본문 바로가기
KERD
논문KCI 등재

DPS의 설계 방법론 개발 및 보충방식에 따른 효과분석 연구

A Study on the Development of DPS Design Methodology and Effects of Replenishment Methods

1

조회

0

다운로드

2

인용

0

참고문헌

키워드

주제분류경영학

초록

As the E-commerce market grew, the SCM strategy of B2C logistics became significant, focusing on services that quickly pick and deliver small quantities of products ordered by customers. The fourth industrial revolution led to the emergence of an automated fulfillment center to meet the needs of high customer service level. However, it may be difficult to introduce the automated facility because of its long payback period due to high investment cost and the environment of the rented warehouses where the customers may change over time. For this reason, DPS is the most frequently installed the semi-automated facility for the domestic B2C logistics centers. Therefore, this study suggests the DPS design guides and the improved replenishment process introducing the ideas of previous and on-demand replenishment which are implemented at the fulfillment center A where the case study was conducted. The results of this study confirmed that for the most cost-effective DPS operation is when the fixed locations are 100% replenished before picking and the rest of the free locations are replenished as needed while picking. It has been confirmed that the labor cost will be higher when picking starts with too little or too much replenishment, that it is significant to set the proper amount of replenishment for the most efficient operation.

Abstract

As the E-commerce market grew, the SCM strategy of B2C logistics became significant, focusing on services that quickly pick and deliver small quantities of products ordered by customers. The fourth industrial revolution led to the emergence of an automated fulfillment center to meet the needs of high customer service level. However, it may be difficult to introduce the automated facility because of its long payback period due to high investment cost and the environment of the rented warehouses where the customers may change over time. For this reason, DPS is the most frequently installed the semi-automated facility for the domestic B2C logistics centers. Therefore, this study suggests the DPS design guides and the improved replenishment process introducing the ideas of previous and on-demand replenishment which are implemented at the fulfillment center A where the case study was conducted. The results of this study confirmed that for the most cost-effective DPS operation is when the fixed locations are 100% replenished before picking and the rest of the free locations are replenished as needed while picking. It has been confirmed that the labor cost will be higher when picking starts with too little or too much replenishment, that it is significant to set the proper amount of replenishment for the most efficient operation.

참고문헌 (47)

