Jammer Identification Technique based on a Template Matching Method
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
GNSS has the disadvantage of being vulnerable to jamming, and thus, the necessity of jamming countermeasure techniques has gradually increased. Jamming countermeasure techniques can be divided into an anti-jamming technique and a jammer localization technique. Depending on the type of a jammer, applicable techniques and performance vary significantly. Using an appropriate jamming countermeasure technique, the effect of jamming on a GNSS receiver can be attenuated, and prompt action is enabled when estimating the location of a jammer. However, if an inappropriate jamming countermeasure technique is used, a GNSS receiver may not operate in the worst case. Therefore, jammer identification is a technique that is essential for proper action. In this study, a technique that identifies a jammer based on template matching was proposed. For template matching, analysis of a received jamming signal is required; and the signal analysis was performed using a spectral correlation function. Based on a simulation, it was shown that the proposed identification of jamming signals was possible at various JNR.
Abstract
GNSS has the disadvantage of being vulnerable to jamming, and thus, the necessity of jamming countermeasure techniques has gradually increased. Jamming countermeasure techniques can be divided into an anti-jamming technique and a jammer localization technique. Depending on the type of a jammer, applicable techniques and performance vary significantly. Using an appropriate jamming countermeasure technique, the effect of jamming on a GNSS receiver can be attenuated, and prompt action is enabled when estimating the location of a jammer. However, if an inappropriate jamming countermeasure technique is used, a GNSS receiver may not operate in the worst case. Therefore, jammer identification is a technique that is essential for proper action. In this study, a technique that identifies a jammer based on template matching was proposed. For template matching, analysis of a received jamming signal is required; and the signal analysis was performed using a spectral correlation function. Based on a simulation, it was shown that the proposed identification of jamming signals was possible at various JNR.
참고문헌 (8)
- Deza, M. M., "Encyclopedia of Distances" (2009), Springer
- William A. Gardner, "The spectral correlation theory of cyclostationary time-series", Signal Processing, 11(1), pp.13~36 (1986), Elsevier BV[DOI]
- Godara, L. C., "Smart Antennas" (2004), CRC Press
- Kamen, E. W., "Fundamentals of Signals and Systems Using the Web and Matlab" (2000), Prentice Hall International
- Kraus, T., "Survey of In- Car Jammers – Analysis and Modeling of the RF signals and IF samples (suitable for active signal cancellation)", Proceedings of ION GNSS (2011)
- Mitch, R. H., "Signal Characteristics of Civil GPS Jammers", Proceedings of ION GNSS (2011)
- R. Schmidt, "Multiple emitter location and signal parameter estimation", IEEE Transactions on Antennas and Propagation, 34(3), pp.276~280 (1986), Institute of Electrical & Electronics Engineers (IEEE)[DOI]
- J. Smith, "Closed-form least-squares source location estimation from range-difference measurements", IEEE Transactions on Acoustics, Speech, and Signal Processing, 35(12), pp.1661~1669 (1987), Institute of Electrical & Electronics Engineers (IEEE)[DOI]