3-D CT를 이용한 악교정수술후의 하악 과두 위치와 하악폭경 및 하악각의 평가
3-D CT EVALUATION OF CONDYLE HEAD POSITION, MANDIBULAR WIDTH, AND MANDIBULAR ANGLE AFTER MANDIBULAR SETBACK SURGERY
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
The purpose of this study is to evaluate the change in condylar position, width, and angle before and after orthognathic surgery using 3-dimensional computed tomograph. Pre and posterative 3-D CT was taken on 38 patients and through axial, frontal, sagittal measurements and by 3-dimensional reconstruction, the changes in condylar postion, mandibular width and angle were analyzed and others such as the difference in gender, operation and fixation method, setback length and in relation with temporomandibular disorders were done together too. The results were as follows: The inward rotation of condyle in axial condylar angle, the forward movement of right condyle in sagittal anterior-posterior distance, the superior movement of both condyles in sagittal superior-inferior distance, the decrease in gonial angle, the increase in mandibular width, the decrease in distance between the axial coronoid process distance and the increase in the frontal intercondylar distance were statistically significant. There were no statistically significant changes in gender difference, however in the difference in operation method, change in the gonial angle was observed and there was more change in bilateral sagittal split osteotomy group compared to two-jaw surgery group. In the difference in fixation method, the decrease in axial coronoid process distance and the change in sagittal anterior-posterior distance were statistically significant. In the difference in setback, the increase in setback didn't relate directly with the increased change in condyle position. In the relation with temporomandibular disorder, changes in left axial condylar angle and axial coronoid process distance were statistically significant. Changes in condylar position could be observed after the orthognathic surgery but it doesn't seem to have much of a clinical importance. The orthognathic surgery is effective in decreasing the mandibular angle, and it is not related with the temporomandibular disorder.
Abstract
The purpose of this study is to evaluate the change in condylar position, width, and angle before and after orthognathic surgery using 3-dimensional computed tomograph. Pre and posterative 3-D CT was taken on 38 patients and through axial, frontal, sagittal measurements and by 3-dimensional reconstruction, the changes in condylar postion, mandibular width and angle were analyzed and others such as the difference in gender, operation and fixation method, setback length and in relation with temporomandibular disorders were done together too. The results were as follows: The inward rotation of condyle in axial condylar angle, the forward movement of right condyle in sagittal anterior-posterior distance, the superior movement of both condyles in sagittal superior-inferior distance, the decrease in gonial angle, the increase in mandibular width, the decrease in distance between the axial coronoid process distance and the increase in the frontal intercondylar distance were statistically significant. There were no statistically significant changes in gender difference, however in the difference in operation method, change in the gonial angle was observed and there was more change in bilateral sagittal split osteotomy group compared to two-jaw surgery group. In the difference in fixation method, the decrease in axial coronoid process distance and the change in sagittal anterior-posterior distance were statistically significant. In the difference in setback, the increase in setback didn't relate directly with the increased change in condyle position. In the relation with temporomandibular disorder, changes in left axial condylar angle and axial coronoid process distance were statistically significant. Changes in condylar position could be observed after the orthognathic surgery but it doesn't seem to have much of a clinical importance. The orthognathic surgery is effective in decreasing the mandibular angle, and it is not related with the temporomandibular disorder.
참고문헌 (33)
- Edward E, "A method to passively align the sagittal ramus osteotomy segments", J Oral Maxillofac Surg, 65, pp.2125~2130 (2007)
- Ueki K, "Horizontal changes in the condylar head after sagittal split ramus osteotomy with bent plate fixation", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 106, pp.656~661 (2008)
- Choi KY, "Evaluation of condylar position using computed tomograph following bilateral sagittal split ramus osteotomy", J Kor Maxillofac Plast Resconst Surg, 18, pp.570~593 (1996)
- Baek SH, "Is there any difference in the condylar position and angulation after asymmetric mandibular setback?", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 101, pp.155~163 (2006)
