모형실험과 시뮬레이션을 통한 활어 이송용 예인 가두리의 수직 및 수평 전개력 추정
Estimation of vertical and horizontal spreading force of the towing cage for transporting the live fish by model test and simulation
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Nowadays, consumption of fisheries products is increasing. There are several factors, one of which is a quantitative development through aquaculture. Another factor is an increase qualitative consumption of fish which require that fish be supplied alive. This requires a lot of technical effort to transport the live fish that have low survival rate(c.f. tuna and mackerel) in coastal waters and in the open sea. To develop a towing cage for transporting the live fish, model test in a circulate water channel and simulation by computer tool were carried out. In order to spread vertically, floats were attached at the upper part of the cage, and iron chains attached at the lower part of the cage. For horizontal spreading, kites were attached on the cage. The tension and spreading performance of the cage were measured. The result shows that the tension and reduction ratio of inside volume of the cage were tended to increase with increased towing speeds. The suitable operation condition in towing cage was 1.0 m/s towing speeds with vertical spreading force 8.7 kN, horizontal spreading force 5.6 kN; in this case the reduction ratio of inside volume of the cage was estimated as 25%.
Abstract
Nowadays, consumption of fisheries products is increasing. There are several factors, one of which is a quantitative development through aquaculture. Another factor is an increase qualitative consumption of fish which require that fish be supplied alive. This requires a lot of technical effort to transport the live fish that have low survival rate(c.f. tuna and mackerel) in coastal waters and in the open sea. To develop a towing cage for transporting the live fish, model test in a circulate water channel and simulation by computer tool were carried out. In order to spread vertically, floats were attached at the upper part of the cage, and iron chains attached at the lower part of the cage. For horizontal spreading, kites were attached on the cage. The tension and spreading performance of the cage were measured. The result shows that the tension and reduction ratio of inside volume of the cage were tended to increase with increased towing speeds. The suitable operation condition in towing cage was 1.0 m/s towing speeds with vertical spreading force 8.7 kN, horizontal spreading force 5.6 kN; in this case the reduction ratio of inside volume of the cage was estimated as 25%.
참고문헌 (11)
- Cha BJ, "Numerical simulation on the dynamic characteristics of the trawl system", 박사, pp.2003
- The state of world fisheries and aquaculture, "FAO", 3~100 (2012)
- Hosseini SA, "The sinking performance of the tuna purse seine gear with largemeshed panels using numerical method", Fish Sci, 77, pp.503~520 (2011)[DOI]
- Kim HY, "Dynamic simulation of the behavior of purse seine gear and sea-trial verification", Fish Res, 88(1-3), pp.109~119 (2007)[DOI]
- Kreiberg H, "A production-scale towable netpen for efficient high-volume transport of pacific herring: Design and comparative performance", Aquacult Eng, 6, pp.289~299 (1987)[DOI]
- Lee CW, "Dynamic simulation of a fish cage system subjected to currents and waves", Ocean Eng, 35, pp.1521~1532 (2008)[DOI]
- Lee JH, "Dynamic simulation of tuna longline gear using numerical methods", Fish Sci, 71, pp.1287~1294 (2005)[DOI]
- Malcolm B, "Cage aquaculture", pp.149~164 (2008), Fishing news books
- Development of blue fin tuna transport system, "NFRDI", 8~21 (2012)
- Rottiers, Donald V, "Towable cage for studies of smoltification in Atlantic salmon", The Progressive Fish-Culturist, 53(2), pp.124~127 (1991)[DOI]