산업부산물을 이용한 친환경 연소재벽돌의 제조특성
Manufacturing Characteristics of Environmental-friendly Waste Ash Brick with Industrial By-Products
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The main objective of this study was to evaluate the effects on shape and size, compressive strength, water absorption and heavy metals leaching with various weight mixing ratios in waste ash brick products using waste recycling MSWI(Municipal Solid Waste Incinerator) bottom ash, steel slag and waste building material. The manufacturing processes for the waste ash brick consist of screening, mixing, conveyor transmission, compaction·forming, and curing steps of raw materials. The weight mixing ratios of steel slag around bottom ash were adjusted within the ranges of 10% to 30%. The reported results show that the width and thickness of the manufactured waste ash brick could be satisfied with 90 ± 2 mm and 57 ± 2 mm, respectively which are K.S. standards of products qualities. And in case of length, only 20-Ba50Ss30, 20-Ba60Wb20 and 20-Ba50Wb30 for the mixing ratios could be satisfied with 190 ± 2 mm that is K.S. standards of products quality. The compressive strength and water absorption for 20-Ba50Ss30 and 20-Ba70Wb10 were over 8 N/mm2 and below 15% respectively that are K.S. standards of manufactured waste ash brick. The results of tests for the heavy metals leaching in the all manufactured waste ash bricks are also passed to the wastes management regulations. The cost analysis of 20-Ba50Ss30 is evaluated. The manufacturing cost is evaluated 34.3 won/brick with 8 hours and 20tons of raw material per day. Incinerators with problems in bottom ash disposal can therefore derive significant benefits from the application of waste ash brick production.
Abstract
The main objective of this study was to evaluate the effects on shape and size, compressive strength, water absorption and heavy metals leaching with various weight mixing ratios in waste ash brick products using waste recycling MSWI(Municipal Solid Waste Incinerator) bottom ash, steel slag and waste building material. The manufacturing processes for the waste ash brick consist of screening, mixing, conveyor transmission, compaction·forming, and curing steps of raw materials. The weight mixing ratios of steel slag around bottom ash were adjusted within the ranges of 10% to 30%. The reported results show that the width and thickness of the manufactured waste ash brick could be satisfied with 90 ± 2 mm and 57 ± 2 mm, respectively which are K.S. standards of products qualities. And in case of length, only 20-Ba50Ss30, 20-Ba60Wb20 and 20-Ba50Wb30 for the mixing ratios could be satisfied with 190 ± 2 mm that is K.S. standards of products quality. The compressive strength and water absorption for 20-Ba50Ss30 and 20-Ba70Wb10 were over 8 N/mm2 and below 15% respectively that are K.S. standards of manufactured waste ash brick. The results of tests for the heavy metals leaching in the all manufactured waste ash bricks are also passed to the wastes management regulations. The cost analysis of 20-Ba50Ss30 is evaluated. The manufacturing cost is evaluated 34.3 won/brick with 8 hours and 20tons of raw material per day. Incinerators with problems in bottom ash disposal can therefore derive significant benefits from the application of waste ash brick production.
참고문헌 (30)
- The 4th Basic Plans for Resource Recycling, "Ministry of Environment", ~ (2008)
- Lim, J. W., "A study on institutional and technical standards for recycling of waste incineration ash", Proceedings of 2007 Annual Korean Solid Wastes Engineering Society Autumn, pp.224~227 (2007), Ewha Womans University
- Recycling of MSWI ash as construction materials, "Yun, J. M", Incheon Regional Environmental Technology Development Center, ~ (2004)
- 이처근, "건설재로서 하수슬러지 소각재의 활용", 한국지반환경공학회 논문집, 4(4), pp.25~34 (2003), 한국지반환경공학회
- Song, K. S, "A study on solidification of hazardous wastes using reagent containing lingnin sulfonate and it's utilization", 석사, pp.2003
- Park, H. S, "Characteristics and stabilization of municipal solid waste incineration plant ash", Journal of Korean Solid Wastes Engineering Society, 18(1), pp.722~730 (2001)
- 정현태, "도시 폐기물 소각재의 물리·화학적 특성 및 용출 방법에 따른 중금속 용출 특성 평가 연구", 한국폐기물자원순환학회지, 19(4), pp.407~417 (2002), 한국폐기물자원순환학회
- Krammart, P, "Properties of cement made by partially replacing cement raw materials with municipal solid waste ashes and calcium carbide waste", Construction and Building Materials, 18(8), pp.579~853 (2004)
- Shih, P. H, "Replacement of raw mix in cement production by municipal solid waste incineration ash", Cement and Concrete Research, 33(11), pp.1831~1836 (2003)
- Polettini, A, "The effect of Na and Ca salts on MSWI bottom activation for reuse as a pozolanic admixture", Resources, Conservation and Recycling, 43, pp.403~418 (2004)
- Bertolini, L, "MSWI ashes as mineral additions in concrete", Cement and Concrete Research, 34(10), pp.1899~1906 (2004)
- Jung, C. H, "A basic study on recycling of steel slag as final cover material", Proceedings of 2008 Annual Korean Solid Wastes Engineering Society Spring, pp.381~384 (2008)
- 최두성, "현장조사를 통한 건설폐기물 재활용 실태 분석", 대한건축학회논문집 계획계, 24(4), pp.133~140 (2008), 대한건축학회
- Jun, M. H, "The generation and recycling of construction waste", Geoenvironmental Engineering, 7(3), pp.42~48 (2006)
- Kim, T. Y, "Reality and vision for waste recycling industry" (2002), Resource Recycling Publisher
- Waste Examination Methods, "Ministry of Environment", ~, pp.Official No. 2008-96 (2008)
- Galeota, D, "Structural concrete incorporation high volume of fly ash", Proceedings Fifth International Conference Milwaukee, pp.25~42 (1995)
- Ranganath, R. V, "Influence of fineness and soluble silica content of fly ashes on their strength development with respect to age", Proceedings Fifth International Conference Milwaukee, pp.354~366 (1995)
- 이우근, "소각바닥재와 슬래그의 혼합비에 따른 무기바인더의 물성평가", 한국폐기물자원순환학회지, 25(6), pp.554~559 (2008), 한국폐기물자원순환학회
- Waste Ash Brick, "Korean Standards Association", ~, pp.KS L 8520 (2007)
- Park, M. S, "Stabilization and manufacturing method of construction material for recycling of solid wastes", 박사, pp.2001
- Bhatty, J. I, "Compressive strength of municipal sludge ash mortars", ACI, Materials Journal, 86, pp.394~400 (1989)
- Tay, J. H, "Sludge ash as lightweight concrete material", Journal of Environmental Engineering, 115(1), pp.56~64 (1989)
- Michael, D. L, "Hazardous waste management", pp.641~646 (1994), McGrawHill Inc
- William, C. A, "Innovative site remediation technol ogy. Vol. 4" (1994), Springer
- Kim, I. B, "The effect of density variation on the recycling of construction wastes as cement brick", Journal of Ansung National University, 29(2), pp.171~175 (1997)
- Official unit-prices in the system for the proper treatment of abandoned wastes, "Ministry of Environment", ~, pp.Official No. 2008-15 (2008)
- A criterion for estimating cost, "Ministry of Strategy and Finance", ~, pp.Official No. 160-4 (2007)
- Transport and Maritime Affairs : Standards of basic construction cost calculation for City·Gun·Gu areas, "Ministry of Land", ~, pp.Official No. 2009-96 (2009)
- "Korea Price Research Center Association Inc., The Information on Commodity Prices", ~ (2008)