Influence of toothbrush abrasion and surface treatments on the color and translucency of resin infiltrated hybrid ceramics
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
PURPOSE. The study compared the color change, lightness, and translucency of hybrid resin ceramics exposed to toothbrush abrasion and surface treatment. MATERIALS AND METHODS. Four hybrid ceramics [Lava Ultimate (LU), Vita Enamic (EN), Shofu HC (SH), and Crystal Ultra (CU)] were compared with a glass-ceramic (Vita Mark II) control. One hundred and twenty specimen blocks were prepared using a precision saw machine. Specimens in each material were divided into four subgroups based on the surface treatment (polishing or staining) and a storage medium (water or citric acid). Simulated tooth brushing with a mixture of 100 RDA (radioactive abrasives) with 0.3 ml distilled water was used for 3650 cycles (7300 strokes) for each specimen. Measurements for the color change, lightness, and translucency were measured after toothbrushing using a spectrophotometer. Statistical analysis compared outcomes using paired t-test, ANOVA, and Tukey post hoc test. RESULTS. The maximum color change was identified in SH (stained acid) [1.44 (0.40)], whereas the lowest was identified in EN (polished water) [0.66 (0.16)] material. The maximum and minimum loss of surface translucency was observed in SH (polished water) [12.3 (0.52)] and EN (stained acid) [6.5 (0.55)] specimens, respectively. Lastly, loss of lightness was the highest in VM (polished acid) [69 (0.95)], whereas the lowest was observed in CU (stained water) [56.7 (0.86)]. CONCLUSION. The comparison presented a significant effect of toothbrush abrasion on translucency and lightness of the hybrid resin ceramics. Color change was not significantly influenced irrespective of the storage medium employed. Surface staining demonstrated the preservation and stability of color and optical properties under the influence of toothbrush abrasion and chemical trauma.
Abstract
PURPOSE. The study compared the color change, lightness, and translucency of hybrid resin ceramics exposed to toothbrush abrasion and surface treatment. MATERIALS AND METHODS. Four hybrid ceramics [Lava Ultimate (LU), Vita Enamic (EN), Shofu HC (SH), and Crystal Ultra (CU)] were compared with a glass-ceramic (Vita Mark II) control. One hundred and twenty specimen blocks were prepared using a precision saw machine. Specimens in each material were divided into four subgroups based on the surface treatment (polishing or staining) and a storage medium (water or citric acid). Simulated tooth brushing with a mixture of 100 RDA (radioactive abrasives) with 0.3 ml distilled water was used for 3650 cycles (7300 strokes) for each specimen. Measurements for the color change, lightness, and translucency were measured after toothbrushing using a spectrophotometer. Statistical analysis compared outcomes using paired t-test, ANOVA, and Tukey post hoc test. RESULTS. The maximum color change was identified in SH (stained acid) [1.44 (0.40)], whereas the lowest was identified in EN (polished water) [0.66 (0.16)] material. The maximum and minimum loss of surface translucency was observed in SH (polished water) [12.3 (0.52)] and EN (stained acid) [6.5 (0.55)] specimens, respectively. Lastly, loss of lightness was the highest in VM (polished acid) [69 (0.95)], whereas the lowest was observed in CU (stained water) [56.7 (0.86)]. CONCLUSION. The comparison presented a significant effect of toothbrush abrasion on translucency and lightness of the hybrid resin ceramics. Color change was not significantly influenced irrespective of the storage medium employed. Surface staining demonstrated the preservation and stability of color and optical properties under the influence of toothbrush abrasion and chemical trauma.
