Effect of metal primers and tarnish treatment on bonding between dental alloys and veneer resin
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
PURPOSE. The aim of this study was to evaluate the effect of metal primers on the bonding of dental alloys and veneer resin. Polyvinylpyrrolidone solution’ tarnish effect on bonding strength was also investigated. MATERIALS AND METHODS. Disk-shape metal specimens (diameter 8 mm, thickness 1.5 mm) were made from 3 kinds of alloy (Co-Cr, Ti and Au-Ag-Pd alloy) and divided into 4 groups per each alloy. Half specimens (n=12 per group) in tarnished group were immersed into polyvinylpyrrolidone solution for 24 hours. In Co-Cr and Ti-alloy, Alloy Primer (MDP + VBATDT) and MAC-Bond II (MAC-10) were applied, while Alloy Primer and V-Primer (VBATDT) were applied to Au-Ag-Pd alloys. After surface treatment, veneering composite resin were applied and shear bond strength test were conducted. RESULTS. Alloy Primer showed higher shear bond strength than MAC-Bond II in Co-Cr alloys and Au-Ag-Pd alloy (P<.05). However, in Ti alloy, there was no significant difference between Alloy Primer and MAC-Bond II. Tarnished Co-Cr and Au-Ag-Pd alloy surfaces presented significantly decreased shear bond strength. CONCLUSION. Combined use of MDP and VBATDT were effective in bonding of the resin to Co-Cr and Au-Ag-Pd alloy. Tarnish using polyvinylpyrrolidone solution negatively affected on the bonding of veneer resin to Co-Cr and Au-Ag-Pd alloys.
Abstract
PURPOSE. The aim of this study was to evaluate the effect of metal primers on the bonding of dental alloys and veneer resin. Polyvinylpyrrolidone solution’ tarnish effect on bonding strength was also investigated. MATERIALS AND METHODS. Disk-shape metal specimens (diameter 8 mm, thickness 1.5 mm) were made from 3 kinds of alloy (Co-Cr, Ti and Au-Ag-Pd alloy) and divided into 4 groups per each alloy. Half specimens (n=12 per group) in tarnished group were immersed into polyvinylpyrrolidone solution for 24 hours. In Co-Cr and Ti-alloy, Alloy Primer (MDP + VBATDT) and MAC-Bond II (MAC-10) were applied, while Alloy Primer and V-Primer (VBATDT) were applied to Au-Ag-Pd alloys. After surface treatment, veneering composite resin were applied and shear bond strength test were conducted. RESULTS. Alloy Primer showed higher shear bond strength than MAC-Bond II in Co-Cr alloys and Au-Ag-Pd alloy (P<.05). However, in Ti alloy, there was no significant difference between Alloy Primer and MAC-Bond II. Tarnished Co-Cr and Au-Ag-Pd alloy surfaces presented significantly decreased shear bond strength. CONCLUSION. Combined use of MDP and VBATDT were effective in bonding of the resin to Co-Cr and Au-Ag-Pd alloy. Tarnish using polyvinylpyrrolidone solution negatively affected on the bonding of veneer resin to Co-Cr and Au-Ag-Pd alloys.
