Characterizations of Precipitated Zinc Powder Produced by Selective Leaching Method
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This work investigated the influence of concentration and applied potential on the characteristics of zinc powder (purity, apparent density, morphology, particle size distribution, and particle zeta potential) produced by the electrochemical process from waste brass. High-purity zinc powder is obtained using selective leaching of industrial brass waste in acidic, neutral, and alkaline solutions. The free immersion method with and without voltage using linear polarization technique is used. In the electrochemical process, hydrochloric acid HCl in three different concentrations (0.1, 0.2, and 0.3) M is used. The time and the distance between the electrodes are set to be 30 min and 3 cm, respectively. It has been found that the percentage purity is 98%, 96%, and 94% for the acidic, neutral, and alkaline solutions, respectively. In addition, the morphology of zinc powder analyzed by SEM was dendritic and mossy. It has been recorded that the purity of zinc increases with the increase of the concentration and applied potential. The highest value of purity for zinc powder was %98.58 in 1000 mV and 0.3M concentration for graphite cathode.
Abstract
This work investigated the influence of concentration and applied potential on the characteristics of zinc powder (purity, apparent density, morphology, particle size distribution, and particle zeta potential) produced by the electrochemical process from waste brass. High-purity zinc powder is obtained using selective leaching of industrial brass waste in acidic, neutral, and alkaline solutions. The free immersion method with and without voltage using linear polarization technique is used. In the electrochemical process, hydrochloric acid HCl in three different concentrations (0.1, 0.2, and 0.3) M is used. The time and the distance between the electrodes are set to be 30 min and 3 cm, respectively. It has been found that the percentage purity is 98%, 96%, and 94% for the acidic, neutral, and alkaline solutions, respectively. In addition, the morphology of zinc powder analyzed by SEM was dendritic and mossy. It has been recorded that the purity of zinc increases with the increase of the concentration and applied potential. The highest value of purity for zinc powder was %98.58 in 1000 mV and 0.3M concentration for graphite cathode.
참고문헌 (17)
- R. C. Newman, "2.05-Dealloying", Shreir's Corrosion, 2, pp.801~ (2010)[DOI]
- R. W. Revie, "Corrosion and Corrosion Control:An Introduction to Corrosion Science and Engineering", pp.43~48 (2008), John Wiley & Sons, Inc
- C. D. S. Tuck, "Reference Module in Materials Science and Materials Engineering", pp.443~470 (2016), Elsevier Inc
- R. H. Abd alster, "International Journal of Mechanical Engineering, Electrodeposition of Zinc from Galvanized Steel", Journal of University of Babylon for Engineering Sciences, 27, pp.394~ (2019)[DOI]
- M. F. Abd, "The effect of Immersion Period on the Dezincification Behavior of α -Brass Alloy Waste", International Journal of Mechanical Engineering, 7, pp.543~ (2022)
- T. S. Weisser, "The De-alloying of Copper Alloys", Studies in Conservation, 20, pp.207~ (1975)[DOI]
- G. D. Walker, "An SEM and Micro analytical Study of Inservice Dezincification of Brass", Corrosion, 33, pp.262~ (1977)[DOI]
- J. Weissmüller, "Nanoporous Metals by Alloy Corrosion:Formation and Mechanical Properties", MRS Bulletin, 34, pp.577~ (2009)[DOI]
- J. Erlebacher, "Nanoporous Gold FROMan Ancient Technology to a High-Tech Materia", pp.11~29 (2012), RSC Nanoscience and Nanotechnology, Royal Society of Chemistry
- K. Ismail, "Evaluation of cysteine as environmentally friendly corrosion inhibitor for copper in neutral and acidic chloride solutions", Electrochimica Acta, 52, pp.7811~ (2007)[DOI]
- S. Zaferani, "Application of eco-friendly products as corrosion inhibitors for metals in acid pickling processes—A review", Journal of Environmental Chemical Engineering, pp.1652~ (2013)[DOI]
- E. S. M. Sherif, "Inhibition of copper corrosion in acidic chloride pickling solutions by 5-(3-aminophenyl)-tetrazole as a corrosion inhibitor", Corrosion Science, 50, pp.3439~ (2008)[DOI]
- S. M. Milic, "Some aspects of copper corrosion in presence of benzotriazole and chloride ions", Corrosion Science, 51, pp.28~ (2009)[DOI]
- G. Abd El-Hafez, "The use of cysteine, Nacetyl cysteine and methionine as environmentally friendly corrosion inhibitors for Cu-10Al-5Ni alloy in neutral chloride solutions", Electrochimica Acta, 108, pp.860~ (2013)[DOI]
- Yaofu Zhang, "Effects of pH, chloride, bicarbonate, and phosphate on brass dezincification", Journal-American Water Works Association, 103, pp.90~ (2011)[DOI]
- Oleg D. Neikov, "Handbook of Non-Ferrous Metal Powders: Technologies and Applications", pp.3~62 (2019), Elsevier
- Firas F. Sayyid, "Corrosion Protection Effectiveness and Adsorption Performance of Schiff Base-Quinazoline on Mild Steel in HCl Environment", Corrosion Science and Technology, 21, pp.77~ (2022)[DOI]