- Yoo JY, "The postoperative condylar position related to temporomandibular discomfort in sagittal split ramus osteotomy", J Kor Maxillofac Plast Reconst Surg, 19, pp.130~134 (1997)
- Ueki K, "Condylar and temporomandibular joint disc postitions after mandibular osteotomy for prognathism", J Oral Maxillofac Surg, 60, pp.1424~1432 (2002)
- Jonas PB, "Transverse displacement of the proximal segment after bilateral sagittal osteotomy", J Oral Maxillofac Surg, 60, pp.395~403 (2002)
- 김인호, "하악전돌증 환자에서 악교정수술 후 하악각 및 하악폭경의 변화", 대한구강악안면외과학회지, 32(2), pp.129~137 (2006), 대한구강악안면외과학회
- Park HD, "of facial soft-tissue changes after mandibular sagittal split ramus osteotomy", J Kor Maxillofac Plast Reconst Surg, 18, pp.87~108 (1996)
- Tyndall DA, "Positional changes of the mandibular condyle assesed by three-dimensional computed tomography", J Oral Maxillofacial Surg, 50, pp.1164~1172 (1992)
- Song JC, "evaluation of the accuracy and reliability of 3-D CT for measurement of maxillofacial region", J Kor Maxillofac Plast Reconst Surg, 22, pp.500~512 (2000)
- Kang YK, "A cephalometric and panoramic analysis of the changes of the condylar position after orthognathic surgery", J Kor Maxillofac Plast Reconst Surg, 22, pp.411~419 (2000)
- Spitzer WJ, "Computerized tomography examination for the detection of positional changes in the temporomandibular joint after ramus osteotomies with screw fixation", J Maxillofacial Surg, 12, pp.139~142 (1984)
- Christof UJ, "Stability after bilateral sagittal split osteotomy setback surgery with rigid internal fixation: a systemic review", J Oral Maxillofac Surg, 66, pp.1634~1643 (2008)
- Ueki K, "Skeletal stability afer mandibular setback surgery : bicortical fixation using a 2.0-mm locking plate system versus monocortical fixation using a nonlocking plate system", J Oral Maxillofac Surg, 66, pp.900~904 (2008)
- Ueki K, "Change in condylar long axis and skeletal stability following sagittal split ramus osteotomy and intraoral vertical ramus osteotomy for mandibular prognathia", J Oral Maxillofacial Surg, 63, pp.1494~1499 (2005)
- Lee W, "Three-dimensional evaluation of positional change of the condyle after mandibular setback by means of bilateral sagittal split ramus osteotomy", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 94, pp.305~309 (2002)
- 이성근, "하악골 비대칭 환자의 양측성 하악골 시상분할 골절단술 후 하악과두의 위치 변화", 대한구강악안면외과학회지, 30(5), pp.359~367 (2004), 대한구강악안면외과학회
- 최우혁, "하악전돌증 환자에 있어 양측 하악상행지 시상골절단술이술후 과두위치 변화에 미치는 영향에 대한 연구", 대한악안면성형재건외과학회지, 25(6), pp.525~532 (2003), 대한악안면성형재건외과학회
- Reitzik M, "Skeletal and dental changes after surgical correction of mandibular prognathism", J Oral Surg, 38, pp.109~116 (1980)
- Kwon YH, "Clinical analysis of gonial angle change after orthognathic surgery in patients with the mandibular prognathism", J Kor Maxillofac Plast Reconst Surg, 22, pp.206~216 (2000)
- Kang SH, "A clinical study of changes in gonial angle between pre and post orthognathic surgery in mandibular prognathic patients", J Kor Oral Maxillofac Surg, 24, pp.193~197 (1998)
- 김영삼, "안면비대칭 환자의 악교정술 후 안면비대칭의 개선에 따른 악관절장애 증상의 변화", 대한구강악안면외과학회지, 33(5), pp.518~523 (2007), 대한구강악안면외과학회
- Mark W, "Bicortical screw stabilization of sagittal split osteotomies", J Oral Maxillofac Surg, 61, pp.1477~1484 (2003)
- Chung IH, "Postoperative stability after sagittal split ramus osteotomies for a mandibular setback with monocortical plate fixation or bicortical screw fixation", J Oral Maxillofac Surg, 66, pp.446~452 (2008)
- Shetty V, "Experimental analysis of functional stability of sagittal split ramus osteotomies secured by miniplates and position screws", J Oral Maxillofac Surg, 54, pp.1317~1324 (1996)
- Murphy MT, "An in vitro comparison of the mechanical characteristics of three sagittal ramus osteotomy fixation techniques", J Oral Maxillofac Surg, 55, pp.489~494 (1997)
- Tharanon W, "Comparison between the rigidity of bicortical screws and a miniplate for fixation of a mandibular setback after a simulated bilateral sagittal split osteotomy", J Oral Maxillofac Surg, 56, pp.1055~1058 (1998)
- Hackney FL, "Condylar displacement in temporomandibular joint dysfuncion following bilateral sagittal split osteotomy and rigid fixation", J Oral Maxillofac Surg, 46, pp.223~227 (1989)
- Lee HK, "Evaluation of condylar displacement using computer tomography after the surgical correction of mandibular prognathism", J Kor Maxillofac Plast Reconst Surg, 20, pp.191~200 (1998)
- Lee DH, "악관절장애환자의 하악과두 크기에 관한 연구", J Kor Oral Maxillofac Surg, 27, pp.417~422 (2001)
- Onizawa K, "Alteration of temporomandibular joint symptoms after orthognatic surgery", J Oral Maxillofac Surg, 53, pp.117~121 (1995)
- Timmis DP, "Masticatory dysfunction with rigid and non-rigid osteosynthesis of sagittal split osteotomies", Oral Surg, 62, pp.119~123 (1986)