본문 바로가기
KERD
논문KCI 등재

Antimicrobial surfaces for craniofacial implants: state of the art

1

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류치의학

초록

In an attempt to regain function and aesthetics in the craniofacial region, different biomaterials, including titanium, hydroxyapatite, biodegradable polymers and composites, have been widely used as a result of the loss of craniofacial bone. Although these materials presented favorable success rates, osseointegration and antibacterial properties are often hard to achieve. Although bone-implant interactions are highly dependent on the implant’s surface characteristics, infections following traumatic craniofacial injuries are common. As such, poor osseointegration and infections are two of the many causes of implant failure. Further, as increasingly complex dental repairs are attempted, the likelihood of infection in these implants has also been on the rise. For these reasons, the treatment of craniofacial bone defects and dental repairs for long-term success remains a challenge. Various approaches to reduce the rate of infection and improve osseointegration have been investigated. Furthermore, recent and planned tissue engineering developments are aimed at improving the implants’ physical and biological properties by improving their surfaces in order to develop craniofacial bone substitutes that will restore, maintain and improve tissue function. In this review, the commonly used biomaterials for craniofacial bone restoration and dental repair, as well as surface modification techniques, antibacterial surfaces and coatings are discussed.

Abstract

In an attempt to regain function and aesthetics in the craniofacial region, different biomaterials, including titanium, hydroxyapatite, biodegradable polymers and composites, have been widely used as a result of the loss of craniofacial bone. Although these materials presented favorable success rates, osseointegration and antibacterial properties are often hard to achieve. Although bone-implant interactions are highly dependent on the implant’s surface characteristics, infections following traumatic craniofacial injuries are common. As such, poor osseointegration and infections are two of the many causes of implant failure. Further, as increasingly complex dental repairs are attempted, the likelihood of infection in these implants has also been on the rise. For these reasons, the treatment of craniofacial bone defects and dental repairs for long-term success remains a challenge. Various approaches to reduce the rate of infection and improve osseointegration have been investigated. Furthermore, recent and planned tissue engineering developments are aimed at improving the implants’ physical and biological properties by improving their surfaces in order to develop craniofacial bone substitutes that will restore, maintain and improve tissue function. In this review, the commonly used biomaterials for craniofacial bone restoration and dental repair, as well as surface modification techniques, antibacterial surfaces and coatings are discussed.

참고문헌 (101)

