본문 바로가기
KERD
논문KCI 등재

Comparison of shear bond strengths of different types of denture teeth to different denture base resins

Vladimir Prpić|Zdravko Schauperl|Domagoj Glavina|Amir Ćatić|Samir Čimić
대한치과보철학회 (The Korean Academy Of Prosthodontics)|2020.12|The Journal of Advanced of Prosthodontics|제12권 제6호|pp. 376-382|DOI https://doi.org/10.4047/jap.2020.12.6.376

2

조회

0

다운로드

0

인용

0

참고문헌

키워드

Complete dentureDigital dentureAcrylicsPrefabricated teeth

초록

PURPOSE. To determine the shear bond strengths of different denture base resins to different types of prefabricated teeth (acrylic, nanohybrid composite, and cross-linked) and denture teeth produced by computeraided design/computer-aided manufacturing (CAD/CAM) technology. MATERIALS AND METHODS. Prefabricated teeth and CAD/CAM (milled) denture teeth were divided into 10 groups and bonded to different denture base materials. Groups 1-3 comprised of different types of prefabricated teeth and cold-polymerized denture base resin; groups 4-6 comprised of different types of prefabricated teeth and heat-polymerized denture base resin; groups 7-9 comprised of different types of prefabricated teeth and CAD/CAM (milled) denture base resin; and group 10 comprised of milled denture teeth produced by CAD/CAM technology and CAD/CAM (milled) denture base resin. A universal testing machine was used to evaluate the shear bond strength for all specimens. One-way ANOVA and Tukey post-hoc test were used for analyzing the data (α=.05). RESULTS. The shear bond strengths of different groups ranged from 3.37 ± 2.14 MPa to 18.10 ± 2.68 MPa. Statistical analysis showed significant differences among the tested groups (P<.0001). Among different polymerization methods, the lowest values were determined in cold-polymerized resin.There was no significant difference between the shear bond strength values of heat-polymerized and CAD/CAM (milled) denture base resins. CONCLUSION. Different combinations of materials for removable denture base and denture teeth can affect their bond strength. Cold-polymerized resin should be avoided for attaching prefabricated teeth to a denture base. CAD/CAM (milled) and heat-polymerized denture base resins bonded to different types of prefabricated teeth show similar shear bond strength values.

Abstract

PURPOSE. To determine the shear bond strengths of different denture base resins to different types of prefabricated teeth (acrylic, nanohybrid composite, and cross-linked) and denture teeth produced by computeraided design/computer-aided manufacturing (CAD/CAM) technology. MATERIALS AND METHODS. Prefabricated teeth and CAD/CAM (milled) denture teeth were divided into 10 groups and bonded to different denture base materials. Groups 1-3 comprised of different types of prefabricated teeth and cold-polymerized denture base resin; groups 4-6 comprised of different types of prefabricated teeth and heat-polymerized denture base resin; groups 7-9 comprised of different types of prefabricated teeth and CAD/CAM (milled) denture base resin; and group 10 comprised of milled denture teeth produced by CAD/CAM technology and CAD/CAM (milled) denture base resin. A universal testing machine was used to evaluate the shear bond strength for all specimens. One-way ANOVA and Tukey post-hoc test were used for analyzing the data (α=.05). RESULTS. The shear bond strengths of different groups ranged from 3.37 ± 2.14 MPa to 18.10 ± 2.68 MPa. Statistical analysis showed significant differences among the tested groups (P<.0001). Among different polymerization methods, the lowest values were determined in cold-polymerized resin.There was no significant difference between the shear bond strength values of heat-polymerized and CAD/CAM (milled) denture base resins. CONCLUSION. Different combinations of materials for removable denture base and denture teeth can affect their bond strength. Cold-polymerized resin should be avoided for attaching prefabricated teeth to a denture base. CAD/CAM (milled) and heat-polymerized denture base resins bonded to different types of prefabricated teeth show similar shear bond strength values.

참고문헌 (33)

