본문 바로가기
KERD
논문KCI 등재

Arthroplasty in Femoral Head Osteonecrosis

정광영|조윤제|남동철
대한고관절학회 (The Korean Hip Society)|2014.06|Hip and Pelvis|제26권 제2호|pp. 65-73|DOI http://dx.doi.org/10.5371/hp.2014.26.2.65

2

조회

0

다운로드

0

인용

0

참고문헌

키워드

ArthroplastyHip jointOsteonecrosis of the femoral head

초록

Osteonecrosis of the femoral head is a destructive joint disease requiring early hip arthroplasty. The polyethylene-metal design using a 22-mm femoral head component, introduced by Charnley in 1950, has been widely used for over half a century. Since then, different materials with the capacity to minimize friction between bearing surfaces and various cement or cementless insert fixations have been developed. Although the outcome of second and third generation designs using better bearing materials and technologies has been favorable, less favorable results are seen with total hip arthroplasty in young patients with osteonecrosis. Selection of appropriate materials for hip arthroplasty is important for any potential revisions that might become inevitable due to the limited durability of a prosthetic hip joint. Alternative hip arthroplasties, which include hemiresurfacing arthroplasty and bipolar hemiarthroplasty, have not been found to have acceptable outcomes. Metal-on-metal resurfacing has recently been suggested as a feasible option for young patients with extra physical demands; however, concerns about complications such as hypersensitivity reaction or pseudotumor formation on metal bearings have emerged. To ensure successful long-term outcomes in hip arthroplasty, factors such as insert stabilization and surfaces with less friction are essential. Understanding these aspects in arthroplasty is important to selection of proper materials and to making appropriate decisions for patients with osteonecrosis of the femoral head.

Abstract

Osteonecrosis of the femoral head is a destructive joint disease requiring early hip arthroplasty. The polyethylene-metal design using a 22-mm femoral head component, introduced by Charnley in 1950, has been widely used for over half a century. Since then, different materials with the capacity to minimize friction between bearing surfaces and various cement or cementless insert fixations have been developed. Although the outcome of second and third generation designs using better bearing materials and technologies has been favorable, less favorable results are seen with total hip arthroplasty in young patients with osteonecrosis. Selection of appropriate materials for hip arthroplasty is important for any potential revisions that might become inevitable due to the limited durability of a prosthetic hip joint. Alternative hip arthroplasties, which include hemiresurfacing arthroplasty and bipolar hemiarthroplasty, have not been found to have acceptable outcomes. Metal-on-metal resurfacing has recently been suggested as a feasible option for young patients with extra physical demands; however, concerns about complications such as hypersensitivity reaction or pseudotumor formation on metal bearings have emerged. To ensure successful long-term outcomes in hip arthroplasty, factors such as insert stabilization and surfaces with less friction are essential. Understanding these aspects in arthroplasty is important to selection of proper materials and to making appropriate decisions for patients with osteonecrosis of the femoral head.

참고문헌 (55)