  1. Abu-Serriah MM, "Extra-oral endosseous craniofacial implants: current status and future developments", Int J Oral Maxillofac Surg, 32, pp.452~458 (2003)
  2. Bencharit S, "Challenges and prospective applications of extra-oral implants for maxilloracial rehabilitation", Anaplastology, 1, pp.e103~ (2012)
  3. Wan DC, "Craniofacial bone tissue engineering", Dent Clin North Am, 50, pp.175~190 (2006)
  4. Dumas JE, "Injectable reactive biocomposites for bone healing in critical-size rabbit calvarial defects", Biomed Mater, 7, pp.024112~ (2012)
  5. Kretlow JD, "Biomaterial-based strategies for craniofacial tissue engineering", 박사, pp.2010
  6. Pagni G, "Bone repair cells for craniofacial regeneration", Adv Drug Deliv Rev, 64, pp.1310~1319 (2012)
  7. Kim J, "Fiber-reinforced calcium phosphate cement formulations for cranioplasty applications: a 52-week duration preclinical rabbit calvaria study", J Biomed Mater Res B Appl Biomater, 100, pp.1170~1178 (2012)
  8. Thimmappa B, "Principles of implant-based reconstruction and rehabilitation of craniofacial defects", Craniomaxillofac Trauma Reconstr, 3, pp.33~40 (2010)
  9. Wolfaardt JF, "Craniofacial osseointegration: the Canadian experience", Int J Oral Maxillofac Implants, 8, pp.197~204 (1993)
  10. Kretlow JD, "Injectable biomaterials for regenerating complex craniofacial tissues", Adv Mater, 21, pp.3368~3393 (2009)
  11. Stanford CM, "Surface modifications of dental implants", Aust Dent J, 53(Suppl 1), pp.S26~S33 (2008)
  12. Davies JE, "Understanding peri-implant endosseous healing", Dent Educ, 67, pp.932~949 (2003)
  13. Kuzyk PR, "The basic science of peri-implant bone healing", Indian J Orthop, 45, pp.108~115 (2011)
  14. Wang W, "Orthopaedic implant technology: biomaterials from past to future", Ann Acad Med Singapore, 40, pp.237~244 (2011)
  15. Geetha M, "Ti based biomaterials, the ultimate choice for orthopaedic implants-A review", Prog Mater Sci, 54, pp.397~425 (2009)
  16. Black J, "Handbook of biomaterial properties" (1998), Chapman & Hall
  17. Le Guehennec L, "Osteoblastic cell behaviour on different titanium implant surfaces", Acta Biomater, 4, pp.535~543 (2008)
  18. Norowski PA Jr, "Biomaterial and antibiotic strategies for peri-implantitis: a review", J Biomed Mater Res B Appl Biomater, 88, pp.530~543 (2009)
  19. Shirtliff M, "The role of biofilms in device-related infections" (2009), Springer
  20. Piattelli A, "Localized chronic suppurative bone infection as a sequel of peri-implantitis in a hydroxyapatite-coated dental implant", Biomaterials, 16, pp.917~920 (1995)
  21. Götz F, "Staphylococcus and biofilms", Mol Microbiol, 43, pp.1367~1378 (2002)
  22. Archer NK, "Staphylococcus aureus biofilms: properties, regulation, and roles in human disease", Virulence, 2, pp.445~459 (2011)
  23. Richter WS, "99mTc-besilesomab (Scintimun) in peripheral osteomyelitis: comparison with 99mTc-labelled white blood cells", Eur J Nucl Med Mol Imaging, 38, pp.899~910 (2011)
  24. Yaszemski MJ, "Biomaterials in Orthopedics" (2004), Marcel Dekker
  25. Ramaswamy Y, "Orthopedic coating materials: considerations and applications", Expert Rev Med Devices, 6, pp.423~430 (2009)
  26. Özcan M, "Titanium as a reconstruction and implant material in dentistry: advantages and Pitfalls", Materials, 5, pp.1528~1545 (2012)
  27. Coelho PG, "Basic research methods and current trends of dental implant surfaces", J Biomed Mater Res B Appl Biomater, 88, pp.579~596 (2009)
  28. Jackson MJ, "Surface engineered surgical tools and medical devices" (2007), Springer
  29. Buser D, "Enhanced bone apposition to a chemically modified SLA titanium surface", J Dent Res, 83, pp.529~533 (2004)
  30. Schwarz F, "Effects of surface hydrophilicity and microtopography on early stages of soft and hard tissue integration at non-submerged titanium implants: an immunohistochemical study in dogs", Periodontol, 78, pp.2171~2184 (2007)
  31. Schwarz F, "Histological and immunohistochemical analysis of initial and early osseous integration at chemically modified and conventional SLA titanium implants: preliminary results of a pilot study in dogs", Clin Oral Implants Res, 18, pp.481~488 (2007)
  32. Sul YT, "Qualitative and quantitative observations of bone tissue reactions to anodised implants", Biomaterials, 23, pp.1809~1817 (2002)
  33. Sul YT, "Which surface properties enhance bone response to implants? Comparison of oxidized magnesium, TiUnite, and Osseotite implant surfaces", Int J Prosthodont, 19, pp.319~328 (2006)
