Clinical evaluation of ridge augmentation using autogenous tooth bone graft material: case series study
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Objectives: Interest in bone graft material has increased with regard to restoration in cases of bone defect around the implant. Autogenous tooth bone graft material was developed and commercialized in 2008. In this study, we evaluated the results of vertical and horizontal ridge augmentation with autogenous tooth bone graft material. Materials and Methods: This study targeted patients who had vertical or horizontal ridge augmentation using AutoBT from March 2009 to April 2010. We evaluated the age and gender of the subject patients, implant stability, adjunctive surgery, additional bone graft material and barrier membrane, post-operative complication, implant survival rate, and crestal bone loss. Results: We performed vertical and horizontal ridge augmentation using powder- or block-type autogenous tooth bone graft material, and implant placement was performed on nine patients (male: 7, female: 2). The average age of patients was 49.88±12.98 years, and the post-operative follow-up period was 35±5.31 months. Post-operative complications included wound dehiscence (one case), hematoma (one case), and implant osseointegration failure (one case; survival rate: 96%); however, there were no complications related to bone graft material, such as infection. Average marginal bone loss after one-year loading was 0.12±0.19 mm. Therefore, excellent clinical results can be said to have been obtained. Conclusion: Excellent clinical results can be said to have been obtained with vertical and horizontal ridge augmentation using autogenous tooth bone graft material.
Abstract
Objectives: Interest in bone graft material has increased with regard to restoration in cases of bone defect around the implant. Autogenous tooth bone graft material was developed and commercialized in 2008. In this study, we evaluated the results of vertical and horizontal ridge augmentation with autogenous tooth bone graft material. Materials and Methods: This study targeted patients who had vertical or horizontal ridge augmentation using AutoBT from March 2009 to April 2010. We evaluated the age and gender of the subject patients, implant stability, adjunctive surgery, additional bone graft material and barrier membrane, post-operative complication, implant survival rate, and crestal bone loss. Results: We performed vertical and horizontal ridge augmentation using powder- or block-type autogenous tooth bone graft material, and implant placement was performed on nine patients (male: 7, female: 2). The average age of patients was 49.88±12.98 years, and the post-operative follow-up period was 35±5.31 months. Post-operative complications included wound dehiscence (one case), hematoma (one case), and implant osseointegration failure (one case; survival rate: 96%); however, there were no complications related to bone graft material, such as infection. Average marginal bone loss after one-year loading was 0.12±0.19 mm. Therefore, excellent clinical results can be said to have been obtained. Conclusion: Excellent clinical results can be said to have been obtained with vertical and horizontal ridge augmentation using autogenous tooth bone graft material.
참고문헌 (25)
- Simion M, "Vertical ridge augmentation using a membrane technique associated with osseointegrated implants", Int J Periodontics Restorative Dent, 14, pp.496~511 (1994)
- Tinti C, "Vertical ridge augmentation: what is the limit?", Int J Periodontics Restorative Dent, 16, pp.220~229 (1996)
- Simion M, "Long-term evaluation of osseointegrated implants inserted at the time or after vertical ridge augmentation. A retrospective study on 123 implants with 1-5 year follow-up", Clin Oral Implants Res, 12, pp.35~45 (2001)
- Chiapasco M, "Alveolar distraction osteogenesis vs. vertical guided bone regeneration for the correction of vertically deficient edentulous ridges: a 1-3-year prospective study on humans", Clin Oral Implants Res, 15, pp.82~95 (2004)
- Kim YK, "Development of bone graft material using autogenous teeth", Dent Success, 29, pp.586~593 (2009)
- Kim YK, "Development of a novel bone grafting material using autogenous teeth", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 109, pp.496~503 (2010)
- Hämmerle CH, "Ridge augmentation by applying bioresorbable membranes and deproteinized bovine bone mineral: a report of twelve consecutive cases", Clin Oral Implants Res, 19, pp.19~25 (2008)
- Urban IA, "Horizontal ridge augmentation with a resorbable membrane and particulated autogenous bone with or without anorganic bovine bone-derived mineral: a prospective case series in 22 patients", Int J Oral Maxillofac Implants, 26, pp.404~414 (2011)
- Li J, "Minimally invasive ridge augmentation using xenogenous bone blocks in an atrophied posterior mandible: a clinical and histological study", Implant Dent, 22, pp.112~116 (2013)
- Jong-Yub Kim, "Bone Healing Capacity of Demineralized Dentin Matrix Materials in a Mini-pig Cranium Defect", 대한치의학회 영문학회지, 5(1), pp.21~28 (2012), 대한치의학회
- 정혜린, "미니피그에서 자가치아뼈 이식의 골형성 효과에 대한 연구", 대한구강악안면외과학회지, 37(5), pp.375~379 (2011), 대한구강악안면외과학회
- Kim YK, "Analysis of the inorganic component of autogenous tooth bone graft material", J Nanosci Nanotechnol, 11, pp.7442~7445 (2011)
- 김영균, "다양한 이종치아 골이식재를 이용한 두개골 결손부 수복: 동물 연구", Maxillofacial Plastic Reconstructive Surgery, 34(5), pp.299~310 (2012), 대한악안면성형재건외과학회
- Masaru Murata, "Biochemical and histo-morphometrical analyses of bone and cartilage induced by human decalcified dentin matrix and BMP-2", 구강생물학연구, 35(1), pp.9~14 (2011), 구강생물학연구소
- Murata M, "Acid-insoluble human dentin as carrier material for recombinant human BMP-2", J Biomed Mater Res A, 100, pp.571~577 (2012)
- Murata M, "Human dentin as novel biomaterial for bone regeneration, In Biomaterials-physics and chemistry", pp.127~140 (2011), InTech
- 마득현, "가족치아 이식재를 이용한 골결손부의 골유도재생술: 증례보고", 구강생물학연구, 36(1), pp.69~73 (2012), 구강생물학연구소
- 김영균, "자가치아골이식재를 이용한 발치창 보존 및 재건술", Maxillofacial Plastic Reconstructive Surgery, 33(3), pp.264~269 (2011), 대한악안면성형재건외과학회
- 김영균, "자가치아골이식재를 이용한 골유도재생술: 증례보고", 대한구강악안면외과학회지, 37(2), pp.142~147 (2011), 대한구강악안면외과학회
- 김영균, "자가치아골이식재를 이용한 치조능 수직 및 수평증대술: 증례보고", Maxillofacial Plastic Reconstructive Surgery, 33(2), pp.166~170 (2011), 대한악안면성형재건외과학회
- 이정훈, "자가치아를 이용한 골이식재의 임상적 유용성: 일차 보고", Maxillofacial Plastic Reconstructive Surgery, 33(2), pp.144~148 (2011), 대한악안면성형재건외과학회
- Jeong KI, "Clinical study of graft materials using autogenous teeth in maxillary sinus augmentation", Implant Dent, 20, pp.471~475 (2011)
- 정경인, "자가치아뼈이식재를 이용한 상악동증강술: 일차 보고", Maxillofacial Plastic Reconstructive Surgery, 33(3), pp.256~263 (2011), 대한악안면성형재건외과학회
- 이지영, "자가치아 골이식술의 후향적 관찰연구", 구강생물학연구, 36(1), pp.39~43 (2012), 구강생물학연구소
- 김영균, "Bone graft material using teeth", 대한구강악안면외과학회지, 38(3), pp.134~138 (2012), 대한구강악안면외과학회