  1. Beaule´ PE, "Management of Ficat stage III and IV osteonecrosis of the hip", J Am Acad Orthop Surg, 12, pp.96~105 (2004)
  2. Lieberman JR, "Osteonecrosis of the hip : management in the 21st century", Instr Course Lect, 52, pp.337~355 (2003)
  3. Assouline-Dayan Y, "Pathogenesis and natural history of osteonecrosis", Semin Arthritis Rheum, 32, pp.94~124 (2002)
  4. Mont MA, "Non-traumatic avascular necrosis of the femoral head", J Bone Joint Surg Am, 77, pp.459~474 (1995)
  5. Brinker MR, "Primary total hip arthroplasty using noncemented porous-coated femoral components in patients with osteonecrosis of the femoral head", J Arthroplasty, 9, pp.457~468 (1994)
  6. Cabanela ME, "Bipolar versus total hip arthroplasty for avascular necrosis of the femoral head. A comparison", Clin Orthop Relat Res, 261, pp.59~62 (1990)
  7. Saito S, "Long-term results of total hip arthroplasty for osteonecrosis of the femoral head. A comparison with osteoarthritis", Clin Orthop Relat Res, 244, pp.198~207 (1989)
  8. Ito H, "Bipolar hemiarthroplasty for osteonecrosis of the femoral head. A 7- to 18-year followup", Clin Orthop Relat Res, 374, pp.201~211 (2000)
  9. Tsumura H, "Five-to fifteenyear clinical results and the radiographic evaluation of acetabular changes after bipolar hip arthroplasty for femoral head osteonecrosis", J Arthroplasty, 20, pp.892~897 (2005)
  10. Mont MA, "Outcomes of limited femoral resurfacing arthroplasty compared with total hip arthroplasty for osteonecrosis of the femoral head", J Arthroplasty, 16, pp.134~139 (2001)
  11. Beaule´ PE, "Duration of symptoms and outcome of hemiresurfacing for hip osteonecrosis", Clin Orthop Relat Res, 385, pp.104~117 (2001)
  12. Cuckler JM, "Outcome of hemiresurfacing in osteonecrosis of the femoral head", Clin Orthop Relat Res, 429, pp.146~150 (2004)
  13. Gabriel JL, "Stem fracture after hemiresurfacing for femoral head osteonecrosis", J Arthroplasty, 18, pp.96~99 (2003)
  14. Tooke SM, "Hemiresurfacing for femoral head osteonecrosis", J Arthroplasty, 2, pp.125~133 (1987)
  15. Grevitt MP, "Avascular necrosis of the hip treated by hemiarthroplasty. Results in renal transplant recipients", J Arthroplasty, 10, pp.205~211 (1995)
  16. Chan YS, "Bipolar versus total hip arthroplasty for hip osteonecrosis in the same patient", Clin Orthop Relat Res, 379, pp.169~177 (2000)
  17. Lachiewicz PF, "The bipolar endoprosthesis in avascular necrosis of the femoral head", J Arthroplasty, 3, pp.131~138 (1988)
  18. Acurio MT, "Hip arthroplasty in patients with sickle-cell haemoglobinopathy", J Bone Joint Surg Br, 74, pp.367~371 (1992)
  19. Lieberman JR, "Hip arthroplasty in patients with chronic renal failure", J Arthroplasty, 10, pp.191~195 (1995)
  20. Park KS, "Conversion total hip arthroplasty after previous transtrochanteric rotational osteotomy for osteonecrosis of the femoral head", J Arthroplasty, 29, pp.813~816 (2014)
  21. Lee YK, "Total hip arthroplasty after previous transtrochanteric anterior rotational osteotomy for femoral head osteonecrosis", J Arthroplasty, 24, pp.1205~1209 (2009)
  22. Kantor SG, "Cemented total hip arthroplasty in patients with osteonecrosis. A 6-year minimum follow-up study of second-generation cement techniques", J Arthroplasty, 11, pp.267~271 (1996)
  23. Garino JP, "Total hip arthroplasty in patients with avascular necrosis of the femoral head : a 2-to 10-year follow-up", Clin Orthop Relat Res, 334, pp.108~115 (1997)
  24. Phillips FM, "Cementless total hip arthroplasty in patients with steroidinduced avascular necrosis of the hip. A 62-month followup study", Clin Orthop Relat Res, 303, pp.147~154 (1994)
  25. Wroblewski BM, "The Charnley hip replacement--43 years of clinical success", Acta Chir Orthop Traumatol Cech, 73, pp.6~9 (2006)
  26. Digas G, "The Otto Aufranc Award. Highly cross-linked polyethylene in total hip arthroplasty: randomized evaluation of penetration rate in cemented and uncemented sockets using radiostereometric analysis", Clin Orthop Relat Res, 429, pp.6~16 (2004)
  27. Cornell CN, "Long-term follow-up of total hip replacement in patients with osteonecrosis", Orthop Clin North Am, 16, pp.757~769 (1985)
