본문 바로가기
KERD
논문KCI 등재

36개월간 국내 옥외폭로시험에 따른 갈바륨 강판의 대기부식거동 및 표면외관 변화

Atmospheric Corrosion and Surface Appearance of Galvalume Steel following Outdoor Exposure for 36 Months: A Korean Study

유영란|김영식|김기태
한국재료부식학회 (The Corrosion Science Society of Korea)|2020.12|CORROSION SCIENCE AND TECHNOLOGY|제19권 제6호|pp. 326-336|DOI https://doi.org/10.14773/cst.2020.19.6.326

1

조회

0

다운로드

0

인용

0

참고문헌

키워드

Outdoor exposure testAtmospheric corrosionGalvanized steelGalvalume steel
주제분류금속공학

초록

Galvalume steel (GL) is widely used in marine and industrial environments. It is characterized by better corrosion resistance than carbon steel. However, corrosion and economic losses may occur as the usage time is increased. Therefore, in this study, an outdoor exposure test of GL for 36 months was conducted across six regions of Korea. Parameters such as corrosion rate, chrominance (color, chroma, and brightness), glossiness, and surface appearance were analyzed. The results showed no significant change in appearance, and the initial corrosion rate was large, but a tendency to decrease with time was observed. Increased outdoor exposure time led to increase in the level of corrosion products. In the case of coastal areas where S, Cl, and other elements were detected, a relatively high decrease in Zn content was observed. Al forms a protective oxide film and exists in the coating layer, but Zn dissolves due to its chemical activity and low potential.

Abstract

Galvalume steel (GL) is widely used in marine and industrial environments. It is characterized by better corrosion resistance than carbon steel. However, corrosion and economic losses may occur as the usage time is increased. Therefore, in this study, an outdoor exposure test of GL for 36 months was conducted across six regions of Korea. Parameters such as corrosion rate, chrominance (color, chroma, and brightness), glossiness, and surface appearance were analyzed. The results showed no significant change in appearance, and the initial corrosion rate was large, but a tendency to decrease with time was observed. Increased outdoor exposure time led to increase in the level of corrosion products. In the case of coastal areas where S, Cl, and other elements were detected, a relatively high decrease in Zn content was observed. Al forms a protective oxide film and exists in the coating layer, but Zn dissolves due to its chemical activity and low potential.

참고문헌 (26)

  1. P. R. Roberge, "Corrosion Engineering Princples and practice", pp.379~381 (2008), McGraw-Hill
  2. J. R. Davis, "Corrosion Understanding the basics", pp.387~391 (2000), ASM International
  3. Z. Ahmad, "Principles of Corrosion Engineering and Corrosion Control", pp.407~411 (2006), Elsevier
  4. A.R. Marder, "The metallurgy of zinc-coated steel", Progress in Materials Science, 45(3), pp.191~271 (2000), Elsevier BV[DOI]
  5. F. Rosalbino, "Influence of rare earths addition on the corrosion behaviour of Zn–5%Al (Galfan) alloy in neutral aerated sodium sulphate solution", Electrochimica Acta, 52(24), pp.7107~7114 (2007), Elsevier BV[DOI]
  6. Ping Qiu, "Evolution of corrosion products and metal release from Galvalume coatings on steel during short and long-term atmospheric exposures", Materials Chemistry and Physics, 133(1), pp.419~428 (2012), Elsevier BV[DOI]
  7. Chuang Qiao, "Corrosion kinetics and patina evolution of galvanized steel in a simulated coastal-industrial atmosphere", Journal of Materials Science & Technology, 35(10), pp.2345~2356 (2019), Elsevier BV[DOI]
  8. Y. Liu, "Electrochemical monitoring of the degradation of galvanized steel in simulated marine atmosphere", Corrosion Science, 147, pp.273~282 (2019), Elsevier BV[DOI]
  9. M. Fedel, "Comparison between natural and artificial weathering of e-coated galvanized steel panels", Progress in Organic Coatings, 76(1), pp.194~203 (2013), Elsevier BV[DOI]
  10. R. Romero, "Study of different inorganic oxide thin films as barrier coatings against the corrosion of galvanized steel", Surface and Coatings Technology, 204(12-13), pp.2060~2063 (2010), Elsevier BV[DOI]
  11. Evandro de Azevedo Alvarenga, "Atmospheric corrosion evaluation of electrogalvanized, hot-dip galvanized and galvannealed interstitial free steels using accelerated field and cyclic tests", Surface and Coatings Technology, 306, pp.428~438 (2016), Elsevier BV[DOI]
  12. R. Romero Pareja, "Corrosion behaviour of zirconia barrier coatings on galvanized steel", Surface and Coatings Technology, 200(22-23), pp.6606~6610 (2006), Elsevier BV[DOI]
  13. D. Persson, "Corrosion and corrosion products of hot dipped galvanized steel during long term atmospheric exposure at different sites world-wide", Corrosion Science, 126, pp.152~165 (2017), Elsevier BV[DOI]
  14. E. Almeida, "Atmospheric corrosion of zinc Part 1: Rural and urban atmospheres", British Corrosion Journal, 35(4), pp.284~288 (2013), Informa UK Limited[DOI]
  15. E. Almeida, "Atmospheric corrosion of zinc Part 2: Marine atmospheres", British Corrosion Journal, 35(4), pp.289~296 (2013), Informa UK Limited[DOI]
  16. 김기태, "36개월간 국내 옥외폭로시험에 따른 아연도강의 부식거동", CORROSION SCIENCE AND TECHNOLOGY, 17(5), pp.231~241 (2018), 한국부식방식학회[DOI]
  17. "KS D ISO 9226, Corrosion of metals and alloys –Corrosivity of atmospheres - Determination of corrosion rate of stand- ard specimens for the evaluation of corrosivity", ~ (2008)
  18. "ISO 11664-4, Colorimetry - Part 4: CIE 1976 L*a*b*Colour space", ISO, ~ (2008)
  19. Sara Sharifzadeh, "Supervised feature selection for linear and non-linear regression of L⁎a⁎b⁎ color from multispectral images of meat", Engineering Applications of Artificial Intelligence, 27, pp.211~227 (2014), Elsevier BV[DOI]
  20. "ISO 11664-6, Colorimetry - Part 6: CIEDE2000Colour-difference formula", ISO, ~ (2013)
  21. "KS L 2405, Method of Measurement for Specular Glossiness", KS, ~ (2011)
  22. "ASTM D 523, Standard Test Method for Specular Gloss", ASTM, ~ (1995)
  23. A. Ramus Moreira, "Zn", 55Al coating microstructure and corrosion mechanism, 2006, pp.48(3), 564~576[DOI]
  24. Haoping Peng, "Synergistic effect of Cu and Si on hot-dipping galvalume coating", Surface and Coatings Technology, 206(21), pp.4329~4334 (2012), Elsevier BV[DOI]
  25. D. Persson, "Corrosion product formation on Zn55Al coated steel upon exposure in a marine atmosphere", Corrosion Science, 53(2), pp.720~726 (2011), Elsevier BV[DOI]
  26. A. Pritzel dos Santos, "Comparative study of the corrosion behavior of galvanized, galvannealed and Zn55Al coated interstitial free steels", Surface and Coatings Technology, 279, pp.150~160 (2015), Elsevier BV[DOI]

