Application of the Polarised Potential-pH Diagrams to Investigate the Role of Sulfate and Dissolved Oxygen in the 3550-ppm NaCl Solution on the Corrosion Behaviour of AISI 316L Stainless Steel
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The cyclic polarisation technique was applied to determine the corrosion, primary-passivation, transpassive, and protection potential of AISI 316L stainless steels immersed in 3550-ppm NaCl solution containing sulfate in the content up to 3000 ppm. The solutions were kept constant at 27°C and saturated by laboratory air. The solution pH was varied from 3 to 11. Each type of potentials was plotted in function of pH and linked as lines to determine the different zones in the constructed potential-pH diagram. The predominant regimes of the immunity, general corrosion, perfect passivation, imperfect passivation, and pitting corrosion were determined based on those lines of potentials. Comparing to the potential-pH diagram of specimens immersed in the aerated and deaerated 3550-ppm NaCl solutions, the addition of 3000-ppm Na2SO4 to these solutions increased the overall, perfect and imperfect, passivation regime by shifting the transpassive-potential line to the noble direction. However, it also widened the imperfect passivation area. The addition of Na2SO4 did not significantly affect the corrosion potential. It was found that the dissolved oxygen tends to negatively shift the transpassive-potential and protection-potential lines at all studied pH. The considerable effect of dissolved oxygen on corrosion and primary-passivation potentials could not be observed.
Abstract
The cyclic polarisation technique was applied to determine the corrosion, primary-passivation, transpassive, and protection potential of AISI 316L stainless steels immersed in 3550-ppm NaCl solution containing sulfate in the content up to 3000 ppm. The solutions were kept constant at 27°C and saturated by laboratory air. The solution pH was varied from 3 to 11. Each type of potentials was plotted in function of pH and linked as lines to determine the different zones in the constructed potential-pH diagram. The predominant regimes of the immunity, general corrosion, perfect passivation, imperfect passivation, and pitting corrosion were determined based on those lines of potentials. Comparing to the potential-pH diagram of specimens immersed in the aerated and deaerated 3550-ppm NaCl solutions, the addition of 3000-ppm Na2SO4 to these solutions increased the overall, perfect and imperfect, passivation regime by shifting the transpassive-potential line to the noble direction. However, it also widened the imperfect passivation area. The addition of Na2SO4 did not significantly affect the corrosion potential. It was found that the dissolved oxygen tends to negatively shift the transpassive-potential and protection-potential lines at all studied pH. The considerable effect of dissolved oxygen on corrosion and primary-passivation potentials could not be observed.
참고문헌 (7)
- M. Pourbaix, "Atlas d'équilibres électrochimiques" (1963), Gauthier- Villars
- D. Landolt, "Corrosion et Chimie de Surfaces des Métaux" (1997), Presses Polytechniques et Universités Romandes
- E. D. Verink, Jr, "“Application of Electrochemical Techniques in the Development of Alloys for Corrosive Survice”" (1977), Electrochemical Techniques for Corrosion
- M. Hubble, , The International Corrosion Forum (1983)
- Prateep Vongbandit, "Department of Metallurgical Engineering" (2001), Faculty of Engineering, Chulalongkorn University
- P. Vongbandit, "“Investigtion of Pourbaix Diagrams of AISI 316L Stainless Steel in Air-saturated Aqueous Solutions Containing Chloride by Cyclic Polarisation Technique”", the 15th International Corrosion Congress (2002)
- M. Tunthulawed, "Water Supply Engineering" (1995), Chulalongkorn University Press