쌍끌이 기선저인망의 유수저항 특성 및 모형 실험시의 축척비 영향
Flow resistance of bottom pair trawl nets and scale effect in their model expriments
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The purpose of this study is to identify the flow resistance of the bottom pair trawl nets. The bottom pair trawl nets being used in fishing vessel (100G/T, 550ps) was selected as a full-scale net, and 1/10, 1/25 and 1/50 of the model nets were made. Converted into the full-scale net by Tauti's modeling rule and Kim's modeling rule, when resistance coefficient k of each net was calculated by substituting into above equation for flow resistance R and wall area of nets S values of each net u. Because resistant coefficient k decreases exponentially according as flow velocity u increases to make k=cu-m, C and m values of each net were compared. As a result, as the model was smaller, c and m values was smaller in the two rule into standard of 1/10 model value, decrease degree of 1/25 model was almost same in the two rule, decrease degree of 1/50 model was very big in Tauti's modeling rule. Therefore, in the result of experiment, because average of c and m values for similarly 1/10 and 1/25 model were given c=4.9 (kgf․s2/m4) and m=0.45, R (kgf) of bottom pair trawl net could show R=4.9Su1.55 using these values. As in the order of cod-end, wing and bag part for 1/25 and 1/50 model net were removed in turn, measured flow resistance of each, converted into the full-scale, total resistance of the net and the resistance of each part net were calculated. The resistance ratio of each part for total net was not same in 1/25 and 1/50 model each other, but average of two nets was perfectly same area ratio of each part as the wing, bag and cod-end part was 43%, 45% and 12%. However, the resistance of each part divided area of the part, calculated the resistance of per unit area, wing and bag part were not big difference each other, while the resistance of cod-end part was very large.
Abstract
The purpose of this study is to identify the flow resistance of the bottom pair trawl nets. The bottom pair trawl nets being used in fishing vessel (100G/T, 550ps) was selected as a full-scale net, and 1/10, 1/25 and 1/50 of the model nets were made. Converted into the full-scale net by Tauti's modeling rule and Kim's modeling rule, when resistance coefficient k of each net was calculated by substituting into above equation for flow resistance R and wall area of nets S values of each net u. Because resistant coefficient k decreases exponentially according as flow velocity u increases to make k=cu-m, C and m values of each net were compared. As a result, as the model was smaller, c and m values was smaller in the two rule into standard of 1/10 model value, decrease degree of 1/25 model was almost same in the two rule, decrease degree of 1/50 model was very big in Tauti's modeling rule. Therefore, in the result of experiment, because average of c and m values for similarly 1/10 and 1/25 model were given c=4.9 (kgf․s2/m4) and m=0.45, R (kgf) of bottom pair trawl net could show R=4.9Su1.55 using these values. As in the order of cod-end, wing and bag part for 1/25 and 1/50 model net were removed in turn, measured flow resistance of each, converted into the full-scale, total resistance of the net and the resistance of each part net were calculated. The resistance ratio of each part for total net was not same in 1/25 and 1/50 model each other, but average of two nets was perfectly same area ratio of each part as the wing, bag and cod-end part was 43%, 45% and 12%. However, the resistance of each part divided area of the part, calculated the resistance of per unit area, wing and bag part were not big difference each other, while the resistance of cod-end part was very large.
참고문헌 (11)
- Cho SK, "The model experiment on the pair midwater trawl", Bull Kor Soc Fish Tech, 31(3), pp.228~239 (1995)
- Dickson W, "Modern fishing gear of world 1", pp.166~174 (1959), Fishing News
- Fridman AL., "Theory and design of commercial fishing gear (Translated from Russian)", pp.122~191 (1973), Israel programs for scientific translations
- Jang CS, "A study on the pair midwater trawlingⅣ-mouth performance and working depth of the full scale net", Bull Kor Soc Fish Tech, 32(1), pp.7~15 (1996)
- Kawakami T., "Modern fishing gear of the world-Ⅱ", pp.471~481 (1964)
- Kim DA., "Flow resistance and modeling rule of fishing netsⅢ-Establishment of modeling rule and its theoretical examination", J Kor Fish Soc, 30(5), pp.691~699 (1997)
- Kim DA., "Fishing gear design studies", pp.140~182 (1999), Pyeong-hwa publishing Co
- Kim JM, "Model test on the opening efficiency of the midwater pair trawl net", Bull Kor Soc Fish Tech, 36(2), pp.73~88 (2000)
- Kwon BG., "Model test on the high performance of the midwater pair trawl net", Bull Kor Soc Fish Tech, 31(4), pp.340~349 (1995)
- Lee BG, "A study on the pair midwater trawlingⅠ-mouth performance of the model net", Bull Kor Soc Fish Tech, 31(1), pp.29~44 (1995)
- Tauti M, "A relation between experiments on model and full scale of net", Bull Jap Soc Sci Fish, 3(4), pp.171~177 (1934)[DOI]