관련 논문AI추천

36개월간 국내 옥외폭로시험에 따른 아연도강의 표면외관 변화김기태, 김영식한국재료부식학회 · CORROSION SCIENCE AND TECHNOLOGY2018 · 제17권 제6호36개월간 국내 옥외폭로시험에 따른 아연도강의 부식거동김기태, 김영식한국재료부식학회 · CORROSION SCIENCE AND TECHNOLOGY2018 · 제17권 제5호Accelerated Prediction Methodologies to Predict the Outdoor Exposure Lifespan of Galvannealed Steel김기태, 김영식, 유영란한국재료부식학회 · CORROSION SCIENCE AND TECHNOLOGY2019 · 제18권 제3호Atmospheric Corrosion Behavior of Weathering Steel Exposed to the Outdoors for 10 Years in Korea김영식, 유영란, 최승헌한국재료부식학회 · CORROSION SCIENCE AND TECHNOLOGY2022 · 제21권 제4호Atmospheric Corrosion Behavior of Carbon Steel by the Outdoor Exposure Test for 10 Years in Korea최승헌, Y.R. Yoo, Y. S. Kim한국재료부식학회 · CORROSION SCIENCE AND TECHNOLOGY2022 · 제21권 제3호Accelerated and Outdoor Exposure Tests of Aluminum Coated Steel SheetsChoonho Jung, Jaemin Lee, Jongmin Kim, Sangkyu Lim한국재료부식학회 · CORROSION SCIENCE AND TECHNOLOGY2011 · 제10권 제6호

이 간행물의 다른 논문 (6건)

Control of Galvanic Corrosion Between A516Gr.55 Steel and AA7075T6 Depending on NaCl Concentration and Solution Temperature김기태, 김영식, 전종모, 허승영pp. 281-287선박용 AA5083-H321의 유속에 의한 침식손상 방지를 위한 최적 음극방식전위 규명김성종, 박일초, 정상옥pp. 288-295지역난방 냉각수 배관의 용접부 파손 분석김정구, 김희산, 김우철, 김경민, 이수열, 정준철, 손홍균pp. 296-301다중선형회귀법을 활용한 예민화와 환경변수에 따른 AL-6XN강의 공식특성 예측정광후, 김성종pp. 302-309경질양극산화된 5083-H321 알루미늄 합금의 해수 내 액적충격침식부식 손상 연구김성종, 신동호pp. 310-317
원문 보기