Approximate natural vibration analysis of rectangular plates with openings using assumed mode method
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Natural vibration analysis of plates with openings of different shape represents an important issue in naval architecture and ocean engineering applications. In this paper, a procedure for vibration analysis of plates with openings and arbitrary edge constraints is presented. It is based on the assumed mode method, where natural frequencies and modes are determined by solving an eigenvalue problem of a multi-degree-of-freedom system matrix equation derived by using Lagrange's equations of motion. The presented solution represents an extension of a procedure for natural vibration analysis of rectangular plates without openings, which has been recently presented in the literature. The effect of an opening is taken into account in an intuitive way, i.e. by subtracting its energy from the total plate energy without opening. Illustrative numerical examples include dynamic analysis of rectangular plates with rectangular,elliptic, circular as well as oval openings with various plate thicknesses and different combinations of boundary conditions. The results are compared with those obtained by the finite element method (FEM) as well as those available in the relevant literature, and very good agreement is achieved.
Abstract
Natural vibration analysis of plates with openings of different shape represents an important issue in naval architecture and ocean engineering applications. In this paper, a procedure for vibration analysis of plates with openings and arbitrary edge constraints is presented. It is based on the assumed mode method, where natural frequencies and modes are determined by solving an eigenvalue problem of a multi-degree-of-freedom system matrix equation derived by using Lagrange's equations of motion. The presented solution represents an extension of a procedure for natural vibration analysis of rectangular plates without openings, which has been recently presented in the literature. The effect of an opening is taken into account in an intuitive way, i.e. by subtracting its energy from the total plate energy without opening. Illustrative numerical examples include dynamic analysis of rectangular plates with rectangular,elliptic, circular as well as oval openings with various plate thicknesses and different combinations of boundary conditions. The results are compared with those obtained by the finite element method (FEM) as well as those available in the relevant literature, and very good agreement is achieved.
참고문헌 (21)
- Aksu, G., "Determination of dynamic characteristics of rectangular plates with cut-outs using a finite difference formulation", Journal of Sound and Vibration, 44, pp.147~158 (1976)
- Ali, R., "Prediction of natural frequencies of rectangular plates with circular cutouts", Computers and Structures, 12(6), pp.819~823 (1980)
- A structural analysis program for static and dynamic response of linear systems, "Bathe, K. J.", University of California, ~, pp.Report No. EERC 73-11 (1973)
- Chung, J. H., "Vibration analysis of orthotropic Mindlin plates with edges elastically restrained against rotation", Journal of Sound and Vibration, 163(1), pp.151~163 (1993)
- Grossi, R. O., "Free vibration of rectangular plates with circular openings", Ocean Engineering, 24(1), pp.19~24 (1997)
- Gutierrez, R. H., "Higher frequencies of transverse vibration of rectangular plates elastically restrained against rotation at the edges with a central free hole", Journal of Sound and Vibration, 117(1), pp.202~206 (1987)
- Hegarty, R.F., "Elasto-dynamic analysis of rectangular plates with circular holes", International Journal of Solids and Structures, 11(7-8), pp.895~906 (1975)
- Huang, M., "Free vibration analysis of rectangular plates with variable thickness", Journal of Sound and Vibration, 216(3), pp.379~397 (1998)
- Huang, M., "Free vibration analysis of rectangular plates with variously-shaped holes", Journal of Sound and Vibration, 226(4), pp.769~786 (1999)
- Kookhyun Kim, "Free vibration analysis of rectangular plate with arbitrary edge constraints using characteristic orthogonal polynomials in assumed mode method", International Journal of Naval Architecture and Ocean Engineering, 4(3), pp.267~280 (2012), 대한조선학회
- Kwak, M.K., "Free vibration analysis of rectangular plate with a hole by means of independent coordinate coupling method", Journal of Sound and Vibration, 306(1-2), pp.12~30 (2007)
- Laura, P. A. A., "Free vibration of rectangular plates elastically restrained against rotation with circular or square free openings", Ocean Engineering, 14(4), pp.285~293 (1987)
- Vibration of plates, "Leissa, A. W.", Scientific and Technical Information Division, National Aeronautics and Space Administration, ~, pp.NASA Report No. SP-160 (1969)
- Mindlin, R. D., "Flexural vibrations of rectangular plates", Journal of Applied Mechanics, 23, pp.430~436 (1956)
- Monahan, L. J., "Natural frequencies and mode shapes of plates with interior cutouts", The Shock and Vibration Bulletin, 41(3), pp.37~49 (1970)
- MSC, "MD Nastran 2010 Dynamic analysis user's guide", MSC Software, ~ (2010)
- Paramasivam, P., "Free vibration of square plates with square openings", Journal of Sound and Vibration, 30(2), pp.173~178 (1973)
- Reddy, J. N., "Large amplitude flexural vibration of layered composite plates with cutouts", Journal of Sound and Vibration, 83(1), pp.1~10 (1982)
- Senjanović, I., "An advanced theory of moderately thick plate vibrations", Journal of Sound and Vibration, 332(7), pp.1868~1880 (2013)
- Szilard, R., "Theories and applications of plate analysis" (2004), John Wiley & Sons
- Xing, Y., "Characteristic equations and closed-form solution for free vibrations of rectangular Mindlin plates", Acta Mechanica Solida Sinica, 22(2), pp.125~136 (2009)