  1. Pero AC, "Bond strength of artificial teeth attached to a microwave-polymerized denture base resin after immersion in disinfectant solutions", J Prosthodont, 25, pp.576~579 (2016)
  2. Marra J, "Evaluation of the bond strength of denture base resins to acrylic resin teeth : effect of thermocycling", J Prosthodont, 18, pp.438~443 (2009)
  3. Madhav GV, "Shear bond strength of acrylic teeth to acrylic denture base after different surface conditioning methods", J Contemp Dent Pract, 14, pp.892~897 (2013)
  4. Chittaranjan B, "Evaluation of shear bond strength of three different types of artificial teeth to heat cure denture base resin : an in vitro study", Indian J Dent Res, 24, pp.321~325 (2013)
  5. Jain G, "The effect of different chemical surface treatments of denture teeth on shear bond strength : a comparative study", J Clin Diagn Res, pp.ZC15~ZC18 (2014)
  6. Neppelenbroek KH, "Effect of potentially chromogenic beverages on shear bond strength of acrylic denture teeth to heat-polymerized denture base resins", J Indian Prosthodont Soc, 16, pp.271~275 (2016)
  7. Akin H, "Shear bond strength of denture teeth to two chemically different denture base resins after various surface treatments", J Prosthodont, 23, pp.152~156 (2014)
  8. Patil SB, "Bonding acrylic teeth to acrylic resin denture bases : a review", Gerodontology, 23, pp.131~139 (2006)
  9. Choi JJE, "Bond strength of denture teeth to heat-cured, cad", cam and 3d printed denture acrylics, 2020, pp.29, 415~421
  10. Yanikoglu DN, "Comparative bond strengths of autopolymerising denture resin and light cured composite resin to denture teeth", Int Dent J, 52, pp.20~24 (2002)
  11. Barbosa DB, "Effect of monomer treatment and polymerisation methods on the bond strength of resin teeth to denture base material", Gerodontology, 26, pp.225~231 (2009)
  12. Yoshida Y, "Self-assembled nano-layering at the adhesive interface", J Dent Res, 91, pp.376~381 (2012)
  13. Akin H, "Effects of different surface treatments on the bond strength of acrylic denture teeth to polymethylmethacrylate denture base material", Photomed Laser Surg, 32, pp.512~516 (2014)
  14. Andrade de Freitas SL, "Effect of thermocycling, teeth, and polymerization methods on bond strength teeth-denture base", Int J Dent, pp.2374327~ (2018)
  15. Cunningham JL, "Shear bond strength of resin teeth to heatcured and light-cured denture base resin", J Oral Rehabil, 27, pp.312~316 (2000)
  16. Roodabeh Koodaryan, "Effect of surface treatment methods on the shear bond strength of autopolymerized resin to thermoplastic denture base polymer", The Journal of Advanced of Prosthodontics, 8(6), pp.504~510 (2016), 대한치과보철학회[DOI]
  17. Gharebagh TG, "Comparison of bond strength of acrylic, composite, and nanocomposite artificial teeth to heat-cure acrylic denture base resin", Front Dent, 16, pp.166~172 (2019)
  18. Prpic V, "A study of the flexural strength and surface hardness of different materials and technologies for occlusal device fabrication", J Prosthet Dent, 121, pp.955~959 (2019)
  19. Infante L, "Fabricating complete dentures with CAD", CAM technology, 2014, pp.111, 351~355
  20. Chung YJ, "3D printing of resin material for denture artificial teeth: chipping and indirect tensile fracture resistance", Materials, 11, pp.1798~ (2018)
  21. Kim H, "Denture flask fabrication using fused deposition modeling three-dimensional printing", J Prosthodont Res, 64, pp.231~234 (2020)
  22. "IvoBase CAD Bond"[URL]
  23. "Vita Vionic Bond"[URL]
  24. 한상연, "Shear bond strength between CAD", CAM denture base resin and denture artificial teeth when bonded with resin cement, 2020, pp.12(5), 251~258[DOI]
  25. Sirisha K, "Validity of bond strength tests : A critical review : Part I", J Conserv Dent, 17, pp.305~311 (2014)
  26. Barbosa DB, "Bond strength of denture teeth to acrylic resin : effect of thermocycling and polymerisation methods", Gerodontology, 25, pp.237~244 (2008)
  27. Barbosa DB, "A technique for fabrication specimens for shear bond test using an embedded machine", Rev Odontol UNESP, 36, pp.189~192 (2007)
  28. Büyükyilmaz S, "The effects of polymerization temperature on the acrylic resin denture base-tooth bond", Int J Prosthodont, 10, pp.49~54 (1997)
  29. Rosca B, "Reparability of two different CAD", CAM polymer materials using a light-cured composite and universal adhesives, 2016, pp.57, 189~196
  30. Barragan G, "Ceramic repair : influence of chemical and mechanical surface conditioning on adhesion to zirconia", Oral Health Dent Manag, 13, pp.155~158 (2014)
  31. Seabra B, "Influence of multimode universal adhesives and zirconia primer application techniques on zirconia repair", J Prosthet Dent, 112, pp.182~187 (2014)
  32. Mine A, "Effectiveness of current adhesive systems when bonding to CAD", CAM indirect resin materials : A review of 32 publications, 2019, pp.55, 41~50
  33. 정기원, "Influence of surface treatments and repair materials on the shear bond strength of CAD", CAM provisional restorations, 2019, pp.11(2), 95~104[DOI]

이 간행물의 다른 논문 (6건)

Biomechanical behavior of CAD/CAM cobalt-chromium and zirconia full-arch fixed prosthesesThaís Barbin, Letícia Del Rio Silva, Daniele Valente Velôso, Guilherme Almeida Borges, Anna Gabriella Camacho Presotto, Valentim Adelino Ricardo Barão, Francisco Carlos Groppo, Marcelo Ferraz Mesquitapp. 329-337Relationships between the upper central incisor crown forms and degree of labial inclination, overbite, and overjet in Japanese young adultsKaoru Koide, Fumi Mizuhashi, Takeshi Kurita, Toshihide Satopp. 338-343How adjustment could affect internal and marginal adaptation of CAD/CAM crowns made with different materialsMohammad Moharrami, Marzieh Alikhasi, Mahya Hasanzadepp. 344-350Effects of overdenture attachment systems with different working principles on stress transmission: A three-dimensional finite element studyUlviye Sebnem Buyukkaplan, Nurullah Turkerpp. 351-360Effect of the volumetric dimensions of a complete arch on the accuracy of scanners이규복, 유범영, 김민규, 손큰바다pp. 361-368
원문 보기