철근 콘크리트 구조물용 다기능 멀티센서의 부식 모니터링에 관한 연구: Part 1
A Study on the Corrosion Monitoring of Multi-functional Sensors for Reinforced Concrete Structures: Part 1
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
This study represents the result of corrosion monitoring on reinforced concrete specimens by means of multi-functional corrosion monitoring sensors. To confirm the effectiveness of the sensors, eight different kinds of condition were adopted. Test factors were corrosion potential, current, corrosion rate, resistivity, and temperature, which were monitored with the sensors. Through this study, judging corrosion of steel in concrete with single corrosion factor such as corrosion potential was difficult, because many other factors can have an influence on the reaction of corrosion. By using three different kinds of sensors, it could enhance the accuracy of corrosion monitoring.
Abstract
This study represents the result of corrosion monitoring on reinforced concrete specimens by means of multi-functional corrosion monitoring sensors. To confirm the effectiveness of the sensors, eight different kinds of condition were adopted. Test factors were corrosion potential, current, corrosion rate, resistivity, and temperature, which were monitored with the sensors. Through this study, judging corrosion of steel in concrete with single corrosion factor such as corrosion potential was difficult, because many other factors can have an influence on the reaction of corrosion. By using three different kinds of sensors, it could enhance the accuracy of corrosion monitoring.
참고문헌 (6)
- Y. R. Yoo, "Influences of Coating Cycles and Composition on the Properties of Dimensionally Stable Anode for Cathodic Protection", CORROSION SCIENCE AND TECHNOLOGY, 5(2), pp.45~51 (2006), 한국부식방식학회
- 정진아, "Study on the Influence of Stray current Between Sacrificial Anode Cathodic Protection and Impressed Current Cathodic Protection in Marine Environment", CORROSION SCIENCE AND TECHNOLOGY, 11(3), pp.77~81 (2012), 한국부식방식학회[DOI]
- J. Broomfield, , NACE Corrosion Conference, (03387) (2003)
- M. Raupach, , European Federation of Corrosion Publications, 38, pp.120~ (2007)
- S. Muralidharan, , Measurement, 40, pp.600~ (2006)
- J. P. Broomfield, "1stedition", pp.62~ (1997), E & FN SPON