  1. "코로나 사태로 본 쿠팡물류시스템 분석" (2020), 강현창[URL]
  2. 공인택, "AHP 기법을 이용한 물류센터 내 사물인터넷 기반 정보시스템 도입 요인의 중요도 분석", 로지스틱스연구, 27(3), pp.1~12 (2019), 한국로지스틱스학회[DOI]
  3. 구평회, "물류창고에서 Bucket Brigade를 활용한 오더피킹에 대한 연구", 산업공학(IE interfaces), 21(3), pp.333~342 (2008), 대한산업공학회
  4. 권기덕, "무인 자동창고 운영을 위한 WMS 구현에관한 연구", 석사, pp.2016
  5. 김병기, "물류센터 피킹을 위한 재고 보충방식 개선방안 연구", 대한산업공학회 추계학술대회 논문집, pp.1688~1694 (2017)
  6. 김병기, "혼합보충 방식의 오더피킹에 의한 전자상거래 물류센터의 생산성 개선", 대한산업공학회지, 45(1), pp.53~69 (2019), 대한산업공학회[DOI]
  7. 김인규, "면세점 물류센터의 피킹업무 효율 향상을위한 휴리스틱 방법에 관한 연구", 박사, pp.2016
  8. 김진형, "Automatic Picking System에서의 화물 보충을 위한 Robot 운영 모델 연구", 석사, pp.2016
  9. 김효섭, "SCM에 의한 물류센터의 효율적인 운영방안에 관한 연구", 석사, 물류유통, pp.2009
  10. 남현정, "4차 산업혁명에 따른 물류 산업 유형 구분과 대응 방안", 경영컨설팅연구, 18(3), pp.275~286 (2018), 한국경영컨설팅학회
  11. 라인승, "이커머스 풀필먼트 서비스의 혁신성과 신뢰성이 소비자 만족 및 서비스 지속이용 의도에 미치는영향", 석사, pp.2019
  12. 박용석, "서비스 운영 특성을 고려한 온라인 유통의풀필먼트 전략", 석사, pp.2018
  13. 박정현, "유통물류센터의 구축방향과 보관설비 유형별 최적 보관면적 산출에 관한 연구", 박사, pp.2019
  14. "‘쿠팡식 풀필먼트’ 수면위, 이커머스 판 흔드나" (2018), 박정훈[URL]
  15. "베일 벗은 홈플러스 풀필먼트센터…마트를 물류거점으로" (2019), 박준호[URL]
  16. "온라인에 사활 건 홈플러스, 점포 FC 2⋅3호점 추가 구축" (2019), 박지호[URL]
  17. "창고 넘은 아마존, 풀필먼트가 커머스의 미래인 이유" (2017), 박찬재[URL]
  18. "온라인 쇼핑, ‘풀필먼트’ 주목하라" (2016), 배종완[URL]
  19. "AI 집합체…아마존 물류센터는 어떻게 돌아갈까" (2018), 백지영[URL]
  20. "스마트물류 / 인건비 상승으로 물류자동화도입 확산 전망" (2018), 송세라[URL]
  21. 신승목, "사물인터넷을 이용한 물류창고관리시스템개선에 관한 연구 : T사의 사례를 중심으로", 석사, pp.2015
  22. "Part1. 물류가 스마트 하다는 것은?" (2020), 신인식[URL]
  23. "풀필먼트에 대한 불편한 진실" (2017), 엄지용[URL]
  24. "그것이 알고싶다 : 아마존 편" (2014), 오린아[URL]
  25. 원대연, "오더 완결률을 이용한 쎌 픽킹 시스템", 석사, 산업시스템공학, pp.2010
  26. 유강철, "물류센터의 오더픽킹 최적설계를 위한 DPS와 DAS의 생산성 비교", 한국SCM학회지, 12(2), pp.111~120 (2012), 한국SCM학회
  27. 유헌종, "물류센터 관리자의 조직 내 관계수행 능력이 물류센터 성과에 미치는 영향 연구", 로지스틱스연구, 23(2), pp.21~36 (2015), 한국로지스틱스학회[DOI]
  28. 이다예, "국내 수도권 임대 물류센터 입지여건 분석", 로지스틱스연구, 23(4), pp.101~113 (2015), 한국로지스틱스학회[DOI]
  29. 이재광, "RFID를활용한 물류센터 관리 방안", 전자상거래학회지, 6(3), pp.23~40 (2005)
  30. "대형마트 물류센터 전쟁…’라스트 마일’ 선점 총력전" (2019), 이재은[URL]
  31. "유통 혁신의 현장① 신세계 ‘네오002’ 김포센터 “입고부터 출고까지 자동화”" (2019), 이현주[URL]
  32. 장호영, "다복도 구조의 오더피킹시스템의경로 최적화", 대한산업공학회 춘계공동학술대회 논문집, pp.1332~1339 (2009)
  33. 조규성, "피킹지역과 저장지역을 고려한 물류센터의 적정계획에 관한 연구", 박사, 산업공학, pp.2003
  34. "아마존, 로봇들이 일하는 미래형 물류센터공개" (2014), 조나리[URL]
  35. 황현철, "모바일 로봇 기반 온라인 풀필먼트센터의 레이아웃 최적화에 관한 연구", 박사, pp.2020
  36. 황홍석, "시뮬레이션방법을 이용한 물류센터의 피킹 및 재보충설비의 능력산정", 대한산업공학회 춘계공동학술대회 논문집, pp.951~956 (2002)
  37. Caron, F., "Layout design in manual picking systems : a simulation approach", Integrated Manufacturing Systems, 11(2), pp.94~104 (2000)
  38. Ekren, B. Y., "Warehouse design under class-based storage policy of shuttlebased storage and retrieval system", IFACPapersOnLine, 48(3), pp.1152~1154 (2015)
  39. Enslow, B., "Internet fulfillment : The next supply chain frontier", Achieving Supply Chain Excellence through Technology(ASCET), 2, pp.251~257 (2000)
  40. Gu, J., "Research on warehouse operation : A comprehensive review", European journal of operational research, 177(1), pp.1~21 (2007)
  41. Gu, J., "Solving the forward-reserve allocation problem in warehouse order picking systems", Journal of the Operational Research Society, 61(6), pp.1013~1021 (2010)
  42. Nazzal, D., "Pull-driven Order Fulfillment in Distribution Centers", 15th IMHRC Proceedings (2018), Georgia Southern University
  43. Ramaa, A., "Impact of warehouse management system in a supply chain", International Journal of Computer Applications, 54(1), pp.14~20 (2012)
  44. Rosenwein, M. B., "A comparison of heuristics for the problem of batching orders for warehouse selection", International Journal of Production Research, 34(3), pp.657~664 (1996)
  45. Smith, B. L, "Fulfillment center storage optimization", Doctor, pp.2018
  46. Van den Berg, J. P., "Forward-reserve allocation in a warehouse with unit-load replenishments", European journal of operational research, 111(1), pp.98~113 (1998)
  47. Xia, X, "Impact of Integrating Zone By-Pass Conveyor on the Performance of a Pick-to-light Order picking system", Doctor, pp.2012

관련 논문AI추천

이 간행물의 다른 논문 (5건)