Variations in Growth Characteristics and Stress-wave Velocities of Zelkova serrata Trees from Eight Half-sib Families Planted in Three Different Initial Spacings
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Zelkova serrata is an important hardwood species for the timber industry in Japan. Tree breeding programs for this species have mainly focused on growth characteristics such as stem diameter (D), tree height (TH), stem form, and branching. In order to fulfill timber industry needs, wood quality improvement should be included in the tree breeding program of this species. In the present study, growth characteristics, such as D and TH, and the stress-wave velocity (SWV), which is highly correlated with Young’s modulus of wood, were measured for 20-year-old Z. serrata from eight half-sib families planted in a progeny test site with three different initial spacings. Significant differences in all the measured characteristics were found among the eight half-sib families. The variance components of the half-sib families for D, TH, and SWV were 27.2%, 47.3%, and 33.5%, respectively. These results indicate that all the measured characteristics of this species could be improved by tree breeding programs. In addition, only low correlation coefficients were obtained between the growth characteristics and SWV, indicating that extensive selection on SWV in tree breeding programs may not always lead to a reduction in yield volume.
Abstract
Zelkova serrata is an important hardwood species for the timber industry in Japan. Tree breeding programs for this species have mainly focused on growth characteristics such as stem diameter (D), tree height (TH), stem form, and branching. In order to fulfill timber industry needs, wood quality improvement should be included in the tree breeding program of this species. In the present study, growth characteristics, such as D and TH, and the stress-wave velocity (SWV), which is highly correlated with Young’s modulus of wood, were measured for 20-year-old Z. serrata from eight half-sib families planted in a progeny test site with three different initial spacings. Significant differences in all the measured characteristics were found among the eight half-sib families. The variance components of the half-sib families for D, TH, and SWV were 27.2%, 47.3%, and 33.5%, respectively. These results indicate that all the measured characteristics of this species could be improved by tree breeding programs. In addition, only low correlation coefficients were obtained between the growth characteristics and SWV, indicating that extensive selection on SWV in tree breeding programs may not always lead to a reduction in yield volume.
참고문헌 (22)
- Bucur V, "Acoustics of Wood" (2006), Springer-Verlag
- Dickson RL, "Segregation of Eucalyptus dunnii Logs using acoustics", For Ecol Manag, 179, pp.243~251 (2003)
- Endo R, "Characters of Excellent Family of Zelkova serrata (Thunb.) Makino in Chiba Prefecture:Narrow-sense Heritability of age-4", Res Rep Chiba Pref For Res Inst, 9, pp.1~4 (1998)
- Falconer DS, "Introduction to quantitative genetics" (1996), Pearson Prentice Hall
- Hai PH, "Wood stiffness and strength as selection traits for sawn timber in Acacia auriculiformis", Can J For Res, 40, pp.322~329 (2010)
- Hai PH, "Genetic variation in growth, stem straightness and branch thickness in clonal trials of Acacia auriculiformis at three contrasting sites in Vietnam", For Ecol Manag, 255, pp.156~167 (2008)
- Hidayati F, "growth characteristics, stress-wave velocity, Pilodyn penetration of 15 clones of 12-year-old Tectona grandis trees planted at two different sites in Indonesia", J Wood Sci, 59, pp.249~254 (2013)
- Isamoto N, "Anatomical characteristics on wood quality of the three strain of keyaki (Zelkova serrata)", J Jpn For Soc, 82, pp.87~90 (2000)
- Ishiguri F, "Variation in the wood properties of Paraserianthes falcataria planted in Indonesia", IAWA J, 28, pp.339~348 (2007)
- Itoh T, "Useful trees of Japan : a color guide" (2011), Kaiseisha Press
- Kidoguchi S, "Selection of keyaki (Zelkova serrata) plus trees and establishment of exhibition forest", Bull Iwate Pref For Technol Center, 18, pp.1~6 (2010)
- Kollmann FFP, "Principles of wood science and technology vol. I: Solid Wood" (1984), Springer-Verlag
- Lynch M, "Genetics and analysis of quantitative traits" (1998), Sinauer Associates
- Mertz M, "Wood and traditional woodworking in Japan" (2011), Kaiseisha Press
- Ratcliffe B, "Genetics of wood quality attributes in Western Larch", Ann For Sci, 71, pp.415~424 (2014)
- Volker PW, "Genetic parameters and gains expected from selection in Eucalyptus globulus in Tasmania", Silvae Genet, 39, pp.18~21 (1990)
- Wang X, "Nondestructive Evaluation of Standing Trees with a Strees Wave Method", Wood Fiber Sci, 33, pp.522~533 (2001)
- Warren E, "Effect of stocking on juvenile wood stiffness for three Eucalyptus species", New For, 37, pp.241~250 (2009)
- Wu S, "Genotypic variation in wood properties and growth traits of Eucalyptus hybrid clones in Southern China", New For, 42, pp.35~50 (2011)
- Yoshino Y, "Progeny test trial of open-pollinated Zelkova serrata families: growth of trees 12 years after planting", Res Rep Hyogo Pref Technol Center Agri For and Fish, 53, pp.52~55 (2006)
- Zobel BJ, "Genetics of wood production" (1995), Springer
- Zobel BJ, "Wood variation, its causes and control" (1989), Springer