  34. Al-Nawas B, "Comparative histomorphometry and resonance frequency analysis of implants with moderately rough surfaces in a loaded animal model", Clin Oral Implants Res, 19, pp.1~8 (2008)
  35. Sul YT, "The bone response of oxidized bioactive and non-bioactive titanium implants", Biomaterials, 26, pp.6720~6730 (2005)
  36. Sul YT, "Resonance frequency and removal torque analysis of implants with turned and anodized surface oxides", Clin Oral Implants Res, 13, pp.252~259 (2002)
  37. Yang Y, "A review on calcium phosphate coatings produced using a sputtering process--an alternative to plasma spraying", Biomaterials, 26, pp.327~337 (2005)
  38. de Groot k, "Plasma-sprayed coating of calcium phosphate, In Handbook of bioactive ceramics, Vol. II: Calcium phosphate and Hydroxyapatite Ceramics", pp.133~142 (1990), CRC Press
  39. Ong JL, "Evaluation of titanium plasma-sprayed and plasma-sprayed hydroxyapatite implants in vivo", Biomaterials, 25, pp.4601~4606 (2004)
  40. Lemons J, "Biomaterials for dental implants, In Contemporary implant dentistry" (1999), Mosby
  41. Lacefield WR, "Current status of ceramic coatings for dental implants", Implant Dent, 7, pp.315~322 (1998)
  42. Kay JF, "Calcium phosphate coatings for dental implants. Current status and future potential", Dent Clin North Am, 36, pp.1~18 (1992)
  43. Lacefield WR, "Hydroxyapatite coatings", Ann N Y Acad Sci, 523, pp.72~80 (1988)
  44. Goené RJ, "Influence of a nanometer-scale surface enhancement on de novo bone formation on titanium implants: a histomorphometric study in human maxillae", Int J Periodontics Restorative Dent, 27, pp.211~219 (2007)
  45. Berglundh T, "Bone healing at implants with a fluoride-modified surface: an experimental study in dogs", Clin Oral Implants Res, 18, pp.147~152 (2007)
  46. Monjo M, "In vitro osteogenic properties of two dental implant surfaces", Int J Biomater, 2012, pp.181024~ (2012)
  47. Abrahamsson I, "Healing at fluoride-modified implants placed in wide marginal defects: an experimental study in dogs", Clin Oral Implants Res, 19, pp.153~159 (2008)
  48. Goodrich JT, "A review of reconstructive materials for use in craniofacial surgery bone fixation materials, bone substitutes, and distractors", Childs Nerv Syst, 28, pp.1577~1588 (2012)
  49. Cho YR, "Biomaterials in craniofacial reconstruction", Clin Plast Surg, 31, pp.377~385 (2004)
  50. Kretlow JD, "Injectable biomaterials for regenerating complex craniofacial tissues", Adv Mater, 21, pp.3368~3393 (2009)
  51. "TiMesh®, Titanized polymers" (2013)[URL]
  52. Schug-Pass C, "A lightweight polypropylene mesh (TiMesh) for laparoscopic intraperitoneal repair of abdominal wall hernias: comparison of biocompatibility with the DualMesh in an experimental study using the porcine model", Surg Endosc, 20, pp.402~409 (2006)
  53. Hollinsky C, "Biomechanical properties of lightweight versus heavyweight meshes for laparo-scopic inguinal hernia repair and their impact on recurrence rates", Surg Endosc, 22, pp.2679~2685 (2008)
  54. Ge X, "Antibacterial coatings of fluoridated hydroxyapatite for percutaneous implants", J Biomed Mater Res A, 95, pp.588~599 (2010)
  55. "Stretching the limits of effective long term drug delivery" (2013)[URL]
  56. Miyamoto Y, "In vivo setting behaviour of fast-setting calcium phosphate cement", Biomaterials, 16, pp.855~860 (1995)
  57. Martin TP, "Initiated chemical vapor deposition of antimicrobial polymer coatings", Biomaterials, 28, pp.909~915 (2007)
  58. Crawford K, "In vitro strength comparison of hydroxyapatite cement and polymethylmethacrylate in subchondral defects in caprine femora", J Orthop Res, 16, pp.715~719 (1998)
  59. Dickson KF, "The use of BoneSource hydroxyapatite cement for traumatic metaphyseal bone void filling", J Trauma, 53, pp.1103~1108 (2002)
  60. Belkoff SM, "An ex vivo biomechanical evaluation of a hydroxyapatite cement for use with vertebroplasty", Spine (Phila Pa 1976), 26, pp.1542~1546 (2001)
  61. "BoneSource: Ostoconductive HA bone paste" (2004)[URL]
  62. Spies CK, "Efficacy of Bone SourceTM and CementekTM in comparison with EndobonTM in critical size metaphyseal defects, using a minipig model", J Appl Biomater Biomech, 8, pp.175~185 (2010)
  63. "Norian SRS" (2012)[URL]
  64. "Norian SRS. Distal radius-impacted intra-articular fracture" (2007)[URL]
  65. "Norian SRS. Cystic lesion (pelvis) - curettage of a cystic lesion" (2006)[URL]
  66. "Norian SRS. Calcaneus" (2006)[URL]
  67. "Biomet Microfixation Mimix® and Mimix® QS Bone Replacement Systems" (2012)[URL]
  68. "Palacos® Bone Cements" (2013)[URL]
