Electrochemical Random Signal Analysis during Localized Corrosion ofAnodized 1100 Aluminum Alloy in Chloride Environments
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
A new type of electrochemical random signal (electrochemical noise) analysis technique was applied to localized corrosion of anodic oxide film formed 1100 aluminum alloy in 0.5 kmol/m³ H₃BO₄/0.05 kmol/m³ Na2B4O7 with 0.01 kmol/m3 NaCl. The effect of anodic oxide film structure, barrier type, porous type, and composite type on galvanic corrosion resistance was also examined. Before localized corrosion started, incubation period for pitting corrosion, both current and potential slightly change as initial value with time. The incubation period of porous type anodic oxide specimens are longer than that of barrier type anodic oxide specimens. While pitting corrosion, the current and potential were changed with fluctuations and the potential and the current fluctuations show a good correlation. The records of the current and potential were processed by calculating the power spectrum density (PSD) by the Fast Fourier Transform (FFT) method. The potential and current PSD decrease with increasing frequency, and the slopes are steeper than or equal to minus one (-1). This technique allows observation of electrochemical impedance changes during localized corrosion.
Abstract
A new type of electrochemical random signal (electrochemical noise) analysis technique was applied to localized corrosion of anodic oxide film formed 1100 aluminum alloy in 0.5 kmol/m³ H₃BO₄/0.05 kmol/m³ Na2B4O7 with 0.01 kmol/m3 NaCl. The effect of anodic oxide film structure, barrier type, porous type, and composite type on galvanic corrosion resistance was also examined. Before localized corrosion started, incubation period for pitting corrosion, both current and potential slightly change as initial value with time. The incubation period of porous type anodic oxide specimens are longer than that of barrier type anodic oxide specimens. While pitting corrosion, the current and potential were changed with fluctuations and the potential and the current fluctuations show a good correlation. The records of the current and potential were processed by calculating the power spectrum density (PSD) by the Fast Fourier Transform (FFT) method. The potential and current PSD decrease with increasing frequency, and the slopes are steeper than or equal to minus one (-1). This technique allows observation of electrochemical impedance changes during localized corrosion.
참고문헌 (24)
- K. Watanabe, , J. Electroanal. Chem, 473, pp.250~ (1999)
- Y. Li, , J. Electrochm. Soc, 144, pp.866~ (1977)
- M. Sakairi, , ASST 2000, pp.410~ (2000)
- M. Sakairi, , Electrochem. Soc. Proc, 99, pp.171~ (1999)
- Y. Baba, "Oxide film by electrolysis, Maki-Syoten" (1996)
- Y. Takashima, , J. Surf. Fin. Soc. Jpn, 51, pp.625~ (2000)
- M. Sakairi, , Electrochemistry, 71, pp.920~ (2003)
- S. Z. Chu, , J. Electrochme. Soc, 147, pp.2181~ (2000)
- T. Kikuchi, , Surface and coatings technology, 169, pp.199~ (2003)
- T. Kikuchi, , J. Electrochem. Soc (2003)
- T. Kikuchi, , J. Electrochem. Soc (2001)
- T. Yanagishita, , Langmuir, 20, pp.554~ (2004)
- F. Matsumoto, , Jpn. J. App. Phys. 2-Letters & Express Letter (2004)
- H. Masuda, , Electrochemistry, 72, pp.389~ (2004)
- U. Bertocci, , J. Electrochem. Soc, 144, pp.31~ (1997)
- U. Bertocci, , J. Electrochem. Soc, 144, pp.37~ (1997)
- T. Tsuru, , Zairyo-to-Kankyo, 52, pp.488~ (2003)
- H. Yashiro, , Zairyo-to- Kankyo, 52, pp.466~ (2003)
- Y. Ioti, , Zairyo-to-Kankyo, 52, pp.471~ (2003)
- H. Inoue, , Zairyo-to- Kankyo, 52, pp.483~ (2003)
- Y. Yoneda, , Zairyo-to-Kankyo, 52, pp.495~ (2003)
- M. Sakairi, , Electrochemistry, 74, pp.458~ (2006)
- M. Sakairi, "submitted to J. JSEM", ~
- S. -M. Moon, , J. Electrochem. Soc (2003)