Three-dimensional morphometric analysis of facial units in virtual smiling facial images with different smile expressions
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
PURPOSE. Accuracy of image matching between resting and smiling facial models is affected by the stability of the reference surfaces. This study aimed to investigate the morphometric variations in subdivided facial units during resting, posed and spontaneous smiling. MATERIALS AND METHODS. The posed and spontaneous smiling faces of 33 adults were digitized and registered to the resting faces. The morphological changes of subdivided facial units at the forehead (upper and lower central, upper and lower lateral, and temple), nasal (dorsum, tip, lateral wall, and alar lobules), and chin (central and lateral) regions were assessed by measuring the 3D mesh deviations between the smiling and resting facial models. The one-way analysis of variance, Duncan post hoc tests, and Student’s t-test were used to determine the differences among the groups (α = .05). RESULTS. The smallest morphometric changes were observed at the upper and central forehead and nasal dorsum; meanwhile, the largest deviation was found at the nasal alar lobules in both the posed and spontaneous smiles (P < .001). The spontaneous smile generally resulted in larger facial unit changes than the posed smile, and significant difference was observed at the alar lobules, central chin, and lateral chin units (P < .001). CONCLUSION. The upper and central forehead and nasal dorsum are reliable areas for image matching between resting and smiling 3D facial images. The central chin area can be considered an additional reference area for posed smiles; however, special cautions should be taken when selecting this area as references for spontaneous smiles.
Abstract
PURPOSE. Accuracy of image matching between resting and smiling facial models is affected by the stability of the reference surfaces. This study aimed to investigate the morphometric variations in subdivided facial units during resting, posed and spontaneous smiling. MATERIALS AND METHODS. The posed and spontaneous smiling faces of 33 adults were digitized and registered to the resting faces. The morphological changes of subdivided facial units at the forehead (upper and lower central, upper and lower lateral, and temple), nasal (dorsum, tip, lateral wall, and alar lobules), and chin (central and lateral) regions were assessed by measuring the 3D mesh deviations between the smiling and resting facial models. The one-way analysis of variance, Duncan post hoc tests, and Student’s t-test were used to determine the differences among the groups (α = .05). RESULTS. The smallest morphometric changes were observed at the upper and central forehead and nasal dorsum; meanwhile, the largest deviation was found at the nasal alar lobules in both the posed and spontaneous smiles (P < .001). The spontaneous smile generally resulted in larger facial unit changes than the posed smile, and significant difference was observed at the alar lobules, central chin, and lateral chin units (P < .001). CONCLUSION. The upper and central forehead and nasal dorsum are reliable areas for image matching between resting and smiling 3D facial images. The central chin area can be considered an additional reference area for posed smiles; however, special cautions should be taken when selecting this area as references for spontaneous smiles.
참고문헌 (46)
- Pucciarelli V, "Assessing normal smiling function through 3D-3D surfaces registration : an innovative method for the assessment of facial mimicry", Aesthetic Plast Surg, 42, pp.456~463 (2018)
- Demir R, "Three-dimensional evaluation of smile characteristics in subjects with increased vertical facial dimensions", Am J Orthod Dentofacial Orthop, 157, pp.773~782 (2020)
- Horn S, "Smile dimensions affect self-perceived smile attractiveness", Sci Rep, 11, pp.2779~ (2021)
- Wampfler JJ, "Superimposition of serial 3-dimensional facial photographs to assess changes over time : A systematic review", Am J Orthod Dentofacial Orthop, 161, pp.182~97.e2 (2022)
- Maal TJ, "Registration of 3-dimensional facial photographs for clinical use", J Oral Maxillofac Surg, 68, pp.2391~2401 (2010)