  69. "NovaBone: bioactive synthetic bone graft" (2009)[URL]
  70. Verné E, "Bioverit® I base glass", Ti particulate biocomposite: “in situ” vacuum plasma spray deposition, 2000, pp.20, 473~479
  71. Neovius E, "Craniofacial reconstruction with bone and biomaterials: review over the last 11 years", J Plast Reconstr Aesthet Surg, 63, pp.1615~1623 (2010)
  72. "Medpor®" (2013)[URL]
  73. "CLEARSHIELDTM Craniofacial Implant" (2011)[URL]
  74. "LactoSorb® SE: The leader in resorbable technology" (2013)[URL]
  75. "BonAlive®" (2012)[URL]
  76. Harris LG, "Staphylococcus aureus adhesion to titanium oxide surfaces coated with non-functionalized and peptide-functionalized poly(L-lysine)-grafted-poly(ethylene glycol) copolymers", Biomaterials, 25, pp.4135~4148 (2004)
  77. Cheng G, "A switchable biocompatible polymer surface with self-sterilizing and nonfouling capabilities", Angew Chem Int Ed Engl, 47, pp.8831~8834 (2008)
  78. Mohamed Hassan El-Newehy, "Preparation of nylon-6", chitosan composites by nanospider technology and their use as candidate for antibacterial agents, 2013, pp.30(2), 422~428[DOI]
  79. Bílek F, "Preparation of active antibacterial LDPE surface through multistep physicochemical approach II: graft type effect on antibacterial properties", Colloids Surf B Biointerfaces, 102, pp.842~848 (2013)
  80. Zhao C, "Dual functionality of antimicrobial and antifouling of poly(N-hydroxyethylacrylamide)", salicylate hydrogels, 2013, pp.29, 1517~1524
  81. Liu Y, "Characterization and antibacterial properties of genipin-crosslinked chitosan", poly(ethylene glycol), Ag nanocomposites, pp.Carbohydrate Polymers, 2012[DOI]
  82. Tsai MT, "Characterization and antibacterial performance of bioactive Ti-Zn-O coatings deposited on titanium implants", Thin Solid Films, 528, pp.143~150 (2013)
  83. Ketonis C, "Evolving strategies to prevent implant-associated infections", J Am Acad Orthop Surg, 20, pp.478~480 (2012)
  84. Marsich E, "Biological responses of silver-coated thermosets: an in vitro and in vivo study", Acta Biomater, 9, pp.5088~5099 (2013)
  85. Busscher HJ, "van der Mei HC. Biofilm formation on dental restorative and implant materials", J Dent Res, 89, pp.657~665 (2010)
  86. Li L, "In vitro study of biofilm formation and effectiveness of antimicrobial treatment on various dental material surfaces", Mol Oral Microbiol, 25, pp.384~390 (2010)
  87. Vasilev K, "Antibacterial surfaces for biomedical devices", Expert Rev Med Devices, 6, pp.553~567 (2009)
  88. Li Z, "Two-level antibacterial coating with both release-killing and contact-killing capabilities", Langmuir, 22, pp.9820~9823 (2006)
  89. Zilberman M, "Antibiotic-eluting medical devices for various applications", J Control Release, 130, pp.202~215 (2008)
  90. Langer R, "Polymer-controlled drug delivery systems", Acc Chem Res, 26, pp.537~542 (1993)
  91. Potara M, "Synergistic antibacterial activity of chitosan-silver nanocomposites on Staphylococcus aureus", Nanotechnology, 22, pp.135101~ (2011)
  92. White RJ, "An historical overview of the use of silver in wound management", Br J Community Nurs, 6(Silver Suppl 1), pp.3~8 (2001)
  93. Rai M, "Silver nanoparticles as a new generation of antimicrobials", Biotechnol Adv, 27, pp.76~83 (2009)
  94. Lee D, "Antibacterial properties of Ag nanoparticle loaded multilayers and formation of magnetically directed antibacterial microparticles", Langmuir, 21, pp.9651~9659 (2005)
  95. Nair LS, "Silver nanoparticles: synthesis and therapeutic applications", J Biomed Nanotechnol, 3, pp.301~316 (2007)
  96. Panacek A, "Silver colloid nanoparticles: synthesis, characterization, and their antibacterial activity", J Phys Chem B, 110, pp.16248~16253 (2006)
  97. Morones JR, "The bactericidal effect of silver nanoparticles", Nanotechnology, 16, pp.2346~2353 (2005)
  98. Eom HJ, "p38 MAPK activation, DNA damage, cell cycle arrest and apoptosis as mechanisms of toxicity of silver nanoparticles in Jurkat T cells", Environ Sci Technol, 44, pp.8337~8342 (2010)
  99. Li WR, "Antibacterial activity and mechanism of silver nanoparticles on Escherichia coli", Appl Microbiol Biotechnol, 85, pp.1115~1122 (2010)
  100. Pal S, "Does the antibacterial activity of silver nanoparticles depend on the shape of the nanoparticle? A study of the Gram-negative bacterium Escherichia coli", Appl Environ Microbiol, 73, pp.1712~1720 (2007)
  101. de Lima R, "Silver nanoparticles: a brief review of cytotoxicity and genotoxicity of chemically and biogenically synthesized nanoparticles", Appl Toxicol, 32, pp.867~879 (2012)

관련 논문AI추천

이 간행물의 다른 논문 (8건)