with Kovar) better than that of other examined materials. Interestingly, La0.8Ca0.2Ni0.5Ti0.5O3 demonstrated neutron removal cross-section values greater than that of standard neutron shielding materials - aluminium and polyethylene. On the whole, the present study not only demonstrates the employment prospects of eco-friendly perovskites for shielding space radiations but also suggests future prospects for research in this direction
Abstract
Over the last few years, lead-free inorganic metal perovskites have gained impressive ground in empowering satellites in space exploration owing to their material stability and performance evolution under extreme space environments. The present work has examined the versatility of eight such perovskites as space radiation shielding materials by computing their photon, charged particles and neutron interaction parameters. Photon interaction parameters were calculated for a wide energy range using PAGEX software. The ranges of heavy charged particles (H, He, C, N, O, Ne, Mg, Si and Fe ions) in these perovskites were estimated using SRIM software in the energy range 1 keVe10 GeV, and that of electrons was computed using ESTAR NIST software in the energy range 0.01 MeVe1 GeV. Further, the macroscopic fast neutron removal cross-sections were also calculated to estimate the neutron shielding efficiencies. The examined shielding parameters of the perovskites varied depending on the radiation type and energy. Among the selected perovskites, Cs2TiI6 and Ba2AgIO6 displayed superior photon attenuation properties. A 3.5 cm thick Ba2AgIO6-based shield could reduce the incident radiation intensity to half its initial value, a thickness even lesser than that of Pb-glass. Besides, CsSnBr3 and La0.8Ca0.2Ni0.5Ti0.5O3 displayed the highest and lowest range values, respectively, for all heavy charged particles. Ba2AgIO6 showed electron stopping power (on par with Kovar) better than that of other examined materials. Interestingly, La0.8Ca0.2Ni0.5Ti0.5O3 demonstrated neutron removal cross-section values greater than that of standard neutron shielding materials - aluminium and polyethylene. On the whole, the present study not only demonstrates the employment prospects of eco-friendly perovskites for shielding space radiations but also suggests future prospects for research in this direction
참고문헌 (41)
- Yue Wang, "All‐Inorganic Metal Halide Perovskite Nanostructures: From Photophysics to Light‐Emitting Applications", Small Methods, 2(1), pp.1700252~ (2017), Wiley[DOI]
- Nazmul Hasan, "Structural, elastic and optoelectronic properties of inorganic cubic FrBX<sub>3<", sub> (B = Ge, Sn; X = Cl, Br, I) perovskite: the density functional theory approach, 2022, pp.12(13), 7961~7972[DOI]
- Xinmeng Zhuang, "Synergistic effects of multifunctional lanthanides doped CsPbBrCl2quantum dots for efficient and stable MAPbI3 perovskite solar cells", Advanced Functional Materials, 32(18) (2022), Wiley[DOI]
- Faruk Sani, "Advancement on Lead-Free Organic-Inorganic Halide Perovskite Solar Cells: A Review", Materials, 11(6), pp.1008~ (2018), MDPI AG[DOI]
- Yongguang Tu, "Perovskite Solar Cells for Space Applications: Progress and Challenges", Advanced Materials, 33(21), pp.2006545~ (2021), Wiley[DOI]
- M. S. Al-Buriahi, "Comparison of shielding properties of various marble concretes using GEANT4 simulation and experimental data", Journal of the Australian Ceramic Society, 56(3), pp.1127~1133 (2020), Springer Science and Business Media LLC[DOI]
- M. S. Al-Buriahi, "Effects of MgO addition on the radiation attenuation properties of 45S5 bioglass system at the energies of medical interest: an in silico study", Journal of the Australian Ceramic Society, 57(4), pp.1107~1115 (2021), Springer Science and Business Media LLC[DOI]
- Mohammed Sultan Al‐Buriahi, "Radiation attenuation properties of some commercial polymers for advanced shielding applications at low energies", Polymers for Advanced Technologies, 32(6), pp.2386~2396 (2021), Wiley[DOI]
- B. Alshahrani, "Amorphous alloys with high Fe content for radiation shielding applications", Radiation Physics and Chemistry, 183, pp.109386~ (2021), Elsevier BV[DOI]
- Abdu Saeed, "Neutron and charged particle attenuation properties of volcanic rocks", Radiation Physics and Chemistry, 184, pp.109454~ (2021), Elsevier BV[DOI]
- Yu Miyazawa, "Tolerance of Perovskite Solar Cell to High-Energy Particle Irradiations in Space Environment", iScience, 2, pp.148~155 (2018), Elsevier BV[DOI]
- Felix Lang, "Efficient minority carrier detrapping mediating the radiation hardness of triple-cation perovskite solar cells under proton irradiation", Energy & Environmental Science, 12(5), pp.1634~1647 (2019), Royal Society of Chemistry (RSC)[DOI]
- Haotong Wei, "Sensitive X-ray detectors made of methylammonium lead tribromide perovskite single crystals", Nature Photonics, 10(5), pp.333~339 (2016), Springer Science and Business Media LLC[DOI]
- Shuang Yang, "Organohalide Lead Perovskites: More Stable than Glass under Gamma‐Ray Radiation", Advanced Materials, 31(4), pp.1805547~ (2018), Wiley[DOI]
