Improvement of prediction methods of power increase in regular head waves using calm-water and resistance tests in waves
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This paper applies load variation method to predict speed-power-rpm relationship along with propulsive performances in regular head waves, and to derive overload factors (ITTC, 2018). ‘Calm-water tests’ and ‘resistance test in waves’ are used. The modified overload factors are proposed taking non-linearity into consideration, and applied to the direct powering, and resistance and thrust identity method. These indirect methods are evaluated through comparing the speed-power-rpm relationships with those obtained from the resistance and self-propulsion tests in calm water and in waves. The objective ship is KVLCC2. The load variation method predicts well the speed-power-rpm relationship and propulsion performances in waves. The direct powering method with modified overload factors also predicts well. The resistance and thrust identity method with modified overload factor predicts with a little difference. The direct powering method with overload factors predicts with a relatively larger difference.
Abstract
This paper applies load variation method to predict speed-power-rpm relationship along with propulsive performances in regular head waves, and to derive overload factors (ITTC, 2018). ‘Calm-water tests’ and ‘resistance test in waves’ are used. The modified overload factors are proposed taking non-linearity into consideration, and applied to the direct powering, and resistance and thrust identity method. These indirect methods are evaluated through comparing the speed-power-rpm relationships with those obtained from the resistance and self-propulsion tests in calm water and in waves. The objective ship is KVLCC2. The load variation method predicts well the speed-power-rpm relationship and propulsion performances in waves. The direct powering method with modified overload factors also predicts well. The resistance and thrust identity method with modified overload factor predicts with a little difference. The direct powering method with overload factors predicts with a relatively larger difference.
참고문헌 (21)
- Berlekom, W. B. Van, "Wind forces on modern ship forms-effects on performance", Transactions of the Royal Institution of Naval Architects, 97, pp.123~134 (1981)
- Chuang, Z., "Prediction of speed loss of a ship in waves", Proceedings of the 2nd International Symposium on Marine Propulsors (SMP), pp.8~ (2011), M. Abdel-Maksoud
- Hwang, S., "Experimental study on the effect of bow hull forms to added resistance in regular head waves", Proceedings of the 12th International Symposium on Practical Design of Ships and Other Floating Structures, pp.39~44 (2013)
- ITTC, "ITTC-recommended Procedures and Guidelines. Testing and Extrapolation Methods Resistance: Resistance Test 7.5-02-02-01", ~ (2002)
- ITTC, "ITTC-recommended Procedures and Guidelines. Performance, Propulsion 1978 ITTC Performance Prediction Method 7.5-02-03-01.4", ~ (2008)
- ITTC, "ITTC-recommended Procedures and Guidelines. Performance, Speed and Power Trials, Part 2 Analysis of Speed", Power Trial Data7.5-02-04-01.2, 2012
- ITTC, "ITTC-recommended Procedures and Guidelines. Prediction of Power Increase in Irregular Waves from Model Test 7.5-02-07-02.2", ~ (2014)
- ITTC, "ITTC-recommended Procedures and Guidelines. Analysis of Speed", Power Trial Data ITTC 7.5-04-01-01.2, 2018
- 김유철, "Analysis of added resistance and seakeeping responses in head sea conditions for low-speed full ships using URANS approach", International Journal of Naval Architecture and Ocean Engineering, 9(6), pp.641~654 (2017), 대한조선학회
- Kwon, Y. J., "Speed Loss Due to Added Resistance in Wind and Waves", The Naval Architect, pp.14~16 (2008)
- Cheol-Min Lee, "Comparative study of prediction methods of power increase and propulsive performances in regular head short waves of KVLCC2 using CFD", International Journal of Naval Architecture and Ocean Engineering, 11(2), pp.883~898 (2019), 대한조선학회[DOI]
- Lee, J., "Experimental investigation on the added resistance of modified KVLCC2 hull forms with different bow shapes", Proc. Inst. Mech. Eng. Part M J. Eng. Marit. Environ, 231(2), pp.395~410 (2017)
- Shukui Liu, "Time-domain hybrid method for simulating large amplitude motions of ships advancing in waves", International Journal of Naval Architecture and Ocean Engineering, 3(1), pp.72~79 (2011), 대한조선학회
- McCarthy, J. H., "The Performance of a Submerged Propeller in Regular Waves" (1961), David Taylor Model Basin
- "MEPC 66", 21 Annex 5, 2014 Guidelines on the Method of Calculation of the Attained Energy Efficiency Design Index (EEDI) for New Ships, 2014
- Nakamura, S., "Propulsive performance of a container ship in waves", J. Kansai Soc. Nav. Archit. Jpn, 158, pp.24~47 (1975)
- Sadat-Hosseini, H., "CFD verification and validation of added resistance and motions of KVLCC2 with fixed and free surge in short and long head waves", Ocean Eng, 59, pp.240~273 (2013)
- Seo, J. H., "Power increase and propulsive characteristics in regular head waves of KVLCC2 using model tests", Ocean Eng, 216, pp.1~12 (2020)[DOI]
- Van, S. H., "Experimental investigation of the flow characteristics around practical hull forms", Proceedings of the 3rd Osaka Colloquium on Advanced CFD Applications to Ship Flow and Hull Form Design Osaka, pp.25~27 (1998)
- Yasukawa, H., "Wave height effect on added resistance of full hull ships in waves", J. Jpn. Soc. Nav. Archit. Ocean Eng, 23, pp.45~54 (2016)
- Yu, J. W., "Effect of ship motions on added resistance in regular head waves of KVLCC2", Ocean Eng, 146, pp.375~387 (2017)