Weight reduction and strengthening of marine hatch covers by using composite materials
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
The application of composites as an alternative material for marine steel hatch covers is the subject of this study. Two separate approaches are considered; weight reduction approach and strengthening approach. For both approaches Finite Element Analysis (FEA) was performed using ANSYS software. Critical design parameters of the composite hatch cover and FEA are discussed in details. Regarding the weight reduction approach; steel hatch covers of a bulk carrier were replaced by composite covers and a weight reduction of 44.32% was achieved leading to many benefits including fuel saving, Deadweight Increment and lower center of gravity of the vessel. For the strengthening approach; the foremost hatch cover was strengthened to withstand 150% of the load required by IACS for safer navigation while no change in weight was made between the steel and composite covers. Results show that both approaches are feasible and advantageous.
Abstract
The application of composites as an alternative material for marine steel hatch covers is the subject of this study. Two separate approaches are considered; weight reduction approach and strengthening approach. For both approaches Finite Element Analysis (FEA) was performed using ANSYS software. Critical design parameters of the composite hatch cover and FEA are discussed in details. Regarding the weight reduction approach; steel hatch covers of a bulk carrier were replaced by composite covers and a weight reduction of 44.32% was achieved leading to many benefits including fuel saving, Deadweight Increment and lower center of gravity of the vessel. For the strengthening approach; the foremost hatch cover was strengthened to withstand 150% of the load required by IACS for safer navigation while no change in weight was made between the steel and composite covers. Results show that both approaches are feasible and advantageous.
참고문헌 (27)
- "ANSYS Composite PrepPost User's Guide", ANSYS, Inc, 154~155 (2015)
- Blake, J. I. R., "The application of reliability methods in the design of stiffened FRP composite panels for marine vessels", Ships Offshore Struct, 4(3), pp.287~297 (2009), Taylor and Francis Group
- Regional Cooperation, Infrastructure and Trade Costs in Asia, "Brooks, D.", Tokyo Asian Development Bank Institute, ~, pp.ADBI Working Paper 123 (2008)
- Campbell, F. C., "Structural Composite Materials", pp.14~ (2010), ASM International
- "Breakthrough for FRP Composites to Replace Steel Hatches on Ships" (2015)[URL]
- Evangelista, Joe, "The History of the American Bureau of Shipping 150th Anniversary", pp.11~12 (2013), ABS
- Greene, Eric, "Marine Composites" (1999), Eric Greene and Associates
- Haffner, Sascha M., "Cost Modeling and Design for Manufacturing Guidelines for Advanced Composite Fabrication", PhD, pp.2002
- Hansen, Ragnar E, "GRP Hatch Covers for Large Seagoing Ships-Design Challenges and Solutions", Hansen Engineering and Consulting, E-lass Meeting (2008)
- Hinton, M. J., "Failure Criteria in Fiber Reinforced Polymer Composites: the World-wide Failure Exercise" (2004), Elsevier
- Horsmon Jr., "Composites for large ships, the national shipbuilding research program", Ship Production Symposium, Sponsored by the Hampton Roads Section SNAME, pp.17~ (1993), IMO
- Jones, Robert M., "Mechanics of Composite Materials", pp.2~ (1999), Taylor and Francis group
- Kunal, K., "Hatch cover analysis of capesize bulk carriers and suggestions for alternate materials", Proceedings of MARTEC 2010, the International Conference on Marine Technology (2010), BUET
- Lamb, Thomas, "Ship Design and Construction" (2003), The Society of Naval Architects and Marine Engineers (SNAME)
- Li, Jun, "Application of Composite Materials to Large Marine Hatch Cover, vols. 560-561", pp.809~815 (2012), Advanced Materials Research
- Lloyd's Register, "Bulk Carriers-an Update", Technical Planning and Development Department, Lloyd’s Register, 27~28 (1998)
- Mouritz, A. P., "Review of advanced composite structures for naval ships and submarines", J. Compos. Struct, 53(1), pp.21~42 (2001)
- Puck, A., "Failure analysis of FRP laminates by means of physically based phenomenological models", Comp. Sci. Technol, 62, pp.1633~1662 (2002)
- Reddy, J. N., "Mechanics of Laminated Composite Plates and Shells", pp.83~84 (2004), CRC Press LLC
- Feasibility Study of Glass Reinforced Plastic Cargo Ship, "Scott, Robert J.", Ship Structure Committee, ~, pp.Ship Structure Committee. SSC-224 (1971)
- Soden, P. D., "Lamina Properties, Lay-up Configurations and Loading Conditions for a Range of Fiber-reinforced Composite Laminates", Composites Science and Technology, 58, pp.1011~1022 (1998), Elsevier
- LASS-lightweight Construction Applications at Sea, "Hertzberg, Tommy", SP Technical Research Institute of Sweden, 11~, pp.SP Report 2009:13 (2009)
- Tang Youhong Li Jun, "Light hatch cover for large or mediship, Chinese Patent CN202574567U", ~ (2012)
- Tsai, S. W., "A general theory of strength for anisotropic materials", J. Compos. Mater, 5, pp.58~80 (1971)
- 엄태섭, "Optimal dimension design of a hatch cover for lightening a bulk carrier", International Journal of Naval Architecture and Ocean Engineering, 7(2), pp.270~287 (2015), 대한조선학회
- Vinson, Jack R, "The Behavior of Structures Composed of Composite Materials", pp.361~371 (2004), Kluwer Academic Publishers
- Yao, Tetsuya, "Collapse strength of hatch cover of bulk carrier subjected to lateral pressure load", Mar. Struct, 16, pp.687~688 (2003), Elsevier