참고문헌 (28)
- Almeida JR, "Resin-based luting agents and color stability of bonded ceramic veneers", J Prosthet Dent, 114, pp.272~277 (2015)
- Silami FD, "Influence of different types of resin luting agents on color stability of ceramic laminate veneers subjected to accelerated artificial aging", Brazilian Dent J, 27, pp.95~100 (2016)
- Vohra F, "Influence of Er;Cr : YSGG laser on shear bond strength and color stability of lithium disilicate ceramics : an in vitro study", Photobiomodul Photomed Laser Surg, 37, pp.483~488 (2019)
- Sebnem Ulviye Buyukkaplan, "Effects of staining liquids and finishing methods on translucency of a hybrid ceramic material having two different translucency levels", The Journal of Advanced of Prosthodontics, 9(5), pp.387~393 (2017), 대한치과보철학회[DOI]
- Vichi A, "Translucency of ceramic materials for CEREC CAD", CAM system, 2014, pp.26, 224~231
- Sarı kaya I, "Effect of surface finishing on the colour stability and translucency of dental ceramics", BMC Oral Health, 18, pp.40~ (2018)
- Stawarczyk B, "Evaluation of mechanical and optical behavior of current esthetic dental restorative CAD", CAM composites, 2015, pp.55, 1~11
- Dirxen C, "Clinical performance of a new biomimetic double network material", Open Dent J, 7, pp.118~122 (2013)
- Pop-Ciutrila IS, "Shade correspondence, color, and translucency differences between human dentine and a CAD", CAM hybrid ceramic system, 2016, pp.28, S46~S55
- Lepri CP, "Surface roughness and color change of a composite : influence of beverages and brushing", Dent Mater J, 31, pp.689~696 (2012)
- Kilinc E, "The effect of ceramic restoration shade and thickness on the polymerization of light-and dual-cure resin cements", Oper Dent, 36, pp.661~669 (2011)
- Johnston WM, "Review of translucency determinations and applications to dental materials", J Esthet Restor Dent, 26, pp.217~223 (2014)
- Krithikadatta J, "CRIS Guidelines(Checklist for Reporting In-vitro Studies) : A concept note on the need for standardized guidelines for improving quality and transparency in reporting in-vitro studies in experimental dental research", J Conserv Dent, 17, pp.301~304 (2014)
- Sharma GWu, "The CIEDE2000 color-difference formula: Implementation notes, supplementary test data, and mathematical observations", Color Res Appl, 30, pp.21~30 (2005)
- Johnston WM, "Translucency parameter of colorants for maxillofacial prostheses", Int J Prosthodont, 8, pp.79~86 (1995)
- Shahmiri R, "Optical properties of zirconia ceramics for esthetic dental restorations : a systematic review", J Prosthet Dent, 119, pp.36~46 (2018)
- Acar O, "Color stainability of CAD", CAM and nanocomposite resin materials, 2016, pp.115, 71~75
- Zimmerli B, "The influence of toothbrushing and coffee staining on different composite surface coatings", Clin Oral Investig, 16, pp.469~479 (2012)
- Albaker AM, "Bonding integrity and compressive strength of re-bonded, surface conditioned and Er Cr YSGG laser treated lithium disilicate ceramics", J Appl Biomat Func Mater, 18 (2020)
- Gasparik C, "Effect of accelerated staining and bleaching on chairside CAD", CAM materials with high and low translucency, 2019, pp.38, 987~993
- Villarroel M, "Direct esthetic restorations based on translucency and opacity of composite resins", J Esthet Restor Dent, 23, pp.73~87 (2011)
- Ferhan Egilmez, "Comparative color and surface parameters of current esthetic restorative CAD", CAM materials, 2018, pp.10(1), 32~42[DOI]
- Omer Sagsoz, "The effects of different polishing techniques on the staining resistance of CAD", CAM resin-ceramics, 2016, pp.8(6), 417~422[DOI]
- Lee YK, "Translucency of human teeth and dental restorative materials and its clinical relevance", J Biomed Opt, 20, pp.045002~ (2015)
- Roselino L, "Effect of brushing time and dentifrice abrasiveness on color change and surface roughness of resin composites", Brazilian Dent J, 26, pp.507~513 (2015)
- Al Ben Ali A, "The effect of variations in translucency and background on color differences in CAD", CAM lithium disilicate glass ceramics, 2014, pp.23, 213~220
- Domingos PA, "Composite resin color stability : influence of light sources and immersion media", J Appl Oral Sci, 19, pp.204~211 (2011)
- Rajan VV, "Effects of tooth brushing on wear, surface roughness, and color stability of composite resins-a review", J Pharm Res, 12, pp.95~ (2018)