  28. Kurtz SM, "Advances in the processing, sterilization, and crosslinking of ultrahigh molecular weight polyethylene for total joint arthroplasty", Biomaterials, 20, pp.1659~1688 (1999)
  29. Sakoda H, "A comparison of the wear and physical properties of silane cross-linked polyethylene and ultra-high molecular weight polyethylene", J Arthroplasty, 16, pp.1018~1023 (2001)
  30. Nich C, "Long-term results of alumina-on-alumina hip arthroplasty for osteonecrosis", Clin Orthop Relat Res, 417, pp.102~111 (2003)
  31. Fye MA, "Total hip arthroplasty performed without cement in patients with femoral head osteonecrosis who are less than 50 years old", J Arthroplasty, 13, pp.876~881 (1998)
  32. Park YS, "Ceramic failure after total hip arthroplasty with an aluminaon-alumina bearing", J Bone Joint Surg Am, 88, pp.780~787 (2006)
  33. Koo KH, "Isolated fracture of the ceramic head after third-generation alumina-on-alumina total hip arthroplasty", J Bone Joint Surg Am, 90, pp.329~336 (2008)
  34. Restrepo C, "The effect of stem design on the prevalence of squeaking following ceramicon-ceramic bearing total hip arthroplasty", J Bone Joint Surg Am, 92, pp.550~557 (2010)
  35. Walter WL, "Retrieval analysis of squeaking alumina ceramic-on-ceramic bearings", J Bone Joint Surg Br, 93, pp.1597~1601 (2011)
  36. Smith-Petersen MN, "Approach to and exposure of the hip joint for mold arthroplasty", J Bone Joint Surg Am, 31A, pp.40~46 (1949)
  37. Smith-Petersen MN, "Principle of mold arthroplasty as applied to the hip", Surg Clin North Am, 27, pp.1303~1306 (1947)
  38. McMinn D, "Metal on metal surface replacement of the hip. Experience of the McMinn prothesis", Clin Orthop Relat Res, (329), pp.S89~S98 (1996)
  39. Daniel J, "Metal-on-metal resurfacing of the hip in patients under the age of 55 years with osteoarthritis", J Bone Joint Surg Br, 86, pp.177~184 (2004)
  40. Clarke MT, "Dislocation after total hip replacement in relation to metal-on-metal bearing surfaces", J Bone Joint Surg Br, 85, pp.650~654 (2003)
  41. Shimmin AJ, "Complications associated with hip resurfacing arthroplasty", Orthop Clin North Am, 36, pp.187~193 (2005)
  42. Higuchi F, "Metal-on-metal CoCrMo McKee-Farrar total hip arthroplasty : characteristics from a long-term follow-up study", Arch Orthop Trauma Surg, 116, pp.121~124 (1997)
  43. Jantsch S, "Long-term results after implantation of McKee-Farrar total hip prostheses", Arch Orthop Trauma Surg, 110, pp.230~237 (1991)
  44. Schmalzried TP, "Metal on metal surface replacement of the hip. Technique, fixation, and early results", Clin Orthop Relat Res, (329), pp.S106~S114 (1996)
  45. Amstutz HC, "Surface replacement of the hip with the Tharies system. Two to fiveyear results", J Bone Joint Surg Am, 63, pp.1069~1077 (1981)
  46. Wagner H, "Surface replacement arthroplasty of the hip", Clin Orthop Relat Res, 134, pp.102~130 (1978)
  47. Beaule´ PE, "Surface arthroplasty for osteonecrosis of the hip: hemiresurfacing versus metal-on-metal hybrid resurfacing", J Arthroplasty, 19, pp.54~58 (2004)
  48. Mont MA, "Use of metal-on-metal total hip resurfacing for the treatment of osteonecrosis of the femoral head", J Bone Joint Surg Am, 88(3), pp.90~97 (2006)
  49. Beaule´ PE, "Hemiresurfacing arthroplasty of the hip for failed free-vascularized fibular graft", J Arthroplasty, 18, pp.519~523 (2003)
  50. de Steiger RN, "Poor outcome of revised resurfacing hip arthroplasty", Acta Orthop, 81, pp.72~76 (2010)
  51. de Steiger RN, "Five-year results of the ASR XL Acetabular System and the ASR Hip Resurfacing System : an analysis from the Australian Orthopaedic Association National Joint Replacement Registry", J Bone Joint Surg Am, 93, pp.2287~2293 (2011)
  52. Hug KT, "The withdrawn ASRTM THA and hip resurfacing systems: how have our patients fared over 1 to 6 years?", Clin Orthop Relat Res, 471, pp.430~438 (2013)
  53. Delaunay C, "Metal-on-metal bearings total hip arthroplasty : the cobalt and chromium ions release concern", Orthop Traumatol Surg Res, 96, pp.894~904 (2010)
  54. Grosclaude S, "Iliopsoas bursal distension revealing complication of total hip arthroplasty : five cases", Rev Chir Orthop Reparatrice Appar Mot, 92, pp.351~357 (2006)
  55. Hananouchi T, "Huge pelvic mass secondary to wear debris causing ureteral obstruction", J Arthroplasty, 20, pp.946~949 (2005)