참고문헌 (30)
- Berge M, "Properties of prosthetic resin-veneer materials processed in commercial laboratories", Dent Mater, 5, pp.77~82 (1989)
- Jones RM, "A comparison of the physical properties of four prosthetic veneering materials", J Prosthet Dent, 61, pp.38~44 (1989)
- Staffanou RS, "Abrasion resistance of three types of esthetic veneering materials", J Prosthet Dent, 53, pp.309~310 (1985)
- Jones RM, "Microleakage and shear bond strength of resin and porcelain veneers bonded to cast alloys", J Prosthet Dent, 65, pp.221~228 (1991)
- Cobb DS, "Metal surface treatment: characterization and effect on compositeto-metal bond strength", Oper Dent, 25, pp.427~433 (2000)
- Di Francescantonio M, "Adhesive bonding of resin cements to cast titanium with adhesive primers", Braz Dent J, 23, pp.218~222 (2012)
- Stoknorm R, "Tensile bond strength of resin luting cement to a porcelain-fusing noble alloy", Int J Prosthodont, 9, pp.323~330 (1996)
- Kim JY, "Effect of laboratory procedures and thermocycling on the shear bond strength of resin-metal bonding systems", J Prosthet Dent, 90, pp.184~189 (2003)
- Kern M, "Influence of prolonged thermal cycling and water storage on the tensile bond strength of composite to NiCr alloy", Dent Mater, 10, pp.19~25 (1994)
- Koizumi H, "Adhesive bonding of Ti-6Al-7Nb alloy and component metals with acidic primers and a tri-n-butylborane initiated resin", J Adhes Dent, 14, pp.283~292 (2012)
- Tanaka T, "4-META opaque resin--a new resin strongly adhesive to nickel-chromium alloy", J Dent Res, 60, pp.1697~1706 (1981)
- 이나영, "금속의치상과 의치이장재료 간의 결합력에 관한 연구", 대한치과보철학회지, 49(01), pp.8~15 (2011), 대한치과보철학회
- Ikemura K, "A review of the developments of multi-purpose primers and adhesives comprising novel dithiooctanoate monomers and phosphonic acid monomers", Dent Mater J, 31, pp.1~25 (2012)
- Sarafianou A, "Effectiveness of different adhesive primers on the bond strength between an indirect composite resin and a base metal alloy", J Prosthet Dent, 99, pp.377~387 (2008)
- 김수성, "Effect of adhesive primers on bonding strength of heat cure denture base resin to cast titanium and cobalt-chromium alloy", The Journal of Advanced of Prosthodontics, 1(1), pp.41~46 (2009), 대한치과보철학회
- Taira Y, "Influence of surface oxidation of titanium on adhesion", J Dent, 26, pp.69~73 (1998)
- Matsumura H, "Shear bond strength of resin composite veneering material to gold alloy with varying metal surface preparations", J Prosthet Dent, 86, pp.315~319 (2001)
- Matsumura H, "Bonding of a cobalt-chromium alloy with acidic primers and tri-n-butylborane-initiated luting agents", J Prosthet Dent, 76, pp.194~199 (1996)
- Kadoma Y, "Adhesive properties and kinetic polymerization behavior of resins containing adhesion promoting monomers for precious metals", Dent Mater J, 24, pp.335~341 (2005)
- Okuya N, "Effects of metal primers on bonding of adhesive resin cement to noble alloys for porcelain fusing", Dent Mater J, 29, pp.177~187 (2010)
- Minami H, "Effects of metal primers on the bonding of an adhesive resin cement to noble metal ceramic alloys after thermal cycling", J Prosthet Dent, 106, pp.378~385 (2011)
- Koizumi H, "Effects of triazine dithione and hydrophobic phosphate monomers on bonding to Ag-Pd-Cu-Au alloy and titanium with a methacrylic resin-based luting agent", J Adhes Dent, 12, pp.215~222 (2010)
- Suzuki M, "Raman and IR studies on adsorption behavior of adhesive monomers in a metal primer for Au, Ag, Cu, and Cr surfaces", J Biomed Mater Res, 62, pp.37~45 (2002)
- Minami H, "Effect of adhesion promoting monomer addition to MMA-TBBO resin on bonding to pure palladium", Dent Mater J, 32, pp.173~180 (2013)
- Viennot S, "Corrosion resistance of cobalt-chromium and palladium-silver alloys used in fixed prosthetic restorations", Eur J Oral Sci, 113, pp.90~95 (2005)
- Anusavice K, "Phillip’s science of dental materials" (2012), Elsevier
- Takasusuki N, "In vitro corrosion of dental Au-based casting alloys in polyvinylpyrrolidone-iodine solution", Dent Mater J, 32, pp.390~397 (2013)
- Gale MS, "Thermal cycling procedures for laboratory testing of dental restorations", J Dent, 27, pp.89~99 (1999)
- Banerjee S, "In vitro tensile bond strength of denture repair acrylic resins to primed base metal alloys using two different processing techniques", J Prosthodont, 18, pp.676~683 (2009)
- Taira Y, "Effects of primers containing sulfur and phosphate monomers on bonding type IV gold alloy", J Dent, 36, pp.595~599 (2008)