Virtual maneuvering test in CFD media in presence of free surface
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Maneuvering oblique towing test is simulated in a Computational Fluid Dynamic (CFD) environment to obtain the linear and nonlinear velocity dependent damping coefficients for a DTMB 5512 model ship. The simulations are carried out in freely accessible OpenFOAM library with three different solvers, rasInterFoam, LTSInterFoam and interDyMFoam, and two turbulence models, k-ε and SST k-ω in presence of free surface. Turning and zig-zag maneuvers are simulated for the DTMB 5512 model ship using the calculated damping coefficients with CFD. The comparison of simulated results with the available experimental shows a very good agreement among them.
Abstract
Maneuvering oblique towing test is simulated in a Computational Fluid Dynamic (CFD) environment to obtain the linear and nonlinear velocity dependent damping coefficients for a DTMB 5512 model ship. The simulations are carried out in freely accessible OpenFOAM library with three different solvers, rasInterFoam, LTSInterFoam and interDyMFoam, and two turbulence models, k-ε and SST k-ω in presence of free surface. Turning and zig-zag maneuvers are simulated for the DTMB 5512 model ship using the calculated damping coefficients with CFD. The comparison of simulated results with the available experimental shows a very good agreement among them.
참고문헌 (28)
- Abkowitz, M. A., "Stability and motion control of ocean vehicles" (1969), MIT
- Beck, R., "Modern seakeeping computations for ships", Twenty Third Symposium on Naval Hydrodynamics, Val de Reuil, France, pp.1~45 (2000)
- Dantas, J. L. D., "Numerical analysis of control surface effects on AUV manoeuvrability", Journal of Applied Ocean Research, 42, pp.168~181 (2013)
- Ferziger, H. J., "Computational methods for fluid dynamics. 3rd edition" (2002), Springer
- Gentaz, L., "Three-dimensional free-surface viscous flow around a ship in forced motion", Proceedings of Seventh International Conference Numerical Ship Hydrodynamic, Nantes, France, pp.1~12 (1999)
- Hirt, C. W., "Volume of fluid(VOF)method for the dynamics of free boundaries", Journal of Computational Physics, 39, pp.201~225 (1981)
- Resolution standards for ship maneuverability, "IMO(International Maritime Organization)", IMO, ~, pp.MSC.137 (76) (2002)
- Explanatory notes to the standards for ship maneuverability, "IMO(International Maritime Organization)", IMO, ~, pp.SC (2002), Circ (1053)
- Hrvoje Jasak, "OpenFOAM : Open source CFD in research and industry", International Journal of Naval Architecture and Ocean Engineering, 1(2), pp.89~94 (2009), 대한조선학회
- Lewis, E. V., "Principles of naval architecture" (1988), The Society of Naval Architects and Marine Engineers
- Menter, F. R., "Turbulence, Heat and Mass Transfer 4" (2003), Begell House, Inc
- Nazir, Z., "A CFD based investigation of the unsteady hydrodynamic coefficients of 3-D fins in viscous flow", Journal of Marine Science and Application, 9(3), pp.250~255 (2010)
- Nomoto, K., "Analysis of Kempf’s standard maneuver test and proposed steering quality indices", Proceedings of 1st Symposium on Ship Maneuverability, Department Of The Navy, Maryland, United State of America, pp.275~304 (1960)
- Towing tank experiments of resistance, sinkage and trim, boundary layer, wake, and free surface flow around a naval combatant insean 2340 model, "Olivieri, A.", Iowa institute of hydrolic research, The University of Iowa, ~, pp.IIHR Technical Report No. 42 (2001)
- 박선호, "Investigation on the wall function implementation for the prediction of ship resistance", International Journal of Naval Architecture and Ocean Engineering, 5(1), pp.33~46 (2013), 대한조선학회
- Ray, A., "Evaluation of linear and nonlinear hydrodynamic coefficients of underwater vehicles using CFD", Proceedings of the ASME 28th International Conference on Ocean, Offshore and Arctic Engineering, Honolulu, Hawaii, pp.257~265 (2009)
- Roache, P. J., "Quantification of uncertainty in computational fluid dynamics", Annual Review of Fluid Mechanics, 29, pp.123~160 (1997)
- Rusche, H., "Computational fluid synamics of sispersed two-phase flows at high phase fractions", 박사, Department of Mechanical Engineering, pp.2002
- Sarkar, T., "A study of autonomous underwater vehicle hull forms using computational fluid dynamics", International Journal for Numerical Methods in Fluids, 25(11), pp.1301~1313 (1997)
- Schmode, D., "Simulating ship motions and loads using OpenFOAM", 12th Numerical Towing Tank Symposium, Cortona, Italy, pp.148~152 (2009)
- 서정화, "Flexible CFD meshing strategy for prediction of ship resistance and propulsion performance", International Journal of Naval Architecture and Ocean Engineering, 2(3), pp.139~145 (2010), 대한조선학회
- Simonsen, C. D., "Maneuvering predictions in the early design phase using CFD generated PMM data", 29th Symposium on Naval Hydrodynamics, Gothenburg, Sweden (2012)
- Tyagi, A., "Calculation of transverse hydrodynamic coefficients using computational fluid dynamic approach", Journal of Ocean Engineering, 33, pp.798~809 (2006)
- Ubbink, O., "Numerical prediction of two fluid systems with sharp interfaces", 박사, pp.1997
- Wilson, R., "Unsteady RANS CFD method for naval combatants in waves", Proceedings of 22nd Symposium Naval Hydrodynamic, Washington, D C, pp.532~549 (1998)
- Yoon, H., "Phase-averaged stereo-PIV flow field and Force", moment, 박사, pp.The University of Iowa[DOI]
- Yoshimura, Y., "Mathematical model for maneuvering ship motion(MMG Model)", Workshop on Mathematical Models for Operations involving Ship-Ship Interaction, Tokyo, pp.1~6 (2005)
- Zhang, H., "Using CFD software to calculate hydrodynamic coefficients", Journal of Marine Science and Application, 9, pp.149~155 (2010)
