본문 바로가기
KERD
논문KCI 등재

The Effect of Solution Treatment on Intergranular Corrosion Resistance of a New Type Ultra Low Carbon Stainless Steel

Wang Julin|Ni Nannan|Yan Qingling|Liu Lingli
한국재료부식학회 (The Corrosion Science Society of Korea)|2007.06|CORROSION SCIENCE AND TECHNOLOGY|제6권 제3호|pp. 140-146

1

조회

0

다운로드

1

인용

0

참고문헌

주제분류금속공학

초록

Abstract

In the paper, with corrosion velocity measurement and metallographic observation on specimens after sulfuric acid/ferric sulfate boiling experiment, intergranular corrosion tendency of the new type ultra low carbon stainless steel developed by ourselves which experienced solution treatment at different temperatures was evaluated. A VHX 500 super depth field tridimensional microscope was used to observe corrosion patterns on the sample surfaces. The depth and width of grain boundary corrosion groove were measured by the tridimensional microscope, which indicated that the corrosion degrees of the samples which received solution treatment at different temperatures are quite different. Transgranular corrosion at different degree occurred along with forged glide lines. After comparison it was proved that the stainless steel treated at 1100℃ performs very well against intergranular corrosion.

참고문헌 (25)

  1. "Corrosion and influence facts of stainless steels", 10, pp.78~81 (2005)
  2. "Solution process for heat exchanging pipe of Austenitic Stainless Steel", 11, pp.205~208 (1998)
  3. "Using electrochemical reactivation method survey stainless steel grain-boundary corrosion seneitivity", 39, pp.112~114 (1996)
  4. "The electrochemical reactivation test (ERT) to detect the susceptibility to intergranular corrosion", 45, pp.2325~2336 (2003)
  5. "Influence of σ-phase on mechanical properties and corrosion resistance of duplex stainless steels", 41, pp.1615~1631 (1999)
  6. "Application of double loop electrochemical potentiodynamic reactivation test to austenitic and duplex stainless steels", 229, pp.123~128 (1997)
  7. "Measuring susceptivity to intergranular corrosion of austenite stainless steels with permanent potential erosion technology", 4, pp.214~217 (1997)
  8. "On oxalic acid corrosion test for stainless steel", 11, pp.78~81 (2001)
  9. "Serial books of corrosion and protection-Local corrosion of metals", pp.23~24 (1987)
  10. "Intergranular corrosion damage evaluation through laser scattering technique", 48, pp.783~796 (2006)
  11. "Intergranular corrosion of 304 stainless steel pickled in acidic electrolytes", 51, pp.949~953 (2004)
  12. "Mechanism of corrosion of AISI 304L stainless steel in the presence of nitric acid condensates", 42, pp.1685~1707 (2000)
  13. "Metallurgical evaluation of stress corrosion cracking in large diameter piping", pp.25~33 (1994)
  14. "Comparing different criteria of EPR method to evaluate the susceptibility to intergranular corrosion Journal of Chinese society for corrosion", 20, pp.146~153 (2000)
  15. "Intercrystalline corrosion and protection of austenitic stainless steel", 3, pp.45~47 (1999)
  16. "Serial books of corrosion and protection-Local corrosion of metals", pp.45~46 (1987)
  17. "Microstructure and intergranular corrosion of the austenitic stainless steel", 358, pp.40~46 (2006)
  18. "compatibility evaluation of stainless steels for their resistance to intergranular corrosion", 233, pp.1361~1363 (1996)
  19. "Study and protection of intergranular corrosion of austenitic stainless steels", 3, pp.78~82 (2004)
  20. "Reason and removing measure of intergranular corrosion of 18-8 stainless steels", 4, pp.213~217 (2002)
  21. "Technology of corrosion and protection of stainless steels", 3, pp.48~53 (1998)
  22. "Serial books of corrosion and protection-Local corrosion of metals", pp.87~88 (1987)
  23. "Serial books of corrosion and protectionLocal corrosion of metals", pp.104~106 (1987)
  24. "Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twininduced grain boundary engineering", 50, pp.2331~2341 (2002)
  25. "Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twininduced grain boundary engineering", 50, pp.2331~2341 (2002)

관련 논문AI추천

Effects of Nb Content and Thermal History on the Mechanical and Corrosion Characteristics of Stainless SteelsHan-CheolChoe, Kwan-HyuKim한국재료부식학회 · CORROSION SCIENCE AND TECHNOLOGY2003 · 제32권 제3호Effect of Thermal History on Pitting Corrosion of High Nitrogen and Low Molybdenum Stainless SteelsHyunyoungChang, KwangsikKim, YoungsikKim한국재료부식학회 · CORROSION SCIENCE AND TECHNOLOGY2003 · 제32권 제2호Effect of the Cooling Rates on the Corrosion Resistance and Phase Transformation of 14Cr-3Mo Martensitic Stainless Steel박용수, Jee-Yong Park한국재료부식학회 · CORROSION SCIENCE AND TECHNOLOGY2006 · 제5권 제1호Effect of the heat treatment parameters on the phase transformationand corrosion resistance of Fe-14Cr-3Mo martensitic stainless steelJeeYong Park, YongSoo Park한국재료부식학회 · CORROSION SCIENCE AND TECHNOLOGY2007 · 제6권 제2호Effect of alloying Copper on the Corrosion Resistance of Stainless Steels in Chloride MediaR.W.Staehle, S.Satoh, T.Ujiro, W.H.Smyrl한국재료부식학회 · CORROSION SCIENCE AND TECHNOLOGY2003 · 제32권 제3호Effects of Copper and Sulfur Additions on Corrosion Resistance and Machinability of Austenitic Stainless SteelHyungJoonKim, SoonTaeKim, YongSooPark한국재료부식학회 · CORROSION SCIENCE AND TECHNOLOGY2002 · 제31권 제2호

이 간행물의 다른 논문 (8건)

Characteristics in Paintability of Advanced High Strength SteelsHa Sun Parkpp. 83-89Critical Design Issues on the Cathodic Protection Systems of ShipsKwang Ki Baek, Ho Il Lee, Chul Hwan Lee, Mong Kyu Jungpp. 90-95Study on HIC and SSC of the Electric Resistance Welded Linepipe SteelWan Keun Kim, Boo Young Yang, Seong Ung Koh, Kyoo Young Kimpp. 96-102Consideration of Methods Evaluating the Growing Process of Stress Corrosion Cracking of the Sensitized 18-8 Austenitic Stainless Steel in High Temperature Water Based on Electric Circuit TheoryYasoji Tsukauepp. 103-111The Importance of Corrosion Control and Protection Technology in the RefineryByong Mu Kim, Sung Lyong Ohpp. 112-119
원문 보기