관련 논문AI추천

Hip Resurfacing Arthroplasty after Failure of Tantalum Rod Insertion in Patients with Osteonecrosis of the Femoral Head유기형, 전영수, 조윤제, Hyun Gon Gwak대한고관절학회 · Hip and Pelvis2022 · 제34권 제4호Total Hip Arthroplasty: Past, Present, and Future. What Has Been Achieved?손원용, Beyoung Yun Park, Ho Hyun Yun, Jung Taek Im, Phil Sun Park, Rajsankar N R대한고관절학회 · Hip and Pelvis2019 · 제31권 제4호대퇴골두 무혈성괴사에서 시행한 금속-금속 관절면을 포함한 무시멘트인공고관절 전치환술김영호,박기철 김학수,최일용대한고관절학회 · Hip and Pelvis2002 · 제14권 제1호Current Concepts of Using Large Femoral Heads in Total Hip Arthroplasty김재정, 조명래, 최원기대한고관절학회 · Hip and Pelvis2016 · 제28권 제3호Outcomes of Primary Cementless Total Hip Arthroplasty for Rapidly Destructive Coxarthrosis from Osteonecrosis of the Femoral Head: A Matched Cohort StudyCheolsoon Park, Ji Hoon Bahk, Joo-Hyoun Song, Kee-Haeng Lee, Youngwook Lim대한고관절학회 · Hip and Pelvis2025 · 제37권 제2호Updating Osteonecrosis of the Femoral HeadJoo Hyung Ha, Jung-Wee Park, Kyung-Hoi Koo, Lee Young-Kyun, Tae Young Kim, Young-Seung Ko대한고관절학회 · Hip and Pelvis2023 · 제35권 제3호

이 간행물의 다른 논문 (9건)

On the Occasion of the Publication of the English Version of “Hip & Pelvis”박윤수pp. 63-64Neurovascular Injury in Hip Arthroplasty양익환pp. 74-78Treatment of Unstable Pelvic Ring Injuries김원유pp. 79-83Primary Total Hip Arthroplasty Using Third Generation Ceramic-Ceramic Articulation: Results after a Minimum of Three-years of Follow-up황성관, 이동우pp. 84-91Meta-analysis of the Incidence and Risk Factors for Squeaking after Primary Ceramic-on-ceramic Total Hip Arthroplasty in Asian Patients임승재, 박윤수, 문영완, 이태훈pp. 92-98
원문 보기