자가 산부식 프라이머의 적용시간이 상아질의 미세인장 결합강도에 미치는 영향
Influence of appication time of self-etching primers on dentinal microtensile bond strength
1
조회
0
다운로드
0
인용
0
참고문헌
초록
Abstract
This study evaluated the influence of application time of self-etching primers on microtensile bond strength (μTBS) to dentin using three self-etching primer adhesive systems. Dentin surfaces were exposed from forty-eight human molars. They were conditioned with three self-etching primers (Clearfil SE Bond [SE], Unifil Bond [UF], Tyrian SPE+One Step Plus [TY]) and different primining times (10s, 20s, 30s and 40s). Composite resins were bonded to dentin surfaces and specimens were made. μTBS were tested and statistically compared using by one-way ANOVA and Tukey's Test. The results of this study presented that priming time for 10s in SE and UF groups and for 30s and 40s in TY group was highly decreased μTBS to dentin.
참고문헌 (41)
- "Bondstrength of composite to dentin using conventional, one-step, and self-etching adhesivesystems", 29(1), pp.55~61 (2001)
- "Adhesionmechanism of self-etching adhesives", pp.131~148 (1999)
- "Influence of dentin primer application methods on dentin bond strength", 21, pp.167~172 (1996)
- "Enamel and dentin bond strengths ofsingle application bonding systems", 14, pp.361~366 (2001)
- "No-bottlevsmulti-bottledentin adhesive-a microtensile bond strength and morphological study", 17, pp.373~380 (2001)
- "Over-etching effects on micro-tensile bond strength and failure patterns for two dentin bonding systems", 30, pp.99~105 (2001)
- "Effect of caries disclosing agents on bond strengthsof total-etching and self-etching primer dentin bonding systems to resin composite", 27, pp.238~242 (2002)
- "자가 산부식 프라이머와 자가 산부식 접착제의 변연 미세누출", 27(5), pp.493~501 (2002)
- "치질에 접착된 자가 산부식 프라이머와 자가 산부식 접착제의 형태학적인 양상", 28(1), pp.23~33 (2003)
- "Microleakage of self-etching primers after thermal and flexural load cycling", 14, pp.163~169 (2001)
- "New trends in dentin", enamal adhesion, 2000, pp.13, 25~30
- "Micro-tensile bond strengths to sclerotic dentin using a self-etching and a total-etching technique", 18, pp.359~369 (2002)
- "Adhesion to enamel and dentinCurrent status andfuture challenges.", 28, pp.215~235 (2003)
- "The effect of load cycling on the nanoleakage of dentin bonding systems", 18(2), pp.111~119 (2002)
- "Resin-infiltrated dentin layer formation of new bonding systems", pp.185~194
- "Aggressiveness of contemporary self-etching systems Depth of penetration beyond dentin smear layers", 17, pp.296~308 (2001)
- "Regional bond strengths of resin human root dentin", 24, pp.435~442 (1996)
- "Regional bond strengths of self-etching", self-priming adhesive systems, 1998, pp.26, 609~616
- "Bond strength of two adhesive systems to primary and permanent enamel", 27, pp.403~409 (2002)
- "Microtensile testing of dentaladhesives", 14, pp.194~201 (1998)
- "The effect of local interfacial geometry on the measurement of the tensile bond strength to dentin", pp.889~893
- "Bonding to tooth structure:a comparison of glass-ionomer and composite-resin system", pp.227~244
- "Tensile bond strength versus surface area for dentine bonding-Evaluation of a method using limited surface areas", 37, pp.882~887 (1994)
- "Microtensile bond strengths of glass ionomer cements to dentin using four conditioners", 28(ate), pp.361~366 (2000)
- "The micro-tensile bond test: a review", 1, pp.299~309 (1999)
- "The influence of cross-sectional shape andsurface area on the microtensile bond test", 14, pp.212~222 (1998)
- "Effect of operator variability on dentin bondstrength of two-step bonding systems", 13, pp.101~104 (2000)
- "Tensile bond strengths to and SEM evaluation ofground and intact enamel surface", 27, pp.523~530 (1999)
- "Effects of different burs on dentin bond strengths of bonding systems", 26, pp.375~382 (2001)
- "Influence of self-etching primer on the resin adhesion to enamel and dentin", 14(4), pp.205~210 (2001)
- "Long-term durability of dentin bonds made with a self-etching primer in vivo", 78, pp.906~911 (1999)
- "Bond strength of self-etching primers to enamel and dentin of primer teeth", 23, pp.481~486 (2001)
- "Standardized microscopic evaluation of the bonding mechanism of NRC", Prime & Bond NT, 1999, pp.12, 77~83
- "Bond strengths of nonrinsing adhesives", 31, pp.353~358 (2000)
- "Evaluation of thermal cycling and mechanical loading on bond strength of a self-etching primer system to dentin", 18, pp.269~275 (2002)
- "Regional measurement of resin-dentin bonding as an array", 78, pp.699~705 (1999)
- "Evaluation of micro-tensile shear and tensile tests determining the bond strengths of three adhesive systems", 14, pp.394~398 (1998)
- "Effects of adhesive composition on microtensile bond strength to humam dentin", 14, pp.340~343 (2001)
- "Adhesion of testing of dentin bonding agents: a review", 11, pp.117~125 (1995)
- "Bonding mechanism and micro-tensile bond strength of a 4-MET-based self-etching adhesive", 79, pp.249~ (2000)
- "Evidence of chemical bonding at biometerial-hard tissue interfaces", 79, pp.709~714 (2000)
