A study on accumulated damage of steel wedges with dead-rise 10 due to slamming loads
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This paper presents the results of experimental investigation on the elasticeplastic response of steel unstiffened wedges with dead-rise 10 subjected to repeated impulsive pressure loadings. Repeated drop tests were performed with both wedge thickness and drop height varied. The pressure and histories were recorded during the tests and the permanent deflections were measured after every drop. Using the recorded test result, the effects of flexibility of wedges and repetition have been investigated. From the pressure history obtained from the tests the characteristics of the impulses were identified. Numerical simulations of the tests were made using the measured pressure history and the permanent deflection predictions were compared with those of the experiments.
Abstract
This paper presents the results of experimental investigation on the elasticeplastic response of steel unstiffened wedges with dead-rise 10 subjected to repeated impulsive pressure loadings. Repeated drop tests were performed with both wedge thickness and drop height varied. The pressure and histories were recorded during the tests and the permanent deflections were measured after every drop. Using the recorded test result, the effects of flexibility of wedges and repetition have been investigated. From the pressure history obtained from the tests the characteristics of the impulses were identified. Numerical simulations of the tests were made using the measured pressure history and the permanent deflection predictions were compared with those of the experiments.
참고문헌 (23)
- ABAQUS, "User's Manual. Version 6.10" (2010)
- Buchner, B., "Wave Impacts Due to Steep Fronted Waves. Rogue Waves", Rogue Waves 2004 (2004)
- Caridis, P., "Dynamic elastic", viscoplastic response of hull plating subjected to hydrodynamic wave impact, 1997, pp.41(2), 130~146
- Cho, S.R., "Dynamic material properties of marine steels under impact loadings", Proceedings of the 2015 World Congress on Advances in Structural Engineering and Mechanics, ASEM15 (2015)
- Chuang, S.L., "Experiments on flat-bottom slamming", J. Ship Res., pp.10~17 (1966)
- Investigation of Impact of Rigid and Elastic Bodies with Water, Report 3248, "Chuang, S.L.", Department of the Navy, Naval Ship Research and Development Center, ~ (1970)
- Strain Hardening and Strain Rate Effects in the Loading of Cantilever Beams, "Cowper, G.", Brown University, ~, pp.Applied Mathematics Report No. 28 (1957)
- Sea Tests of the USCGC Unimak, Part 3 - Pressures, Strains and Deflections of the Bottom Plating Incident to Slamming. DTMB report 978. NS 731-037, "Greenspon, J.E.", ~ (1956)
- Henchie, T.F., "The response of circular plates to repeated uniform blast loads: an experimental and numerical study", Int. J. Impact Eng., 74, pp.36~45 (2014)[DOI]
- Final Report on the Capsizing on 28 September 1994 in the Baltic Sea of the Ro-ro Passenger Vessel MV Estonia, "Joint Accident Investigation Commission (JAIC)", ~ (1997)
- Sea Tests of the USCGC Unimak, Part 1 - General Outline of Tests and Test Results. DTMB Report 976, "Jasper, N.H.", ~ (1956)
- A Lower Bound to the Static Collapse Pressure of a Fully Clamped Rectangular Plate, "Jones, N.", MIT, ~, pp.Department of Ocean Engineering Report No. 71-20 (1971)
- Jones, N., "Slamming damage", J. Ship Res., 17(2), pp.80~86 (1973)
- KS, "KS-B-0801, Test Pieces for Tensile Test for Metallic Materials", Korean Agency for Technology and Standard, ~ (2007)
- Luo, H., "Numerical simulation of hydroelastic responses of flat stiffened panels under slamming loads", Proceedings of the ASME 29th International Conference on Ocean, Offshore and Arctic Engineering, OMAE2010 (2010)
- Report on the Investigation of the Structural Failure of MSC Napoli, English Channel on 18 January 2007, "Marine Accident Investigation branch (MAIB)", MAIB, ~, pp.MAIB Report No. 9 (2008), 2008
- Minamoto, H., "Analysis of repeated impacts on a steel rod with visco-plastic material behavio", Eur J Mech A, 2011, pp.30, 336~344
- Pegg, N.G., "Finite Element Prediction of Measured Bow Flare Plate Stresses Under Dynamic Wave Loading", Transaction of the Royal Institution of naval Architects, 130, pp.135~143 (1988)
- Register, Lloyd's, "Rule and Regulations for the Classification of Naval Ships", 1~ (2017)
- Sinha, S., "Development of simplified structural design formulation for slamming loads", Proceedings of the ASME 27th International Conference on Ocean, Offshore and Arctic Engineering, OMAE2008-57740 (2008)
- Villavicencio, R., "Numerical modeling of the boundary conditions on beams struck transversely by a mass", Int. J. Impact Eng., 38, pp.384~396 (2011)[DOI]
- Impact of a Vee-type Seaplane on Water with Reference to Elasticity. National Advisory Committee for Aeronautics Technical Memorandums. No. 810, "Weinig, F.", ~ (1936)
- Yamamoto, Y., "A Structural damage analysis of a fast ship due to bow flare slamming", Int. Shipbuild. Prog., 32, pp.124~136 (1985)[DOI]