An optimal design of wind turbine and ship structure based on neuro-response surface method
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The geometry of engineering systems affects their performances. For this reason, the shape of engineering systems needs to be optimized in the initial design stage. However, engineering system design problems consist of multi-objective optimization and the performance analysis using commercial code or numerical analysis is generally time-consuming. To solve these problems, many engineers perform the optimization using the approximation model (response surface). The Response Surface Method (RSM) is generally used to predict the system performance in engineering research field, but RSM presents some prediction errors for highly nonlinear systems. The major objective of this research is to establish an optimal design method for multi-objective problems and confirm its applicability. The proposed process is composed of three parts: definition of geometry, generation of response surface, and optimization process. To reduce the time for performance analysis and minimize the prediction errors, the approximation model is generated using the Backpropagation Artificial Neural Network (BPANN) which is considered as Neuro-Response Surface Method (NRSM). The optimization is done for the generated response surface by non-dominated sorting genetic algorithm-II (NSGA-II). Through case studies of marine system and ship structure (substructure of floating offshore wind turbine considering hydrodynamics performances and bulk carrier bottom stiffened panels considering structure performance), we have confirmed the applicability of the proposed method for multi-objective side constraint optimization problems.
Abstract
The geometry of engineering systems affects their performances. For this reason, the shape of engineering systems needs to be optimized in the initial design stage. However, engineering system design problems consist of multi-objective optimization and the performance analysis using commercial code or numerical analysis is generally time-consuming. To solve these problems, many engineers perform the optimization using the approximation model (response surface). The Response Surface Method (RSM) is generally used to predict the system performance in engineering research field, but RSM presents some prediction errors for highly nonlinear systems. The major objective of this research is to establish an optimal design method for multi-objective problems and confirm its applicability. The proposed process is composed of three parts: definition of geometry, generation of response surface, and optimization process. To reduce the time for performance analysis and minimize the prediction errors, the approximation model is generated using the Backpropagation Artificial Neural Network (BPANN) which is considered as Neuro-Response Surface Method (NRSM). The optimization is done for the generated response surface by non-dominated sorting genetic algorithm-II (NSGA-II). Through case studies of marine system and ship structure (substructure of floating offshore wind turbine considering hydrodynamics performances and bulk carrier bottom stiffened panels considering structure performance), we have confirmed the applicability of the proposed method for multi-objective side constraint optimization problems.
참고문헌 (17)
- Bucher, C. G., "A fast and efficient response surface approach for structural reliability problem", Structural Safety, 7(1), pp.57~66 (1990)
- 한형석, "Psycho-acoustic evaluation of the indoor noise in cabins of a naval vessel using a back-propagation neural network algorithm", International Journal of Naval Architecture and Ocean Engineering, 4(4), pp.374~385 (2012), 대한조선학회
- Hong, K. J., "A study on the construction of response surfaces for design optimization", Trans. Korea Soc. Mech. Eng, A, 24(6), pp.1408~1418 (2000)
- Kahraman, F., "The use of response surface methodology for prediction and analysis of surface roughness of aisi 400 steel", Materials and technology, 43(5), pp.267~270 (2009)
- Kalyanmoy, D., "A fast and elitist multiobjective genetic algorithm : NSGA-II", IEEE Transaction on evolutionary computation, 6(2), pp.182~197 (2002)
- Kim, S. J., "A benchmark study on ultimate strength analysis methods of ship stiffened panel", 석사, pp.2012
- Lee, J. C., "Development of framework for NRSM based optimal shape design", Proceedings of KIIS Spring Conference 2013, 23(1), pp.3~4 (2013)
- 이재철, "신경반응표면을 이용한 공학 구조물 설계 프레임워크구축 및 검증에 관한 연구", 한국지능시스템학회 논문지, 24(1), pp.46~51 (2014), 한국지능시스템학회
- Lee, J. C., "A study on prediction method for added resistance in waves using the Genetic Programming", Proceedings of the Annual Autumn Conference, Changwon, pp.482~490 (2014)
- Sukomal Mandal, "Damage level prediction of non-reshaped berm breakwater using ANN, SVM and ANFIS models", International Journal of Naval Architecture and Ocean Engineering, 4(2), pp.112~122 (2012), 대한조선학회[DOI]
- Mayers, R. H., "Response surface methodology – process and product optimization using Designed experiments" (1995), John Wiley & Sons
- Pail, J. K., "Ultimate limit state design of steel-plated structures" (2003), John Wiley&Sons
- Robert, H. N., "Theory of the back-propagation neural network", International Joint Conference, 1, pp.593~605 (1989)
- Ross, P. J., "Taguchi techniques for quality engineering. 2nd" (1996), McGraw-Hill Professional Publishing
- 신성철, "뉴로퍼지시스템에 의한 반류분포 추정에 관한 연구", 한국지능시스템학회 논문지, 17(2), pp.154~159 (2007), 한국지능시스템학회
- Yang, H., "Dynamic reliability based design optimisation of the tripod sub-structure of offshore wind turbines", Renewable Energy, 78, pp.16~25 (2015)
- Yu, L., "A response surface approach to fatigue reliability of ship structures", Ships and Offshore Structures, 4(3), pp.253~259 (2009)