UNS G41400 강의 인산염 표면 처리에 따른 국부 부식 저항성
Effect of Phosphate Surface Treatment on the Localized Corrosion Resistance of UNS G41400 Steel
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study investigated the localized corrosion behavior of a UNS G41400 steel surface treated with manganese phosphate. The phosphate coating, primarily composed of oxygen (O), phosphorus (P), and manganese (Mn) elements, had an approximate thickness of 6 µm. The particles comprising the coating varied in size by several micrometers; smaller particles were mainly composed of O, P, Mn, and iron (Fe) elements, indicating incomplete formation of the manganese phosphate film. Potentiodynamic polarization curves revealed a decrease in anodic current after surface treatment and a shift in corrosion potential toward the noble direction after treatment. After immersion in a 3.5 wt% NaCl solution for 96 hours, localized corrosion was observed, with some regions retaining residual phosphate film. Even though localized corrosion occurred on the treated surface, it was less severe than that on the untreated UNS G41400 steel surface. These findings suggest that manganese phosphate coating improved resistance to localized corrosion.
Abstract
This study investigated the localized corrosion behavior of a UNS G41400 steel surface treated with manganese phosphate. The phosphate coating, primarily composed of oxygen (O), phosphorus (P), and manganese (Mn) elements, had an approximate thickness of 6 µm. The particles comprising the coating varied in size by several micrometers; smaller particles were mainly composed of O, P, Mn, and iron (Fe) elements, indicating incomplete formation of the manganese phosphate film. Potentiodynamic polarization curves revealed a decrease in anodic current after surface treatment and a shift in corrosion potential toward the noble direction after treatment. After immersion in a 3.5 wt% NaCl solution for 96 hours, localized corrosion was observed, with some regions retaining residual phosphate film. Even though localized corrosion occurred on the treated surface, it was less severe than that on the untreated UNS G41400 steel surface. These findings suggest that manganese phosphate coating improved resistance to localized corrosion.
참고문헌 (13)
- S. R. Yoon, "Properties of Zinc Phosphate Coatings Formed on Cold-Rolled Steel Used for Automobile Body Pannel", Journal of the Corrosion Science Society of Korea, 15, pp.34~ (1986)
- S. R. Yoon, "Effects of Phosphate Coatings on Corrosion Resistance of Painted Cold-Rolled Steel Sheet", Journal of the Corrosion Science Society of Korea, 16, pp.3~ (1987)
- Yasar Totik, "The corrosion behaviour of manganese phosphate coatings applied to AISI 4140 steel subjected to different heat treatments", Surface and Coatings Technology, 200(8), pp.2711~2717 (2006), Elsevier BV[DOI]
- Y. J. Lee, "Improvements of the Performance of Coating Type Chromate Film by the Addition of Phosphate and Colloidal Silica", Journal of the Corrosion Science Society of Korea, 23, pp.131~ (1994)
- Y. J. Park, "Effect of Impurities During Nickel Flash Coating on Phosphate Film in Sulfate Bath", Journal of the Corrosion Science Society of Korea, 27, pp.75~ (1998)
- 변영민, "자동차 부품 Tribology용 인산-망간 화성처리에 있어서 첨가제에 따른 화성피막 특성", 한국표면공학회지, 48(2), pp.56~61 (2015), 한국표면공학회[DOI]
- 김호영, "기계적 연마 전처리가 인산망간 피막의 윤활 특성에 미치는 영향", 한국표면공학회지, 52(6), pp.350~356 (2019), 한국표면공학회[DOI]
- 신철호, "군용차량 휠 조립체 내구성 향상 방법론 연구", 한국산학기술학회논문지, 19(11), pp.521~528 (2018), 한국산학기술학회[DOI]
- C. K. Lee, "Structure and Corrosive Wear Resistance of Plasma-Nitrided Alloy Steels in 3% Sodium Chloride Solutions", CORROSION, 50(11), pp.848~856 (1994), Association for Materials Protection and Performance (AMPP)[DOI]
- Young Tai Noh, "Effects of Al2O3 Additive on Manganese Phosphate Conversion Coating of Carbon Steel", Materials Science Forum, 932, pp.81~90 (2018), Trans Tech Publications, Ltd.[DOI]
- Jakub Duszczyk, "Modified Manganese Phosphate Conversion Coating on Low-Carbon Steel", Materials, 13(6), pp.1416~ (2020), MDPI AG[DOI]
- Ph. Hivart, "Annealing improvement of tribological properties of manganese phosphate coatings", Wear, 219(2), pp.195~204 (1998), Elsevier BV[DOI]
- O. Kevin, "Phosphate conversion coatings", pp.712~719 (2003)