컴퓨터 시각과 입자 추적 방법을 이용한 복합레진의 선형중합수축 측정의 새로운 방법
A NEW METHOD TO MEASURE THE LINEAR POLYMERIZATION SHRINKAGE OF COMPOSITES USING A PARTICLE TRACKING METHOD WITH COMPUTER VISION
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
수복용 복합레진이 도입된 이후 많은 물성의 향상이 이루어졌으나 중합수축은 아직 해결되지 않은 주요 단점으로 남아있다. 중합수축이 적은 복합레진을 만들기 위한 많은 노력이 이루어져 최근에 silorane 기질의 저수축 복합레진이 개발되었고, 정밀하게 중합수축을 측정하기 위한 여러 방법들이 시도되었다. 본 연구에서는 컴퓨터 시각(computer vision)을 이용하여 시편에 직접 접촉하지 않으며 광중합 복합레진의 선형중합수축을측정할 수 있는 입자 추적 시스템을 개발하였고 이를 이용하여 silorane (P90) 및 methacrylate (Z250과 Z350) 기질의 광중합 복합레진의 중합수축 거동을 측정하여 다음과 같은 결론을 얻었다. 1. 복합레진의 선형중합수축은 0.33-1.41% 였으며 silorane기질의 복합레진인 P90이 가장 낮았고 Z250, Z350의 순으로증가하였다. 2. 본 장비는 선형중합수축을 시편의 형태에 민감하지 않고 복잡한 과정없이 실시간으로 측정할 수 있었다.
Abstract
Since the introduction of restorative dental composites, their physical properties have been significantly improved. However, polymerization shrinkage is still a major drawback. Many efforts have been made to develop a low shrinking composite, and silorane-based composites have recently been introduced into the market. In addition, many different methods have been developed to measure the polymerization shrinkage. In this study, we developed a new method to measure the linear polymerization shrinkage of composites without direct contact to a specimen using a particle tracking method with computer vision. The shrinkage kinetics of a commercial silorane-based composite (P90) and two conventional methacrylate-based composites (Z250 and Z350) were investigated and compared. The results were as follows:1. The linear shrinkage of composites was 0.33-1.41%. Shrinkage was lowest for the silorane-based (P90) composite, and highest for the flowable Z350 composite. 2. The new instrument was able to measure the true linear shrinkage of composites in real time without sensitivity to the specimen preparation and geometry. [J Kor Acad Cons Dent 35(3):180-187, 2010]
참고문헌 (24)
- B.A.M. Venhoven, "Polymerization contraction and conversion of light-curing BisGMA-based methacryate resins", Biomaterials, 14, pp.871~875 (1993)
- Ferracane JL, "Developing a more complete understanding of stresses produced in dental composites during polymerization", Dent Mater, 21, pp.36~42 (2005)
- Ferracane JL, "Buonocore Lecture. Placing dental composites- a stressful experience", Oper Dent, 33, pp.247~257 (2008)
- J.H. Lai, "Measuring polymerization shrinkage of photo activated restorative materials by a water filled dilatometer", Dent Mater, 9, pp.139~143 (1993)
- R.W. Penn, "A recording dilatometer for measuring polymerization shrinkage", Dent Mater, 2, pp.78~79 (1986)
- A.J.de Gee, "True linear polymerization shrinkage of unfilled resins and composites determined with a linometer", Dent Mater, 9, pp.11~14 (1993)
- R.L. Sakaguchi, "Strain gauge method for measuring polymerization contraction of composite restoratives", J Dent, 19, pp.312~316 (1991)
- V. Fano, "Polymerization shrinkage of microfilled composites determined by laser beam scanning", Biomaterials, 18, pp.467~470 (1997)
- R. Labella, "Polymerization shrinkage and elasticity of flowable composites and filled adhesives", Dent Mater, 15, pp.128~137 (1999)
- Watts DC, "Determination of polymerization shrinkage kinetics in visible light-cured materials: methods development", Dent Mater, 7, pp.281~287 (1991)
- 이미라, "복합레진 수복시 와동의 크기 및 수복 방법이 교두 굴곡에 미치는 영향", 대한치과보존학회지, 29(6), pp.532~540 (2004), 대한치과보존학회
- Park JK, "How should composite be layered to reduce shrinkage stress: Incremental or bulk filling?", Dent Mater, 24, pp.1501~1505 (2008)
- Feilzer AJ, "Setting stress in composite resin in relation to configuration of the restoration", J Dent Res, 66, pp.1636~1639 (1987)
- Lee IB, "The effect of consistency, specimen geometry and adhesion on the axial polymerization shrinkage measurement of light cured composites", Dent Mater, 22, pp.1071~1079 (2006)
- Lee SH, "Influence of instrument compliance and specimen thickness on the polymerization shrinkage stress measurement of lightcured composites", Dent Mater, 23, pp.1093~1100 (2007)
- Lee IB, "A new method to measure the polymerization shrinkage kinetics of light cured composites", J of Oral Rehabil, 32, pp.304~314 (2005)
- In-Bog Lee, "A new method - real time measurement of the initial dynamic volumetric shrinkage of composite resins during polymerization", J of Kor Acad of Cons Dent, 26, pp.134~140 (2001)
- Ellakwa A, "The effect of resin matrix composition on the polymerization shrinkage and rheological properties of experimental dental composites", Dent Mater, 23, pp.1229~1235 (2007)
- Weinmann W, "Siloranes in dental composites", Dent Mater, 21, pp.68~74 (2005)
- Papadogiannis D, "Setting characteristics and cavity adaptation of lowshrinking resin composites", Dent Mater, 25, pp.1509~1516 (2009)
- Calheiros FC, "Polymerization contraction stress of low-shrinkage composites and its correlation with microleakage in class V restorations", J Dent, 32, pp.407~412 (2004)
- Kleverlaan CJ, "Polymerization shrinkage and contraction stress of dental resin composites", Dent Mater, 21, pp.1150~1157 (2005)
- 서덕규, "측정장치의 compliance 유무가 복합레진의 중합수축응력의 측정에 미치는 영향", 대한치과보존학회지, 34(2), pp.145~153 (2009), 대한치과보존학회
- 권영철, "Silorane 복합레진의 중합수축의 동력학", 대한치과보존학회지, 35(1), pp.51~58 (2010), 대한치과보존학회