A new method for ship inner shell optimization based on parametric technique
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
A new method for ship Inner Shell optimization, which is called Parametric Inner Shell Optimization Method (PISOM), is presented in this paper in order to improve both hull performance and design efficiency of transport ship. The foundation of PISOM is the parametric Inner Shell Plate (ISP) model, which is a fully-associative model driven by dimensions. A method to create parametric ISP model is proposed, including geometric primitives, geometric constraints, geometric constraint solving etc. The standard optimization procedure of ship ISP optimization based on parametric ISP model is put forward, and an efficient optimization approach for typical transport ship is developed based on this procedure. This approach takes the section area of ISP and the other dominant parameters as variables, while all the design requirements such as propeller immersion, fore bottom wave slap, bridge visibility, longitudinal strength etc, are made constraints. The optimization objective is maximum volume of cargo oil tanker/cargo hold, and the genetic algorithm is used to solve this optimization model. This method is applied to the optimization of a product oil tanker and a bulk carrier, and it is proved to be effective, highly efficient, and engineering practical.
Abstract
A new method for ship Inner Shell optimization, which is called Parametric Inner Shell Optimization Method (PISOM), is presented in this paper in order to improve both hull performance and design efficiency of transport ship. The foundation of PISOM is the parametric Inner Shell Plate (ISP) model, which is a fully-associative model driven by dimensions. A method to create parametric ISP model is proposed, including geometric primitives, geometric constraints, geometric constraint solving etc. The standard optimization procedure of ship ISP optimization based on parametric ISP model is put forward, and an efficient optimization approach for typical transport ship is developed based on this procedure. This approach takes the section area of ISP and the other dominant parameters as variables, while all the design requirements such as propeller immersion, fore bottom wave slap, bridge visibility, longitudinal strength etc, are made constraints. The optimization objective is maximum volume of cargo oil tanker/cargo hold, and the genetic algorithm is used to solve this optimization model. This method is applied to the optimization of a product oil tanker and a bulk carrier, and it is proved to be effective, highly efficient, and engineering practical.
참고문헌 (16)
- Bhansali, S., "A principled approach towards symbolic geometric constraint Satisfaction", Journal of artificial Intelligence Research, 4, pp.419~443 (1996)
- Chen, J., "Optimal ballast water exchange sequence design using symmetrical multi tank strategy", Journal of Marine Science and Technology, 15(3), pp.280~293 (2010)
- Chen, J., "Optimization of ship’s subdivision arrangement for offshore sequential ballast water exchange using a non-dominated sorting genetic algorithm", Ocean Engineering, 37(11-12), pp.978~988 (2010)
- Fudos, I., "A graph-constructive approach to solving systems of geometric constraint", ACM Transactions on Graphics, 16(2), pp.179~216 (1997)
- George, S., "Sensitivity analysis of the probabilistic damage stability regulations for RoPax vessels", Journal of Marine Science and Technology, 13(2), pp.164~177 (2008)
- International Association of Classification Societies Ltd(IACS), "Common structural rules for double hull oil tankers(JTP), Section 8. 1" (2006), IMO publisher
- International Association of Classification Societies Ltd(IACS), "Common structural rules for bulk carriers(JBP), Chapter 5, Section 1" (2006), IMO publisher
- 78), "International Convention for the Prevention of Pollution from Ships(MARPOL 73", pp.2002, International Maritime Organization(IMO)
- 3-6, "International convention for the safety of life at sea(SOLAS)II-1", pp.2004, International Maritime Organization(IMO)
- Ivanov, L. D., "An approximate analytical method for calculation of the still water bending moments, shear forces and the ship's trim in the early design stages", Transactions of the Royal Institution of Naval Architects Part A : International Journal of Maritime Engineering, 149(3), pp.1~39 (2007)
- Light, R., "Modification of geometric models through variational geometry", Computer Aided Design, 14(4), pp.209~213 (1982)
- Ölçer, A.İ., "An integrated multi-objective optimization and fuzzy multi-attributive group decision-making technique for subdivision arrangement of Ro-Ro vessels", Applied Soft Computing, 6, pp.221~243 (2006)
- Yu, Y. Y., "A new method for platform design based on parametric technology", Ocean Engineering, 37(5-6), pp.473~482 (2010)
- Yan-Yun YU, "Optimization of ship inner shell to improve the safety of seagoing transport ship", International Journal of Naval Architecture and Ocean Engineering, 5(3), pp.454~467 (2013), 대한조선학회
- Yu, Y. Y., "New method for ship finite element method preprocessing based on 3D parametric technique", Journal of Marine Science & Technology, 3(14), pp.398~407 (2009)
- Verroust, A., "Rule-oriented method for parameterized computer-aided design", Computeraided Design, 24(10), pp.531~540 (1992)