Three dimensional reconstruction and measurement of underwater spent fuel assemblies
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
It is an important work to measure the dimensions of underwater spent fuel assemblies in the nuclear power industry during the overhaul, to judging whether the spent fuel assemblies can continue to be used. In this paper, a three dimensional reconstruction method for underwater spent fuel assemblies of nuclear reactor based on linear structured light is proposed, and the topography and size measurement was carried out based on the reconstructed 3D model. Multiple linear structured light sensors are used to obtain contour size data, and the shape data of the whole spent fuel assembly can be collected by onedimensional scanning motion. In this paper, we also presented a corrected model to correct the measurement error introduced by lead-glass and water is corrected. Then, we set up an underwater measurement system for spent fuel assembly based on this method. Finally, an underwater measurement experiment is carried out to verify the 3D reconstruction ability and measurement ability of the system, and the measurement error is less than ±0.05 mm.
Abstract
It is an important work to measure the dimensions of underwater spent fuel assemblies in the nuclear power industry during the overhaul, to judging whether the spent fuel assemblies can continue to be used. In this paper, a three dimensional reconstruction method for underwater spent fuel assemblies of nuclear reactor based on linear structured light is proposed, and the topography and size measurement was carried out based on the reconstructed 3D model. Multiple linear structured light sensors are used to obtain contour size data, and the shape data of the whole spent fuel assembly can be collected by onedimensional scanning motion. In this paper, we also presented a corrected model to correct the measurement error introduced by lead-glass and water is corrected. Then, we set up an underwater measurement system for spent fuel assembly based on this method. Finally, an underwater measurement experiment is carried out to verify the 3D reconstruction ability and measurement ability of the system, and the measurement error is less than ±0.05 mm.
참고문헌 (24)
- "4-FACE FUEL INSPECTION"[URL]
- A. Sanchez Siguero, "Capacity of the equipment family SICOM to inspect fuel elements", 39 Annual Meeting of Spanish Nuclear Society, 39. Reunion Anual Sociedad Nuclear Espanola, pp.25~27 (2013)
- S. Sasaki, K, "Measurement of deformation of FBR fuel assembly wrapper tube by an innovative technique", 2008 KAERI, 2008, ~
- P. S. Zavyalov, "A structured-light method for the measurement of deformations in fuel assemblies in the cooling ponds of nuclear power plants", Russ. J. Nondestr. Test, 48, pp.705~711 (2012)
- 조재완, "MEASUREMENT OF NUCLEAR FUEL ROD DEFORMATION USING AN IMAGE PROCESSING TECHNIQUE", Nuclear Engineering and Technology, 43(2), pp.133~140 (2011), 한국원자력학회
- C. Wang, "Deformation detection system of fuel assembly based on underwater binocular vision", J. Appl. Opt, 40, pp.58~63 (2019)
- J. Zhao, "Three-dimensional reconstruction and measurement of fuel assemblies for sodium-cooled fast reactor using linear structured light", Ann. Nucl. Energy, 160, pp.108397~ (2021)
- users' Guide for the Nuclear Power Industry, "Radiation Effects on Electronic Equipment, a Designers'", pp.1994, R.E. Sharp
- J. R. Srour, "Displacement damage effects in irradiated semiconductor devices", IEEE Trans. Nucl. Sci, 60, pp.1740~1766 (2013)
- J. R. Srour, "A framework for understanding displacement damage mechanisms in irradiated silicon devices", IEEE Trans. Nucl. Sci, 53, pp.3610~3620 (2006)
- J. Bogaerts, "Enhanced dark current generation in proton-irradiated CMOS active pixel sensors", IEEE Trans. Nucl. Sci, 49, pp.1513~1521 (2002)
- V. Goiffon, "Radiation effects in pinned photodiode CMOS image sensors : pixel performance degradation due to total ionizing dose", IEEE Trans. Nucl. Sci, 59, pp.2878~2887 (2012)
- B. Speit, "Radiation resistant optical glasses", Nucl. Instrum. Methods Phys. Res. B, 65, pp.384~386 (1992)
- W. Li, "The effect of added O2 on the transmittance and radiation resistance of radiation resistant glasses", Opt Express, 18, pp.26307~26312 (2010)
- A. Palomer, "Underwater laser scanner : ray-based model and calibration", IEEE ASME Trans. Mechatron, 24, pp.1986~1997 (2019)
- A. Agrawal, "A theory of multi-layer flat refractive geometry", 2012 IEEE Conference on Computer Vision and Pattern Recognition (2012), IEEE
- T. Treibitz, "Flat refractive geometry", IEEE Trans. Pattern. Anal, 34, pp.51~65 (2012)
- C. C. Wang, "Seafloor roughness measured by a laser line scanner and a conductivity probe", IEEE J. Ocean. Eng, 34, pp.459~465 (2009)
- H. R. Cui, "3D Reconstruction for Underwater Target Based on Linear Structured Light", Applied Mechanics and Materials, pp.660~664 (2014)
- S.G. Narasimhan, "Structured light methods for underwater imaging:light stripe scanning and photometric stereo", Proceedings of OCEANS 2005 (2005), MTS[DOI]
- P. Risholm, "Adaptive structured light with scatter correction for high-precision underwater 3D measurements", Sensors, 19, pp.19051043~ (2019)
- S. Tetlow, "Three-dimensional measurement of underwater work sites using structured laser light", Meas. Sci. Technol, 10, pp.1162~1167 (1999)
- S. Chi, "A laser line auto-scanning system for underwater 3D reconstruction", Sensors, 16, pp.16091534~ (2016)
- A. Palomer, "3D laser scanner for underwater manipulation", Sensors, 18, pp.18041086~ (2018)