본문 바로가기
KERD
논문KCI 등재

치아 순면 형태가 측색 기기를 이용한 치아 색상 측정 결과에 미치는 영향

Influence of the lavial surface irregularity on the measurement of the tooth color by spectrometer

2

조회

0

다운로드

2

인용

0

참고문헌

키워드

주제분류치의학

초록

본 연구는 치아 순면의 굴곡 정도가 측색기를 이용한 치아 측색 결과에 어떠한 향을 미치는지 확인하고자 시행하 다. 고른 치열을 가진 20 성인 11명으로부터 채득한 인상에 A2 색상의 임시 금관 제작용 레진 (Luxatemp Automix Plus, DMG, Germany)을 충전하여 치아 모형을 제작하고, 중절치, 측절치, 견치, 그리고 제1소구치의 절단부, 중앙 부, 치경부의 색상을 1 ㎜ 직경의 측정구를 가진 Specbos 2100 (JETI, Germany) spectrometer를 사용해 측정하고, 디스크 형태로 제작된 조군과의 색차를 환산하여 다음의 결과를 얻었다. 모든 치아 모형에서 L*값과 b*값은 절단부에서 치경부로 갈수록 낮아지는 경향을 보이나 a*값은 증가하는 경향을 보 다. 디스크 형태의 조군과의 색차는 모든 치아의 절단부가 가장 큰 값을 보으며, 치경부가 가장 작은 값을 보으 며, 견치가 다른 치아들에 비해 디스크 형태의 조군과 작은 색차를 보인 반면, 중절치가 가장 큰 색차를 보다 (p < 0.01). 이상의 결과는 본 실험에 적용한 optic-fiber를 통해 색을 측정하는 기기를 치아 측색에 적용하기 위해서는 먼저 일정 한 측색 조건의 표준화와 치아와 접촉하는 측정부의 치아 표면의 굴곡을 극복할 수 있는 형태의 개발이 필요함을 시사 한다.

Abstract

The most scientific and reliable method for deciding the tooth color is the instrumental measurement. However, such color measuring instrument shows the difference of the measuring value according to the diversified measuring condition. This study was conducted to evaluate what effect of the labial surface irregularity of the tooth to the result of the color measured by spectrometer. 11 models of the teeth were made by injecting the A2 shade Luxatemp Automix Plus (DMG, Germany) into the impression acquired from 11 adults. Standard disk samples (15 ㎜diameter, 7 ㎜ thickness) were made with same material. CIE L*a*b* value was measured at the incisal, central, and gingival area of the central incisor, lateral incisor, canine and first premolar using Specbos 2100 (JETI, Germany) spectrometer. Color difference was calculated between labial surface and standard samples. Among all models of the teeth, L* and b* value showed the reducing tendency as they go toward the gingival area, but a* value showed the increasing tendency. Color difference between model teeth and standard samples showed the most difference at the incisal area, but the gingival area showed the least difference. And the canine showed the least color difference from the comparison of standard sample, and the central incisor showed the highest difference (p < 0.01). Although the visually detectable difference of the measuring value showed notably depending on the type and measured area (p < 0.05), L* and a* value showed notable differences depending more on the measured areas than on the type of the teeth.

참고문헌 (24)

  1. "Color matching in dentistry Practical applications of the organization of color", pp.556~566 (1973)
  2. "Organizing color in dentistry", pp.26~40 (1987)
  3. "Assessment of appearancematch by visual observation and clinical colorimeter", pp.819~822
  4. "발거된 자연치와 5종 shade guide의 색채 계측기를 이용한 색상 비교", 22, pp.769~781 (1997)
  5. "Color discrimination and shadematching ability of third year dental student", pp.174~
  6. "A new method for matching tooth col-ors with color standard", pp.837~841
  7. "Instrumental color measure-ment of vital and extracted teeth", pp.203~208
  8. "Intrarater repeatability of shade selec-tions with two shade guides", 89, pp.50~53 (2003)
  9. "Color in dentistry" (1975)
  10. "Use of a fiber-opticcolorimeter for in vivo color measurements of 2830anterior teeth", pp.535~542
  11. "A com-parison of Chromascan and spectrophotometric colormeasurement of 100 natural teeth", pp.105~109 (1985)
  12. "Three-dimensionalcolor coordinates of natural teeth compared with threeshade guide", pp.425~431
  13. "분광색채계측기를 이용한Vita shade 광중합형 복합레진의 색상 비교", 23, pp.424~432 (1998)
  14. "디지털 카메라를 이용한 치아색상 측정", 23, pp.325~333 (1997)
  15. "The Art and Science of OperativeDentistry 3rd ed" (1995), Mosby-Year book
  16. "The color problem in dentistry" (1931)
  17. "An analysis of tooth color", pp.2093~2103 (1931)
  18. "색채의 활용", pp.215~271 (2002), 서울, 도서출판 국제
  19. "색채 조형의 기초. 제2판", pp.56~194 (1996), 서울, 미진사
  20. "Therepeatability of an intraoral dental colorimeter", 88, pp.585~590 (2002)
  21. "Influence of tab and disk design on shade matching ofdental porcelain", 88, pp.591~597 (2002)
  22. "광중합복합레진의 두께에 따른 투명도 차이가수복물의 색상에 미치는 영향", 24, pp.604~613 (1999)
  23. "Color stability of dentalcomposite resin materials for crown and bridgeveneers", pp.246~251 (1987)
  24. "A colorimetric study of coffee andtee staining of four composite resins.", pp.311~322 (1977)

관련 논문AI추천

이 간행물의 다른 논문 (7건)