- Berna Oto, "Effective atomic numbers, electron densities and gamma rays buildup factors of inorganic metal halide cubic perovskites CsBX3 (B = Sn, Ge; X = I, Br, Cl)", Radiation Physics and Chemistry, 159, pp.195~206 (2019), Elsevier BV[DOI]
- Erdem Şakar, "A surveying of photon and particle radiation interaction characteristics of some perovskite materials", Radiation Physics and Chemistry, 189, pp.109719~ (2021), Elsevier BV[DOI]
- Srilakshmi Prabhu, "Natural polymer-based hydrogels as prospective tissue equivalent materials for radiation therapy and dosimetry", Physical and Engineering Sciences in Medicine, 44(4), pp.1107~1120 (2021), Springer Science and Business Media LLC[DOI]
- Srilakshmi Prabhu, "A simple software for swift computation of photon and charged particle interaction parameters: PAGEX", Applied Radiation and Isotopes, 176, pp.109903~ (2021), Elsevier BV[DOI]
- Yingyue Zhang, "Thermoelectric properties of all-inorganic perovskite CsSnBr3: A combined experimental and theoretical study", Chemical Physics Letters, 754, pp.137637~ (2020), Elsevier BV[DOI]
- A. Natik, "Ab-initio investigation of the structural, electronic and optical properties of lead-free halide Cs2TiI6 double perovskites", Solid State Communications, 319, pp.114006~ (2020), Elsevier BV[DOI]
- Peng Zhao, "Cs2TiI6: A potential lead-free all-inorganic perovskite material for ultrahigh-performance photovoltaic cells and alpha-particle detection", Nano Research, 15(3), pp.2697~2705 (2021), Springer Science and Business Media LLC[DOI]
- Richeng Lin, "Dual self-trapped exciton emission with ultrahigh photoluminescence quantum yield in CsCu2I3 and Cs3Cu2I5 perovskite single crystals", The Journal of Physical Chemistry C, 124(37), pp.20469~20476 (2020), American Chemical Society (ACS)[DOI]
- Fanju Zeng, "Opportunity of the lead-free all-inorganic Cs3Cu2I5 perovskite film for memristor and neuromorphic computing applications", ACS Applied Materials & Interfaces, 12(20), pp.23094~23101 (2020), American Chemical Society (ACS)[DOI]
- Longbo Yang, "Oxide perovskite Ba2AgIO6 wafers for X-ray detection", Frontiers of Optoelectronics, 14(4), pp.473~481 (2021), Springer Science and Business Media LLC[DOI]
- Impact of Ca Substitution on Structural, Optical, and the Colossal Permittivity Dielectric Properties of La1-xCaxNi0.5Ti0.5O3 (X = 0 and X = 0.2) Nanomaterials for Energy Storage Devices, "S. Gharbi", ~ (2022)
- Bing-Yu Li, "Improved ferroelectric and piezoelectric properties of (Na0.5K0.5)NbO3 ceramics via sintering in low oxygen partial pressure atmosphere and adding LiF", Journal of Advanced Dielectrics, 11(02), pp.2150012~ (2021), World Scientific Pub Co Pte Lt[DOI]
- Changzheng Hu, "Dielectric properties of unfilled tetragonal tungsten bronze Ba4PrFe0.5Nb9.5O30 ceramics", Journal of Wuhan University of Technology-Mater. Sci. Ed., 32(4), pp.904~909 (2017), Springer Science and Business Media LLC[DOI]
- Lang Wu, "Preparation and piezoelectric properties of CuO-added (Ag0.75Li0.1Na0.1K0.05)NbO3 lead-free ceramics", Journal of Wuhan University of Technology-Mater. Sci. Ed., 30(4), pp.724~728 (2015), Springer Science and Business Media LLC[DOI]
- "ESTAR, PSTAR, and ASTAR:Computer Programs for Calculating Stopping Power and Range Tables for Electrons, Protons, and Helium Ions, Version 1.2.3" (2005)[URL]
- James F. Ziegler, "SRIM – The stopping and range of ions in matter", Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 268(11-12), pp.1818~1823 (2010), Elsevier BV[DOI]
- B. Tellili, "Calculation of fast neutron removal cross sections for different lunar soils", Advances in Space Research, 53(2), pp.348~352 (2014), Elsevier BV[DOI]
- A. E. Profio, "Radiation Shielding and Dosimetry" (1979), John Wiley & Sons
- A. B. Chilton, "Principles of Radiation Shielding" (1984), Prentice-Hall
- M. F. Kaplan, "Concrete Radiation Shielding" (1989), John Wiley & Sons
- C. Chanmuang, "Microscopy and strength of borosilicate glass-to-Kovar alloy joints", Materials Science and Engineering: A, 474(1-2), pp.218~224 (2008), Elsevier BV[DOI]
- Livio Narici, "Performances of Kevlar and Polyethylene as radiation shielding on-board the International Space Station in high latitude radiation environment", Scientific Reports, 7(1) (2017), Springer Science and Business Media LLC[DOI]
- Masayuki Naito, "Investigation of shielding material properties for effective space radiation protection", Life Sciences in Space Research, 26, pp.69~76 (2020), Elsevier BV[DOI]
- Abolfazl Khodadadi, "Investigation on the radiation shielding properties of lead silicate glasses modified by ZnO and BaO", Materials Chemistry and Physics, 251, pp.123136~ (2020), Elsevier BV[DOI]
- M.S. Al-Buriahi, "Optical and radiation shielding studies on tellurite glass system containing ZnO and Na2O", Optik, 257, pp.168821~ (2022), Elsevier BV[DOI]
- M.S Al-Buriahi, "Optical properties and radiation shielding competence of Bi", Te-BGe glass system containing B2O3 and GeO2, 2022, pp.257, 168883~[DOI]
- Avula Edukondalu, "Synthesis, thermal, optical, mechanical and radiation-attenuation characteristics of borate glass system modified by Bi2O3", MgO, 2022, pp.128(4), ~[DOI]
