Numerical study of the run-up of a solitary wave after propagation over a saw-tooth-shaped submerged breakwater
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
A numerical model is established to investigate the run-up of a solitary wave after propagating over a triangular saw-tooth-shaped submerged breakwater. A rectangular-shaped submerged breakwater is simulated for comparison. Several factors, including the submerged depth, the lagoon length and the beach slope, are selected as independent variables. The free surface motions and velocity fields of the solitary wave interacting with the submerged breakwater are discussed. The results show that the submerged depth and lagoon length play significant roles in reducing the run-up. The influence of the beach slope is not significant. At the same submerged depth, the triangular saw-tooth-shaped submerged breakwater has only a slightly better effect than the rectangular-shaped submerged breakwater on the run-up reduction. However, a calmer reflected wave profile could be obtained with the rougher surface of the saw-tooth-shaped submerged breakwater. The study conclusions are expected to be useful for the conceptual design of saw-tooth-shaped submerged breakwaters.
Abstract
A numerical model is established to investigate the run-up of a solitary wave after propagating over a triangular saw-tooth-shaped submerged breakwater. A rectangular-shaped submerged breakwater is simulated for comparison. Several factors, including the submerged depth, the lagoon length and the beach slope, are selected as independent variables. The free surface motions and velocity fields of the solitary wave interacting with the submerged breakwater are discussed. The results show that the submerged depth and lagoon length play significant roles in reducing the run-up. The influence of the beach slope is not significant. At the same submerged depth, the triangular saw-tooth-shaped submerged breakwater has only a slightly better effect than the rectangular-shaped submerged breakwater on the run-up reduction. However, a calmer reflected wave profile could be obtained with the rougher surface of the saw-tooth-shaped submerged breakwater. The study conclusions are expected to be useful for the conceptual design of saw-tooth-shaped submerged breakwaters.
참고문헌 (34)
- Carevic, D., "Wave parameters after smooth submerged breakwater", Coast. Eng, 79, pp.32~41 (2013)
- Chan, I., "On the runup of long waves on a plane beach", J. Geophys. Res.: Oceans, 117(C8) (2012)
- Chang, K., "Vortex generation and evolution in water waves propagating over a submerged rectangular obstacle: Part I. solitary waves", Coast. Eng, 44(1), pp.13~36 (2001)
- Chen, L., "Numerical and experimental investigation of nonlinear wave-current propagation over a submerged breakwater", J. Eng. Mech, 143(9), pp.04017061~ (2017)
- Christou, M., "The interaction of surface water waves with submerged breakwaters", Coast. Eng, 55(12), pp.945~958 (2008)
- Feng, X., "Assessment of tsunami hazard for coastal areas of Shandong Province", China. Appl. Ocean Res, 62, pp.37~48 (2017)
- Goseberg, N., "Laboratory-scale generation of tsunami and long waves", Coast. Eng, 79, pp.57~74 (2013)
- Hirt, C. W., "Volume of fluid(VOF)method for the dynamics of free boundaries", J. Comput. Phys, 39(1), pp.201~225 (1981)
- Hsiao, S., "Tsunami-like solitary waves impinging and overtopping an impermeable seawall : experiment and RANS modeling", Coast. Eng, 57(1), pp.1~18 (2010)
- Irtem, E., "Experimental investigation on the effects of submerged breakwaters on tsunami run-up height", J. Coast. Res, 64(s), pp.516~520 (2011)
- Ji, Q., "Wave transformation over submerged breakwaters by the constrained interpolation profile method", Ocean Eng, 136, pp.294~303 (2017)
- Jiang, X., "Wave load on submerged quarter-circular and semicircular breakwaters under irregular waves", Coast. Eng, 121, pp.265~277 (2017)
- Kasem, T. H. M. A., "Multiphase modeling of wave propagation over submerged obstacles using Weno and level set methods", Coast Eng. J, 52(3), pp.235~259 (2010)
- Li, M., "Generation of regular and focused waves by using an internal wave maker in a CIP-based model", Ocean Eng, 167, pp.334~347 (2018)
- Madsen, P. A., "On the solitary wave paradigm for tsunamis", J. Geophys. Res.: Oceans, 113(C12) (2008)
- Menter, F. R., "Two-equation Eddy-viscosity turbulence models for engineering applications", AIAA J, 32(8), pp.1598~1605 (1994)
- Qu, K., "Numerical investigation of tsunami-like wave hydrodynamic characteristics and its comparison with solitary wave", Appl. Ocean Res, 63, pp.36~48 (2017)
- Qu, K., "Numerical investigation of hydrodynamic load on bridge deck under joint action of solitary wave and current", Appl. Ocean Res, 75, pp.100~116 (2018)
- Rambabu, A. C., "Numerical prediction of performance of submerged breakwaters", Ocean Eng, 32(10), pp.1235~1246 (2005)
- Schimmels, S., "Tsunami generation in a large scale experimental facility", Coast. Eng, 110, pp.32~41 (2016)
- Shing, T. K. C., "Experimental Study on the Effect of Submerged Breakwater Configuration on Long Wave Run-Up Reduction", pp.2014
- Silva, R., "Reflection and transmission of tsunami waves by coastal structures", Appl. Ocean Res, 22, pp.215~223 (2000)
- Sriram, V., "Tsunami evolution and run-up in a large scale experimental facility", Coast. Eng, 111, pp.1~12 (2016)
- Synolakis, C. E., "The runup of solitary waves", J. Fluid Mech, 185, pp.523~545 (1987)
- Wang, D., "Numerical modeling of the interactions between waves and a Jarlan-type caisson breakwater using OpenFOAM", Ocean Eng, 188, pp.106230~ (2019)
- Wang, D., "A numerical piston-type wave-maker toolbox for the open-source library OpenFOAM", J. Hydrodyn, 31, pp.800~ (2019)
- Wang, J., "Numerical study on interaction of a solitary wave with the submerged obstacle", Ocean Eng, 158, pp.1~14 (2018)
- Wang, D., "Numerical simulation of solitary wave transformation over reef profile based on InterDyMFoam", The Ocean Eng, 36(2), pp.47~55 (2018)
- Williams, I. A., "Numerical simulation of tsunami-scale wave boundary layers", Coast. Eng, 110, pp.17~31 (2016)
- Wu, Y. T., "Propagation of solitary waves over a bottom-mounted barrier", Coast. Eng, 62, pp.31~47 (2012)
- Yao, Y., "Boussinesq modeling of solitary wave run-up reduction by emergent vegetation on a sloping beach", J. Hydro-Environ. Res, 19, pp.78~87 (2018)
- Young, D. M., "Wave reflection by submerged vertical and semicircular breakwaters", Ocean Eng, 38(10), pp.1269~1276 (2011)
- Zhang, N., "Estimation of the transmission coefficients of wave height and period after smooth submerged breakwater using a non-hydrostatic wave model", Ocean Eng, 122, pp.202~214 (2016)
- Zhuang, F., "A viscous rotational model for wave overtopping over marine structure", Proceedings of the 25th International Conference on Coastal Engineering (1996), ASCE
