Phase-Field Modelling of Zinc Dendrite Growth in ZnAlMg Coatings
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In the present work, a phase-field model for dendritic solidification is applied to hot-dip ZnAlMg coatings to elucidate the morphology of zinc dendrites and the solute segregation leading to the formation of eutectics. These aspects define the microstructure that conditions the corrosion resistance and the mechanical behaviour of the coating. Along with modelling phase transformation and solute diffusion, the implemented model is partially coupled with the tracking of crystal orientation in solid grains, thus allowing the effects of surface tension anisotropy to be considered in multi-dendrite simulations. For this purpose, the composition of a hot-dip ZnAlMg coating is assimilated to a dilute pseudo-binary system. 1D and 2D simulations of isothermal solidification are performed in a finite element solver by introducing nuclei as initial conditions. The results are qualitatively consistent with existing analytical solutions for growth velocity and concentration profiles, but the spatial domain of the simulations is limited by the required mesh refinement.
Abstract
In the present work, a phase-field model for dendritic solidification is applied to hot-dip ZnAlMg coatings to elucidate the morphology of zinc dendrites and the solute segregation leading to the formation of eutectics. These aspects define the microstructure that conditions the corrosion resistance and the mechanical behaviour of the coating. Along with modelling phase transformation and solute diffusion, the implemented model is partially coupled with the tracking of crystal orientation in solid grains, thus allowing the effects of surface tension anisotropy to be considered in multi-dendrite simulations. For this purpose, the composition of a hot-dip ZnAlMg coating is assimilated to a dilute pseudo-binary system. 1D and 2D simulations of isothermal solidification are performed in a finite element solver by introducing nuclei as initial conditions. The results are qualitatively consistent with existing analytical solutions for growth velocity and concentration profiles, but the spatial domain of the simulations is limited by the required mesh refinement.
참고문헌 (40)
- H. E. Chaieb, "In-situ localization of damage in a Zn-Al-Mg coating deposited on steel by continuous hot-dip galvanizing", Scripta Materialia, 243, pp.115960~ (2024)[DOI]
- M. Ahmadi, "Genesis and mechanism of microstructural scale deformation and cracking in ZnAlMg coationgs", Materials & Design, 186, pp.108364~ (2020)[DOI]
- E. De Bruycker, "Zn-Al-Mg Coatings: Thermodynamic Analysis and Microstructure Related Properties", Materials Science Forum, 539–543, pp.1276~ (2007)[DOI]
- E. Baril, "Studies of the morphology of the Al-rich interfacial layer formed during the hot dip galvanazing of steel sheet", Metallurgical and Materials Transactions A, 30, pp.681~ (1999)[DOI]
- A. R. Marder, "The metallurgy of zinc-coated steel", Progress in Materials Science, 45, pp.191~ (2000)[DOI]
- W. R. Osório, "The effect of the dendritic microstructure on the corrosion resistance of Zn-Al alloys", Journal of Alloys and Compounds, 397, pp.179~ (2005)[DOI]
- C. Yaom, "The Solidification and Corrosion Behavior Determination of the Ti", B Added Zn-Al-Mg Alloys, 2016, pp.670, 239~
- T. Prosek, , Corrosion Science, 110, pp.71~ (2016)[DOI]
- W. R. Osório, "The role of macrostructural morphology and grain size on the corrosion resistance of Zn and Al castings", Materials Science and Engineering A, 402, pp.22~ (2005)[DOI]
- J. Elvins, "The effect of magnesium additions on the microstructure and cut edge corrosion resistance of zinc aluminium alloy galvanised steel", Corrosion Science, 50, pp.1650~ (2008)[DOI]
- G. Jiang, "Microstructure and Corrosion Resistance Property of a Zn-Al-Mg Alloy with Different Solidification Processes", MATEC Web of Conferences, 109, pp.01004~ (2017)[DOI]
- S. Li, "Study on the Corrosion Mechanism of Zn-5Al-0.5Mg-0.08Si Coating", Journal of Metallurgy, 2011, pp.917469~ (2011)[DOI]
- J. Tanaka, "Effect of Mg and Si on the Microstructure and Corrosion Behavior of Zn-Al Hot Dip Coatings on Low Carbon Steel", ISIJ International, 42, pp.80~ (2002)[DOI]
