Numerical Simulation of Flow and Dross Particle Transfer in a 55% Al-Zn Pot
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Computational fluid dynamics (CFD) is nowadays a powerful and reliable tool for simulating different flow processes and temperature. CFD is used to analyze the various pot geometries and operative variables in 55% Al-Zn pot of CGL. In this research, different strip velocities were assumed and then shown the flow pattern in the pot that was similar in the different strip velocities. Temperature distribution in the pot depended on inductors and inlet strip temperature at the steady condition. Generation of dross particles and transport models were considered to describe dross particles evolution inside the pot. In order to observe dross influence by scrap location, dross particles were generated upon the sink roll. Floating time of dross particles is different by scraper locations above the sink roll.
Abstract
Computational fluid dynamics (CFD) is nowadays a powerful and reliable tool for simulating different flow processes and temperature. CFD is used to analyze the various pot geometries and operative variables in 55% Al-Zn pot of CGL. In this research, different strip velocities were assumed and then shown the flow pattern in the pot that was similar in the different strip velocities. Temperature distribution in the pot depended on inductors and inlet strip temperature at the steady condition. Generation of dross particles and transport models were considered to describe dross particles evolution inside the pot. In order to observe dross influence by scrap location, dross particles were generated upon the sink roll. Floating time of dross particles is different by scraper locations above the sink roll.
참고문헌 (18)
- A. Nasser, , J. Mater. Proc. Tech, 210, pp.429~ (2010)
- I. Mejia, , Mater. Sci. Eng. A, 528, pp.4468~ (2011)
- C. Nikhare, , Mater. Sci. Eng. A, 528, pp.3010~ (2011)
- T. Uemori, , Key Eng. Mater, 177, pp.497~ (2000)
- D. W. Leu, , J. Mater. Proc. Tech, 66, pp.9~ (1997)
- R. M. Cleveland, , Inter. J. Plasticity, 18, pp.769~ (2002)
- J. B. Kim, , Corros. Sci. Tech, 26, pp.191~ (1997)
- 김종범, "용융아연도금 및 55%Al-Zn 합금도금강판의내식성에 미치는 크로메이트처리의 영향", CORROSION SCIENCE AND TECHNOLOGY, 30(5), pp.247~256 (2001), 한국부식방식학회
- D. Phelan, , Galvatech, 6, pp.961~ (2004)
- C. H. Ellen, , J. Fluids Eng, 106, pp.399~ (1984)
- Y. H. Kim, , ISIJ, 44, pp.369~ (2005)
- Y. H. Kim, , ISIJ, 40, pp.706~ (2000)
- S. J. Lee, , ISIJ, 42, pp.407~ (2002)
- F. Bezzo, , Com. Chem. Eng, 28, pp.501~ (2004)
- M. A. Hoef, , Chem. Eng. Sci, 59, pp.5157~ (2004)
- Y. Takeishi, , ISIJ, 40, pp.1127~ (2000)
- 노경철, "점탄성 유체의 난류 해석을 위한 수정된 k-ε 난류모델 개발 및 혈류역학에의 적용", 한국전산유체공학회지, 15(4), pp.1~8 (2010), 한국전산유체공학회
- N. G. Wright, , Appl. Math. Model, 27, pp.1013~ (2003)