Numerical simulation of a toroidal single-phase natural circulation loop with a k-kL-ω transitional turbulence model
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The wall friction correlations of oscillatory natural circulation loops are highly loop-specific, making it difficult to perform 1-D system simulations before obtaining specific experimental data. To better predict the friction characteristics, the nonlinear dynamics of a toroidal single-phase natural circulation loop were numerically investigated, and the transition effect was considered. The k-kL-ω transitional turbulence and k-ω SST turbulence models were used to compute the flow characteristics of the loop under different heating powers varying from 0.48 to 1.0 W/cm2, and the results of both models were compared with previous experiments. The mass flow rates and friction factors predicted by the k-kL-ω model showed a better agreement with the experimental data than the results of the k-ω SST model. The oscillation frequencies calculated using both models agreed well with the experimental data. The k-kL-ω transitional turbulence model provided better friction-factor predictions in oscillatory natural circulation loops because it can reproduce the temporal and spatial variation of the wall shear stress more accurately by capturing the movement of laminar, transition turbulent zones inside unstable natural circulation loops. This study shows that transition effects are a possible explanation for the highly loop-specific friction correlations observed in various oscillatory natural circulation loops.
Abstract
The wall friction correlations of oscillatory natural circulation loops are highly loop-specific, making it difficult to perform 1-D system simulations before obtaining specific experimental data. To better predict the friction characteristics, the nonlinear dynamics of a toroidal single-phase natural circulation loop were numerically investigated, and the transition effect was considered. The k-kL-ω transitional turbulence and k-ω SST turbulence models were used to compute the flow characteristics of the loop under different heating powers varying from 0.48 to 1.0 W/cm2, and the results of both models were compared with previous experiments. The mass flow rates and friction factors predicted by the k-kL-ω model showed a better agreement with the experimental data than the results of the k-ω SST model. The oscillation frequencies calculated using both models agreed well with the experimental data. The k-kL-ω transitional turbulence model provided better friction-factor predictions in oscillatory natural circulation loops because it can reproduce the temporal and spatial variation of the wall shear stress more accurately by capturing the movement of laminar, transition turbulent zones inside unstable natural circulation loops. This study shows that transition effects are a possible explanation for the highly loop-specific friction correlations observed in various oscillatory natural circulation loops.
참고문헌 (14)
- P. Welander, "On the oscillatory instability of a differentially heated fluid loop", J. Fluid Mech, 29, pp.17~30 (1967)
- H. F. Creveling, "Stability characteristics of a single-phase free convection loop", J. Fluid Mech, 67, pp.65~84 (1975)
- P. K. Vijayan, "Experimental observations on the general trends of the steady state and stability behavior of single-phase natural circulation loops", Nucl. Eng. Des, 215, pp.139~152 (2002)
- J. Y. Wang, "CFD investigating flow and heat transfer characteristics in a natural circulation loop", Ann. Nucl. Energy, 58, pp.65~71 (2013)
- J. Y. Kudariyawar, "Computational study of instabilities in a rectangular natural circulation loop using 3D CFD simulation", Int. J. Therm. Sci, 101, pp.193~206 (2016)
- W. Ambrosini, "The effect of wall friction in single-phase natural circulation stability at the transition between laminar and turbulent flow", Ann. Nucl. Energy, 31, pp.1833~1865 (2004)
- K. Naveen, "Investigations on single-phase natural circulation loop dynamics. Part 2 : role of wall constitutive laws", Prog. Nucl. Energy, 75, pp.105~116 (2014)
- D. S. Pilkhwal, "Analysis of the unstable behavior of a single-phase natural circulation loop with one-dimensional and computational fluid-dynamic models", Ann. Nucl. Energy, 34, pp.339~355 (2007)
- L. Peng, "Study on anti-disturbance capacity of LBE cooled double loop natural circulation system under asymmetric conditions", Ann. Nucl. Energy, 182, pp.109584~ (2023)
- Q. Luo, "Multi-region oscillation characteristics and hazard of supercritical carbon dioxide in parallel channels natural circulation system", Energy, 267, pp.126587~ (2023)
- D. K. Walters, "A three-equation eddy-viscosity model for Reynoldsaveraged Navier-Stokes simulations of transitional flow", J. Fluid. Eng-T. ASME, 130, pp.320~327 (2008)
- F. R. Menter, "Two-equation eddy-viscosity turbulence models for engineering applications", AIAA J, 32, pp.1598~1605 (1994)
- "ANSYS Fluent User’s Guide, Version 13.0", ANSYS, Inc, ~
- B. A. Kader, "Temperature and concentration profiles in fully turbulent boundary layers", Int. J. Heat Mass Tran, 24, pp.1541~1544 (1981)