- N. Provatas, "Phase-Field Methods in Materials Science and Engineering" (2011), John Wiley & Sons
- A. Karma, "Phase-field method for computationally efficient modelling of solidification with arbitrary interface kinetics", Physical Review E, 53, pp.R3017~ (1996)[DOI]
- B. Echebarria, "Quantitative phase-field model of alloy solidification", Physical Review E, 70, pp.061604~ (2004)[DOI]
- J. C. Ramirez, "Phase-field modelling of binary alloy solidification with coupled heat and solute diffusion", Physical Review E, 69, pp.051607~ (2004)[DOI]
- H. Wang, "Thermodynamic principles principles for phase-field modelling of alloy solidification", Current Opinion in Chemical Engineering, 7, pp.6~ (2015)[DOI]
- T. Pinomaa, , Philosophical Transactions of the Royal Society A, 380, pp.20200319~ (2022)[DOI]
- C. Sarkis, "Phase-field modeling of dendritic solidification for an Al-4.5wt%Cu atomized droplet using an anisotropic adaptive mesh", PhD, pp.2016
- S. G. Kim, "Phase-field simulations of dendritic morphologies in hot-dip galvanized Zn-Al coatings", Computational Materials Science, 186, pp.110060~ (2021)[DOI]
- E. De Bruycker, "Experimental study and microstructure Simulation of Zn-Al-Mg coationgs", Revue de Metallurgie Paris, 102, pp.543~ (2005)[DOI]
- J. P. Mogeritsch, , Proc. VII International Conference on Computational Methods for Coupled Problems in Science and Engineering (Coupled Problems 2017)Conf, pp.1171~1182 (2017)
- Z. Guo, "On solving the 3-D phase field equations", Computer Physics Communications, 190, pp.89~ (2015)[DOI]
- T. Z. Gong, "Fast simulations of a large number of crystals growth in centimeter-scale during alloy solidification via nonlinearly preconditioned quantitative phase-field formula", Computational Materials Science, 147, pp.338~ (2018)[DOI]
- Y. Chen, "A quantitative phase-field model combining with fronttracking method for polycrystalline solidification of alloys", Computational Materials Science, 104, pp.155~ (2015)[DOI]
- J. A. Warren, "Extending phase field models of solidification to polycrystalline materials", Acta Materialia, 51, pp.6035~ (2003)[DOI]
- R. Kobayashi, "Modeling the formation and dynamics of polycrystals in 3D", Physica A : Statistical Mechanics and its Applications, 356, pp.127~ (2005)[DOI]
- H. Henry, "Orientation-field model for polycrystalline solidification with a singular coupling between order and orientation", Physical Review B, 86, pp.054117~ (2012)[DOI]
- T. Pusztai, "Phase field theory of polycrystalline solidification in three dimensions", Europhysics Letters, 71, pp.131~ (2005)[DOI]
- M. Ahmadi, "Unraveling dislocation mediated plasticity and strengthening in crack-resistant ZnAlMg coatings", International Journal of Plasticity, 144, pp.103041~ (2021)[DOI]
- S. Ghosh, "Effects of solid-solid boundary anisotropy on directional solidification microstructures", PhD, pp.2015
- "COST 507Thermochemical database for light metal alloys" (1998)[URL]
- S. Yang, "Comprehensive Evaluation of Aluminum Diffusivity in Liquid Zinc", Metallurgical and Materials Transactions A, 42, pp.1785~ (2011)[DOI]
- T. Gancarz, "Physicochemical Properties of Sb, Sn, Zn, and Sb-Sn System", International Journal of Thermophysics, 34, pp.250~ (2013)[DOI]
- K. Keşlioğlu, "Experimental determination of solid-liquid interfacial energy for Zn solid solution in equilibrium with the Zn-Al eutectic liquid", Metallurgical and Materials Transactions A, 35, pp.3665~ (2004)[DOI]
- M. Erol, "Measurement of Solid-Liquid Interfacial Energy for Solid Zn in Equilibrium with the ZnMg Eutectic Liquid", Metallurgical and Materials Transactions A, 38, pp.1539~ (2007)[DOI]
- H. B. Aaron, "Diffusion-Limited Phase Transformations: A Comparison and Critical Evaluation of the Mathematical Approximations", Journal of Applied Physics, 41, pp.4404~ (1970)[DOI]
- S. Kaboli, "Effect of Process Variables on the Grain Size and Crystallographic Texture of Hot-Dip Galvanized Coatings", Metallurgical and Materials Transactions A, 45, pp.3938~ (2014)[DOI]
- S. Vakili, "On the numerical evaluation of local curvature for diffuse interface models of microstructure evolution", Procedia Computer Science, 108, pp.1852~ (2017)[DOI]
