비골 유리 피판을 이용한 하악골 재건시 디지털 기술을 이용한 수술의 시뮬레이션 및 수술용 가이드 제작의 효용성
Computer assisted simulation surgery & surgical guide fabrication for Mandibular reconstruction using fibula free flap
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The purpose of this study is to compare and evaluate the methods through computer-assisted simulation surgery and surgical guide production in mandibular reconstruction using the fibula and the existing traditional method. From February 2021 to July 2022, 10 patients who underwent segmental mandibulectomy at our hospital for two years were evaluated for operation time and reconstruction time. 10 patients underwent segmental mandibulectomy and reconstruction using a surgical guide prepared in advance through 3D analysis. In addition, we compared and analyzed 5 patients who had undergone surgery by the conventional method. In segmental mandibulectomy using a surgical guide, the average operating time was 443.50 minutes with the standard deviation (SD): 88.696, and the average reconstruction time was 64.90 minutes with the standard deviation: 11.377. The average operation time using the conventional method was 517.00 minutes with the standard deviation (SD): 83.86, the average reconstruction time 77.80 minutes with the standard deviation (SD): 8.075. When the average operation time was compared, the p-value was 0.148, which was not statistically significant. In the comparison of the average reconstruction times, the p-value was 0.0425, which was statistically significant. In conclusion, it was found that in the case of mandibular reconstruction using the fibula, the operation time was shortened along with the decrease of the time in the reconstruction. The operation time in the conventional method was longer than that of the surgical guide method.
Abstract
The purpose of this study is to compare and evaluate the methods through computer-assisted simulation surgery and surgical guide production in mandibular reconstruction using the fibula and the existing traditional method. From February 2021 to July 2022, 10 patients who underwent segmental mandibulectomy at our hospital for two years were evaluated for operation time and reconstruction time. 10 patients underwent segmental mandibulectomy and reconstruction using a surgical guide prepared in advance through 3D analysis. In addition, we compared and analyzed 5 patients who had undergone surgery by the conventional method. In segmental mandibulectomy using a surgical guide, the average operating time was 443.50 minutes with the standard deviation (SD): 88.696, and the average reconstruction time was 64.90 minutes with the standard deviation: 11.377. The average operation time using the conventional method was 517.00 minutes with the standard deviation (SD): 83.86, the average reconstruction time 77.80 minutes with the standard deviation (SD): 8.075. When the average operation time was compared, the p-value was 0.148, which was not statistically significant. In the comparison of the average reconstruction times, the p-value was 0.0425, which was statistically significant. In conclusion, it was found that in the case of mandibular reconstruction using the fibula, the operation time was shortened along with the decrease of the time in the reconstruction. The operation time in the conventional method was longer than that of the surgical guide method.
참고문헌 (20)
- Brett A Miles, "Mandible reconstruction", Current Opinion in Otolaryngology & Head and Neck Surgery, 18(4), pp.317~322 (2010), Ovid Technologies (Wolters Kluwer Health)[DOI]
- Adir Cohen, "Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology", Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology, 108(5), pp.661~666 (2009), Elsevier BV[DOI]
- Jose M. López-Arcas, "The Fibula Osteomyocutaneous Flap for Mandible Reconstruction: A 15-Year Experience", Journal of Oral and Maxillofacial Surgery, 68(10), pp.2377~2384 (2010), Elsevier BV[DOI]
- Choi, E.C, "Mandibular reconstruction using free fibular osteocutanueous flap", Korean J Otolaryngol, 39, pp.103~110 (1996)
- Joel Ferri, "Advantages and limitations of the fibula free flap in mandibular reconstruction", Journal of Oral and Maxillofacial Surgery, 55(5), pp.440~448 (1997), Elsevier BV[DOI]
- 유상일, "구강암 환자의 재건술", 대한치과의사협회지, 48(8), pp.607~614 (2010), 대한치과의사협회[DOI]
- Xiao-jing Liu, "Applying Computer Techniques in Maxillofacial Reconstruction Using a Fibula Flap", Journal of Craniofacial Surgery, 20(2), pp.372~377 (2009), Ovid Technologies (Wolters Kluwer Health)[DOI]
- Bernd Lethaus, "Reconstruction of a maxillary defect with a fibula graft and titanium mesh using CAD", CAM techniques, 2010, pp.6(1), ~[DOI]
- J. Kraeima, "Multi-modality 3D mandibular resection planning in head and neck cancer using CT and MRI data fusion: A clinical series", Oral Oncology, 81, pp.22~28 (2018), Elsevier BV[DOI]
- Jiewen Dai, "Two- and Three-Dimensional Models for the Visualization of Jaw Tumors Based on CT–MRI Image Fusion", Journal of Craniofacial Surgery, 23(2), pp.502~508 (2012), Ovid Technologies (Wolters Kluwer Health)[DOI]
- J. Weitz, "Accuracy of mandibular reconstruction by three-dimensional guided vascularised fibular free flap after segmental mandibulectomy", British Journal of Oral and Maxillofacial Surgery, 54(5), pp.506~510 (2016), Elsevier BV[DOI]
- G. Succo, "Step-by-step surgical technique for mandibular reconstruction with fibular free flap: application of digital technology in virtual surgical planning", European Archives of Oto-Rhino-Laryngology, 272(6), pp.1491~1501 (2014), Springer Science and Business Media LLC[DOI]
- W Ren, "Virtual Planning and 3D printing modeling for mandibular reconstruction with fibula free flap", Medicina Oral Patología Oral y Cirugia Bucal, pp.0~0 (2018), Medicina Oral, S.L.[DOI]
- E. Stirling Craig, "Simulated surgery and cutting guides enhance spatial positioning in free fibular mandibular reconstruction", Microsurgery, 35(1), pp.29~33 (2014), Wiley[DOI]
- Nicolai Adolphs, "Virtual planning for craniomaxillofacial surgery – 7 Years of experience", Journal of Cranio-Maxillofacial Surgery, 42(5), pp.e289~e295 (2014), Elsevier BV[DOI]
- Bo-Yeon Hwang, "Computer-Assisted Preoperative Simulations and 3D Printed Surgical Guides Enable Safe and Less-Invasive Mandibular Segmental Resection: Tailor-Made Mandibular Resection", Applied Sciences, 10(4), pp.1325~ (2020), MDPI AG[DOI]
- Joris Geusens, "Accuracy of Computer-Aided Design", Computer-Aided Manufacturing-Assisted Mandibular Reconstruction With a Fibula Free Flap, 2019, pp.30(8), 2319~2323[DOI]
- Ahmed Hassan Sweed, "Factors influencing CAD", CAM accuracy in fibula free flap mandibular reconstruction, 2020, pp.40(2), 138~143[DOI]
- Se-Ho Lim, "Precision of fibula positioning guide in mandibular reconstruction with a fibula graft", Head & Face Medicine, 12(1) (2016), Springer Science and Business Media LLC[DOI]
- A. N. Zeller, "Patient-Specific Mandibular Reconstruction Plates Increase Accuracy and Long-Term Stability in Immediate Alloplastic Reconstruction of Segmental Mandibular Defects", Journal of Maxillofacial and Oral Surgery, 19(4), pp.609~615 (2020), Springer Science and Business Media LLC[DOI]