니켈티타늄 전동파일의 파절과임상적 예후
Fracture of Nickel-Titanium Rotary Instruments and its Clinical Prognosis
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
1988년 스테인리스스틸 파일을 대체할 수 있는 유용한 재료로 초탄성(super-elasticity) 특징을 가진니켈티타늄(Nickel-Titanium; NiTi) 합금으로 만들어진 파일이 소개된 이후 20여 년이 경과하는 동안그 사용이 점진적으로 증가해 가고 있다1, 2). 스테인리스스틸 파일을 능가하는 NiTi 파일의 다양한 효용성을 지지하는 연구 결과가 많이 발표되고 있고, 이와 함께 많은 제조사들이 각기 고유의 특징과 장점을 주장하며 여러 가지 니켈티타늄 파일을 시판하고 있다3, 4). 국내에서도 최근 10년 그 사용이 폭발적으로 증가하는 추세라고 보여진다. 그러나, 임상에서의 사용이 증가함과 동시에, 사용 중 불가항력적으로 나타나는 파일의 파절 문제가 사용할 때마다 늘 함께하는 두려움과 고민거리가 되고 있다.
Abstract
Nickel-Titanium(NiTi) rotary instruments have brought a big step toward “efficient” practice of endodontic procedure. Therotary files help clinicians to reduce their working time and also increase the clinical success rate with minimal procedural errorsby stainless steel instruments. In spite of these advantages, NiTi instruments still have a few drawbacks including unpredictablefatigue fracture. Clinicians may reduce the potential risk of instruments fracture by following some clinical guidelines for rotaryinstruments. In some clinical cases of instruments fracture, we may try to remove the instruments’ fragments or bypass thefragment to reach the apical canal. In some limited cases, the fractured instruments’ fragments would not jeopardize the clinicalprognosis of root canal treatment. However, it is impossible to be overemphasized that the fragment removal is more difficult thanthe prevention of fracture. Clinicians need to understand the fracture mechanisms and, in clinic, need to discard the usedinstruments timely.
참고문헌 (18)
- Walia HM, "An initial investigation of the bending and torsional properties of Nitinol root canal files", J Endod, 14, pp.346~351 (1988)
- Thompson SA., "An overview of nickel?titanium alloys used in dentistry", Int Endod J, 33, pp.297~310 (2000)
- Glosson CR, "A comparison of root canal preparations using Ni?Ti hand, Ni?Ti engine-driven, and K-Flex endodontic instruments", J Endod, 21, pp.146~151 (1995)
- Peters OA., "Current challenges and concepts in the preparation of root canal systems: a review", J Endod, 30, pp.559~567 (2004)
- Parashos P, "Rotary NiTi instrument fracture and its consequences", J Endod, 32, pp.1031~1043 (2006)
- Tzanetakis GN, "Prevalence and management of instrument fracture in the postgraduate endodontic program at the Dental School of Athens: a fiveyear retrospective clinical study", J Endod, 34, pp.675~678 (2008)
- Bahia MGA, "Physical and mechanical characterization and the influence of cyclic loading on the behaviour of nickel-titanium wires employed in the manufacture of rotary endodontic instruments", Int Endod J, 38, pp.795~801 (2005)
- Cheung GS, "Effect of torsional loading of nickel-titanium instruments on cyclic fatigue resistance", J Endod, 39, pp.1593~1597 (2013)
- Kim HC, "Comparison of Forces Generated During Root Canal Shaping and Residual Stresses of Three Nickel?Titanium Rotary Files by Using a Three-Dimensional Finite-element Analysis", J Endod, 34, pp.743~747 (2008)
- Kim HC, "Versluis A. Mechanical response of nickel-titanium instruments with different cross-sectional designs during shaping of simulated curved canals", Int Endod J, 42, pp.593~602 (2009)
- Kim HC, "Potential Relationship between Design of Nickel-Titanium Rotary Instruments and Vertical Root Fracture", JOURNAL OF ENDODONTICS, 36, pp.1195~1199 (2010), ELSEVIER SCIENCE INC
- Kim JY, "Effect from cyclic fatigue of nickeltitanium rotary files on torsional resistance", J Endod, 38, pp.527~530 (2012)
- Kim TO, "Stress distribution of three NiTi rotary files under bending and torsional conditions using a mathematic analysi", Int Endod J, 42, pp.14~21 (2009)
- Park SY, "Dynamic Torsional Resistance of Nickel-Titanium Rotary Instruments", J Endod, 36, pp.1200~1204 (2010)
- Bössler C, "Impact of lubricant parameter on rotary instrument torque and force", J Endod, 33, pp.280~283 (2007)
- Spili P, "The impact of instrument fracture on outcome of endodontic treatment", J Endod, 31, pp.845~850 (2005)
- Berutti E, Paolino DS, "Root canal anatomy preservation of WaveOne reciprocating files with or without glide path", J Endod, 38, pp.101~104 (2012)
- Bürklein S, "Apically extruded debris with reciprocating single-file and full-sequence rotary instrumentation systems", J Endod, 38, pp.850~852 (2012)