이산화티탄 광촉매 졸(sol)의 실내환경 코팅에 의한 실내공기질 개선
Improvement of Indoor Air Quality by Coatimg of Indoor Materials of TiO2 Photocatalyst Sol
1
조회
0
다운로드
4
인용
0
참고문헌
초록
Abstract
Three methods for VOCs emissions control in indoor air are reduction at the source, ventilation between indoor and outdoor, and removal. The best alternative should be to replace highly emitting sources with sources having low emissions, but the pertinent information on VOCs is not always available from manufactures. Other ways of improving indoor air quality are needed. It is to increase the outside fresh-air flow to dilute the pollutants, but this method would generally provide only a dilution effect without destruction in residence. An ideal alternative to existing technologies would be a chemical oxidation process able to treat large volumes of slightly contaminated air at normal temperature without additional oxidant such as ozone generator and ion generator. Photocatalytic oxidation(PCO) represents such a process. It is characterized by a surface reaction assisted by light radiation inducing the formation of superoxide, hydroperoxide anions, or hydroxyl radicals, which are powerful oxidants. In comparison with other VOCs removal methods, PCO offers several advantages. The purpose of this study was to explore the possibilities for photocatalytic purification of slightly contaminated indoor air by using visible light such as flurescent visible light(FVL). In this study, a PCO of relatively concentrated benzene using common FVL lamps was investigated as batch type and total volatile organic compounds(TVOCs) using a common FVL lamp and penetrated sun light over window. The results of this study shown the possibility of TiO2 photocatalyst application in the area of indoor air quality control.
참고문헌 (20)
- "The right to healthy indoor air: status by 2002", 13, pp.50~53 (2003)
- "Indoor air quality and health", 33, pp.4535~4564 (1999)
- "a comparative assessment of environmental problems" (1987)
- "Characterizing air emissions from indoor sources" (1995)
- "and health outcomes in parisian modern office workers", pp.100~112 (1997), Vincent
- "Determination of air exchange rates of rooms and deposition factors for fine particles by means of photoelectric aerosol sensors", 8, pp.246~254 (2000)
- "Characterization of indoor air quality using multiple measurements of nitrogen dioxide" (2004), Indoor Air, In Press
- "Source testing and data analysis for exposure and risk assessment of indoor pollutant sources", pp.367~375 (1996), ASTM STP 1287
- "실내공기질 관리 및 측정", pp.102~115 (2003)
- "Potential exposure and traffic contribution to indoor air quality of shoe-stalls near busy road in Korea", 323, pp.99~105 (2004)
- "Rates and mechanism of NO2 removal from indoor air by residential materials", pp.643~654 (1989)
- "Heterogeneous photocatalysis for control of volatile organic compounds in indoor air", 46, pp.891~898 (1996)
- "Batch studies on closed loop air stripping process", 28(9), pp.2011~2020 (1995)
- "The gas-phase photocatalytic mineralization of benzene on porous titania-based catalysts", 6, pp.209~224 (1995)
- "실내공기질 공정시험방법 작성 방향", pp.59~69 (2003), 대한주 택공사 주택도시연구원
- "VOC 물질중 에탄올 광분해 반응을 위한 TiO2 촉매의 제조 변수 고찰", 17(4), pp.363~370 (2001)
- "Vanadia catalysts supported on mixed TiO2-Al2O3 supports Effect of composition on the structure and acidity", 157, pp.368~379 (1995)
- "Photocatalytic degradation of 1-octanol on anchored titanium oxide and on TiO2 power catalysts", 158, pp.97~101 (1996)
- "TiO2 photocatalysis for indoor air applications effects of humidity and trace contaminant levels on the oxidation rates of formaldehyde, toluene, and 1,2-butadiene", 29(5), pp.1223~1231 (1995)
- "Photocatalyst oxidation of volatile organic compounds using fluorescent visible light", 52, pp.845~854 (2002)