Effect of dentin biomodifiers on the immediate and long-term bond strengths of a simplified etch and rinse adhesive to dentin
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Objectives: This in vitro study evaluated the effect of dentin biomodifiers on the immediate and long-term bond strengths of a simplified etch and rinse adhesive to dentin. Materials and Methods: Flat coronal dentin surfaces were prepared in 120 extracted human molars. Teeth were randomly divided into 5 groups (n = 24) according to 5 different surface pre-treatments: No pre-treatment (control); 1M carbodiimide (EDC); 0.1% epigallocatechin-3-gallate (EGCG); 2% minocycline (MI); 10% sodium ascorbate (SA). After surface pre-treatment, adhesive (Adper Single Bond 2 [SB], 3M ESPE) was applied. Composite was applied into transparent plastic tubes (2.5 mm in diameter), which was placed over the bonded dentin surface. From each group, 10 samples were subjected to shear bond strength (SBS) evaluation at 24 hours (immediate) and remaining 10 samples were tested after 6 months (delayed). Additionally, 4 samples per group were subjected to scanning electron microscopic analysis for observation of resin-dentin interface. The data were statistically analysed with Shaperio‑Wilk W test, 2-way analysis of variance (ANOVA), and post hoc Tukey's test. Results: At 24 hours, SBS of all surface pre-treatment groups were comparable with the control group, with significant differences found between EDC and SA groups only (p = 0.009). After 6 months storage, EDC, EGCG, and MI pre-treatments preserved the resin-dentin bond strength with no significant fall. Conclusions: Dentin pre-treatment with all the dentin biomodifiers except SA resulted in significant preservation of resin-dentin bond over 6 months storage period, without negatively affecting the immediate bond strength of the etch and rinse adhesive tested.
Abstract
Objectives: This in vitro study evaluated the effect of dentin biomodifiers on the immediate and long-term bond strengths of a simplified etch and rinse adhesive to dentin. Materials and Methods: Flat coronal dentin surfaces were prepared in 120 extracted human molars. Teeth were randomly divided into 5 groups (n = 24) according to 5 different surface pre-treatments: No pre-treatment (control); 1M carbodiimide (EDC); 0.1% epigallocatechin-3-gallate (EGCG); 2% minocycline (MI); 10% sodium ascorbate (SA). After surface pre-treatment, adhesive (Adper Single Bond 2 [SB], 3M ESPE) was applied. Composite was applied into transparent plastic tubes (2.5 mm in diameter), which was placed over the bonded dentin surface. From each group, 10 samples were subjected to shear bond strength (SBS) evaluation at 24 hours (immediate) and remaining 10 samples were tested after 6 months (delayed). Additionally, 4 samples per group were subjected to scanning electron microscopic analysis for observation of resin-dentin interface. The data were statistically analysed with Shaperio‑Wilk W test, 2-way analysis of variance (ANOVA), and post hoc Tukey's test. Results: At 24 hours, SBS of all surface pre-treatment groups were comparable with the control group, with significant differences found between EDC and SA groups only (p = 0.009). After 6 months storage, EDC, EGCG, and MI pre-treatments preserved the resin-dentin bond strength with no significant fall. Conclusions: Dentin pre-treatment with all the dentin biomodifiers except SA resulted in significant preservation of resin-dentin bond over 6 months storage period, without negatively affecting the immediate bond strength of the etch and rinse adhesive tested.
