A Performance Analysis of Multi-GNSS Receiver with Various Intermediate Frequency Plans Using Single RF Front-end
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
In this study, to design a multi-GNSS receiver using single RF front-end, the receiving performances for various frequency plans were evaluated. For the fair evaluation and comparison of different frequency plans, the same signal needs to be received at the same time. For this purpose, two synchronized RF front-ends were configured using USRP X310, and PCbased software was implemented so that the quality of the digital IF signal received at each front-end could be evaluated. The software consisted of USRP control, signal reception, signal acquisition, signal tracking, and C/N0 estimation function. Using the implemented software and USRP-based hardware, the signal receiving performances for various frequency plans, such as the signal attenuation status, overlapping of different systems, and the use of imaginary or real signal, were evaluated based on the C/N0 value. The results of the receiving performance measurement for the various frequency plans suggested in this study would be useful reference data for the design of a multi-GNSS receiver in the future.
Abstract
In this study, to design a multi-GNSS receiver using single RF front-end, the receiving performances for various frequency plans were evaluated. For the fair evaluation and comparison of different frequency plans, the same signal needs to be received at the same time. For this purpose, two synchronized RF front-ends were configured using USRP X310, and PCbased software was implemented so that the quality of the digital IF signal received at each front-end could be evaluated. The software consisted of USRP control, signal reception, signal acquisition, signal tracking, and C/N0 estimation function. Using the implemented software and USRP-based hardware, the signal receiving performances for various frequency plans, such as the signal attenuation status, overlapping of different systems, and the use of imaginary or real signal, were evaluated based on the C/N0 value. The results of the receiving performance measurement for the various frequency plans suggested in this study would be useful reference data for the design of a multi-GNSS receiver in the future.
참고문헌 (11)
- "GNSS Interference Threats and Countermeasures" (2015)[URL]
- "Are carrier-to-noise algorithms equivalent in all situations?" (2010)[URL]
- "LA20RPDC Line Amplifier 20 dB Gain Technical Product Data" (2015)[URL]
- "ADCBS1X4 Passive 1X4 GPS Splitter Technical Product Data" (2015)[URL]
- Kaplan, E. D, "Understanding GPS:Principles and Applications" (2006), Artech house
- 박귀우, "Implementation and Performance Analysis of Multi-GNSS Signal Collection System using Single USRP", Journal of Positioning, Navigation, and Timing, 5(1), pp.11~20 (2016), 사단법인 항법시스템학회[DOI]
- Park, K. W, "Design of a buffer management algorithm for USRP based real-time GNSS SDR", 2016 KGS conference (2016)
- Park, K. W, "Design of Signal Acquisition and Tracking Process Based on Multi-Thread for Real-time GNSS Software Receiver", Proceedings of the ICL-GNSS 2016 (2016)
- "GPS-701-GGL and GPS-702-GGL USER GUIDE, OM-20000117" (2013)[URL]
- "NEO/LEA-M8T u-blox M8 concurrent GNSS timing modules data sheet, UBX-14006196-R06" (2015)[URL]
- Ziemer, R. E, "Principles of Communications: System Modulation and Noise" (2006), John Wiley & Sons