Stress evaluation method of reinforced wall-thinned Class 2/3 nuclear pipes for structural integrity assessment

키워드

참고문헌 (24)

1. J.H. Lee, "Application of laser-generated guided wave for evaluation of corrosion in carbon steel pipe", NDT&E Int, 42(3), pp.222~227 (2009)[DOI]
2. H. Ahmed, "Evaluation of the proximity effect on flow-accelerated corrosion", Ann. Nucl. Energy, 37(4), pp.598~605 (2010)[DOI]
3. R. Francis, "Galvanic corrosion of high alloy stainless steel in sea water", Br. Corrosion J, 29(1), pp.53~57 (1994)
4. S. H. Ahn, "Comparison of experimental and finite element analytical results for the strength and the deformation of pipes with local wall thinning subjected to bending moment", Nucl. Eng. Des, 236(2), pp.145~155 (2006)[DOI]
5. J. Peng, "Safety assessment of pipes with multiple local wall thinning defects under pressure and bending moment", Nucl. Eng. Des, 241(8), pp.2758~2765 (2011)[DOI]
6. M. Elchalakani, "CFRP strengthening and rehabilitation of corroded steel pipelines under direct indentation", Thin-Walled Struct, 119, pp.510~521 (2017)[DOI]
7. H. Zarrinzadeh, "Crack growth and debonding analysis of an aluminum pipe repaired by composite patch under fatigue loading", Thin-Walled Struct, 112, pp.140~148 (2017)[DOI]
8. P. H. Chan, "CFRP reinforcement and repair of steel pipe elbows subjected to sever cyclic loading", J. Pressure Vessel Technol, 139(5), pp.051403~ (2017)[DOI]
9. E. Mahdi, "Development of cost-effective composite repair system for oil", gas pipelines, 2018, pp.202(15), 802~806
10. "ASME Section XI, Code Case N-786-3, Alternative Requirements for Sleeve Reinforcement of Class 2 and 3 Moderate-Energy Carbon Steel Piping for Raw Water Service", Am. Soc. of Mech. Eng (2017)
11. "ASME Section XI Code Case N-789-3, Alternative Requirements for Pad Reinforcement of Class 2 and 3 Moderate-Energy Carbon Steel Piping", Am. Soc. of Mech. Eng (2017)
12. N. R. F. RohemL, "Development and qualification of a new polymeric matrix laminated composite for pipe repair", Compos. Struct, 152(15), pp.737~745 (2016)[DOI]
13. E. Mahdi, "Development of cost-effective composite repair system for oil", gas pipelines, 2018, pp.202(15), 802~806
14. K. S. Lim, "Behaviour of steel pipelines with composite repairs analysed using experimental and numerical approaches", Thin-Walled Struct, 139, pp.321~333 (2019)[DOI]
15. M. F. Muda, "Burst pressure strength of corroded subsea pipelines repaired with composite fiber-reinforced polymer patches", Eng. Fail. Anal, 136, pp.106204~ (2022)[DOI]
16. P.G. Fazzini, "Influence of old rectangular repair patches on the burst pressure of a gas pipeline", Int. J. Pres. Ves. Pip, 83(1), pp.27~34 (2006)[DOI]
17. M. Shamsuddoha, "Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs", Compos. Struct, 100, pp.40~54 (2013)[DOI]
18. J. L. Otegui, "Influence of multiple sleeve repairs on the structural integrity of gas pipelines", Int. J. Pres. Ves. Pip, 79(11), pp.759~765 (2002)[DOI]
19. "ASME Boiler and Pressure Vessel Code, Section III, Rules for Construction of Nuclear Power Plant Components" (2015), American Society of Mechanical Engineers
20. J. S. Kim, "Efficient elastic stress analysis method for piping system with wall-thinning and reinforcement", Nucl. Eng. Des, 54(2), pp.732~740 (2022)[DOI]
21. J. H. Jang, "Analytical equivalent stiffness analysis for various reinforcements of wall-thinned pipe", Trans. of the KPVP, 18(1), pp.11~18 (2022)[DOI]
22. ABAQUS Version, "ABAQUS Version, User’s Manual", Dassault Systems, Inc, 2018~ (2018)
23. "ASME Boiler and Pressure Vessel Code, Section VIII, Division 2, Rules for Construction of Pressure Vessels", American Society of Mechanical Engineers, Alternative Rules, ~ (2015)
24. P. Dong, "A structural stress definition and numerical implementation for fatigue analysis of welded joints", Int. J. Fatig, 23(10), pp.865~876 (2001)[DOI]

관련 논문AI추천