참고문헌 (35)
- Hashimoto M, "In vivo degradation of resin-dentin bonds in humans over 1 to 3 years", J Dent Res, 79, pp.1385~1391 (2000)
- Yang B, "Effect of structural change of collagen fibrils on the durability of dentin bonding", Biomaterials, 26, pp.5021~5031 (2005)
- Pashley DH, "Collagen degradation by host-derived enzymes during aging", J Dent Res, 83, pp.216~221 (2004)
- Pashley DH, "State of the art etch-and-rinse adhesives", Dent Mater, 27, pp.1~16 (2011)
- Bedran-Russo AK, "Dentin biomodification: strategies, renewable resources and clinical applications", Dent Mater, 30, pp.62~76 (2014)
- Monteiro TM, "Influence of natural and synthetic metalloproteinase inhibitors on bonding durability of an etch-and-rinse adhesive to dentin", Int J Adhes Adhes, 47, pp.83~88 (2013)
- Castellan CS, "Effect of dentin biomodification using naturally derived collagen cross-linkers: one-year bond strength study", Int J Dent, 2013, pp.918010~ (2013)
- Erhardt MC, "Adjunctive use of an anti-oxidant agent to improve resistance of hybrid layers to degradation", J Dent, 39, pp.80~87 (2011)
- Khamverdi Z, "The effect of epigallocatechin gallate on the dentin bond durability of two self-etch adhesives", J Dent (Shiraz), 16, pp.68~74 (2015)
- Hiraishi N, "In vitro evaluation of plant-derived agents to preserve dentin collagen", Dent Mater, 29, pp.1048~1054 (2013)
- Sorsa T, "Matrix metalloproteinases: contribution to pathogenesis, diagnosis and treatment of periodontal inflammation", Ann Med, 38, pp.306~321 (2006)
- Hass V, "Degradation of dentin-bonded interfaces treated with collagen cross-linking agents in a cariogenic oral environment: an in situ study", J Dent, 49, pp.60~67 (2016)
- Roomi MW, "Inhibition of matrix metalloproteinase-2 secretion and invasion by human ovarian cancer cell line SK-OV-3 with lysine, proline, arginine, ascorbic acid and green tea extract", J Obstet Gynaecol Res, 32, pp.148~154 (2006)
- Gotti VB, "Effect of antioxidants on the dentin interface bond stability of adhesives exposed to hydrolytic degradation", J Adhes Dent, 17, pp.35~44 (2015)
- Loghman Rezaei-Soufi, "Effect of Epigallocatechin Gallate on shear bond strength of composite resin to bleached enamel: an in vitro study", Restorative Dentistry and Endodontics, 38(4), pp.241~247 (2013), 대한치과보존학회[DOI]
- Meharry MR, "Comparison of enamel and dentin shear bond strengths of current dental bonding adhesives from three bond generations", Oper Dent, 38, pp.E237~E245 (2013)
- Scheffel DL, "Increased durability of resin-dentin bonds following cross-linking treatment", Oper Dent, 40, pp.533~539 (2015)
- Mobarak EH, "Effect of chlorhexidine pretreatment on bond strength durability of caries-affected dentin over 2-year aging in artificial saliva and under simulated intrapulpal pressure", Oper Dent, 36, pp.649~660 (2011)
- Montagner AF, "MMP inhibitors on dentin stability: a systematic review and meta-analysis", J Dent Res, 93, pp.733~743 (2014)
- Tezvergil-Mutluay A, "The requirement of zinc and calcium ions for functional MMP activity in demineralized dentin matrices", Dent Mater, 26, pp.1059~1067 (2010)
- Scheffel DL, "Collagen degradation and MMP activity in dentin biomodified by cross-linkers", Dent Mater, 30(Supplement 1), pp.e158~ (2014)
- Scheffel DL, "Stabilization of dentin matrix after cross-linking treatments, in vitro", Dent Mater, 30, pp.227~233 (2014)
- Seseogullari-Dirihan R, "Effect of pretreatment pH on dentin protease inactivation by carbodiimide", Dent Mater, 28(Supplement 1), pp.e64~ (2012)
- Angeloni V, "EDC stabilize the adhesive interface over time", Dent Mater, 29(Supplement 1), pp.e65~e66 (2013)
- Cadenaro M, "Effect of carboidiimide on thermal denaturation temperature of dentin collagen", Dent Mater, 32, pp.492~498 (2016)
- Tezvergil-Mutluay A, "Carbodiimide cross-linking inactivates soluble and matrix-bound MMPs, in vitro", J Dent Res, 91, pp.192~196 (2012)
- Scheffel DL, "Inactivation of matrix-bound matrix metalloproteinases by cross-linking agents in acid-etched dentin", Oper Dent, 39, pp.152~158 (2014)
- Perumal S, "Collagen fibril architecture, domain organization, and triple-helical conformation govern its proteolysis", Proc Natl Acad Sci U S A, 105, pp.2824~2829 (2008)
- da Fonseca BM, "New trends in dentin bonding: treatment with Chlorhexidine, Hyaluronic acid, vitamin C and green tea", Braz Dent Sci, 16, pp.56~62 (2013)
- Santiago SL, "Effect of the flavonoid epigallocatechin-3-gallate on resin-dentin bond strength", J Adhes Dent, 15, pp.535~540 (2013)
- Zheng P, "Effect of different matrix metalloproteinase inhibitors on microtensile bond strength of an etch-and-rinse and a self-etching adhesive to dentin", Oper Dent, 40, pp.80~86 (2015)
- Carvalho C, "Effect of green tea extract on bonding durability of an etch-and-rinse adhesive system to caries-affected dentin", J Appl Oral Sci, 24, pp.211~217 (2016)
- Stanislawczuk R, "Effect of tetracycline on the bond performance of etch-and-rinse adhesives to dentin", Braz Oral Res, 25, pp.459~465 (2011)
- Li H, "Morphological effects of MMPs inhibitors on the dentin bonding", Int J Clin Exp Med, 8, pp.10793~10803 (2015)
- Pinnel SR, "Induction of collagen synthesis by ascorbic acid. A possible mechanism", Arch Dermatol, 123, pp.1684~1686 (1987)