- Naros A, "Three-dimensional quantification of facial asymmetry in children with positional cranial deformity", Plast Reconstr Surg, 148, pp.1321~1331 (2021)
- Gkantidis N, "Evaluation of 3-dimensional superimposition techniques on various skeletal structures of the head using surface models", PLoS One, 10, pp.e0118810~ (2015)
- Häner S, "Valid 3D surface superimposition references to assess facial changes during growth", Sci Rep, 11, pp.16456~ (2021)
- Cammarata MJ, "Three-dimensional analysis of donor masks for facial transplantation", Plast Reconstr Surg, 143, pp.1290e~7e (2019)
- Maal TJ, "Variation of the face in rest using 3D stereophotogrammetry", Int J Oral Maxillofac Surg, 40, pp.1252~1257 (2011)
- Altındiş S, "Effects of different rapid maxillary expansion appliances on facial soft tissues using three-dimensional imaging", Angle Orthod, 86, pp.590~598 (2016)
- van der Meer WJ, "Reliability and validity of measurements of facial swelling with a stereophotogrammetry optical three-dimensional scanner", Br J Oral Maxillofac Surg, 52, pp.922~927 (2014)
- Park S, "Differences in facial expressions between spontaneous and posed smiles : automated method by action units and three-dimensional facial landmarks", Sensors(Basel), 20, pp.1199~ (2020)
- Lambros V, "Facial aging: a 54-year, three-dimensional population study", Plast Reconstr Surg, 145, pp.921~928 (2020)
- Manjula WS, "Smile : a review", J Pharm Bioallied Sci, 7, pp.S271~5 (2015)
- Ekman P, "Felt, false, and miserable smiles", J Nonverbal Behav, 6, pp.238~252 (1982)
- Lin Y, "A novel three-dimensional smile analysis based on dynamic evaluation of facial curve contour", Sci Rep, 6, pp.22103~ (2016)
- Hulsey CM, "An esthetic evaluation of lip-teeth relationships present in the smile", Am J Orthod, 57, pp.132~144 (1970)
- Dindaroğlu F, "Social smile reproducibility using 3-D stereophotogrammetry and reverse engineering technology", Angle Orthod, 86, pp.448~455 (2016)
- Tanikawa C, "Test-retest reliability of smile tasks using three-dimensional facial topography", Angle Orthod, 88, pp.319~328 (2018)
- Rudy HL, "Three-dimensional facial scanning at the fingertips of patients and surgeons : accuracy and precision testing of iPhone X three-dimensional scanner", Plast Reconstr Surg, 146, pp.1407~1417 (2020)
- Clark EA, "The facial action coding system for characterization of human affective response to consumer product-based stimuli : a systematic review", Front Psychol, 11, pp.920~ (2020)
- Gunnery SD, "Perceptions of Duchenne and non-Duchenne smiles : A meta-analysis", Cogn Emot, 30, pp.501~515 (2016)
- Gibelli D, "An assessment of how facial mimicry can change facial morphology : implications for identification", J Forensic Sci, 62, pp.405~410 (2017)
- Cummaudo M, "Pitfalls at the root of facial assessment on photographs : a quantitative study of accuracy in positioning facial landmarks", Int J Legal Med, 127, pp.699~706 (2013)
- Othman SA, "Reproducibility of facial soft tissue landmarks on facial images captured on a 3D camera", Aust Orthod J, 29, pp.58~65 (2013)
- Fattahi TT, "An overview of facial aesthetic units", J Oral Maxillofac Surg, 61, pp.1207~1211 (2003)
- Ilankovan V, "Local flaps in facial reconstruction", pp.23~43 (2015), Springer International Publishing
- Yamamoto S, "Intuitive facial imaging method for evaluation of postoperative swelling : a combination of 3-dimensional computed tomography and laser surface scanning in orthognathic surgery", J Oral Maxillofac Surg, 74, pp.2506.e1~10 (2016)
- Kuramoto E, "Characteristics of facial muscle activity during voluntary facial expressions : Imaging analysis of facial expressions based on myogenic potential data", Neuropsychopharmacol Rep, 39, pp.183~193 (2019)
- Schumann NP, "Atlas of voluntary facial muscle activation : Visualization of surface electromyographic activities of facial muscles during mimic exercises", PLoS One, 16, pp.e0254932~ (2021)
- Beiraghi-Toosi A, "Relationship between hyperactivity of depressor septi nasi muscle and changes of alar base and flaring during smile", World J Plast Surg, 5, pp.45~50 (2016)
- Standring S, "Gray’s anatomy : the anatomical basis of clinical practice", AJNR Am J Neuroradiol, 26, pp.2703~ (2005)
- De Souza Pinto EB, "Anatomy of the median part of the septum depressor muscle in aesthetic surgery", Aesthetic Plast Surg, 22, pp.111~115 (1998)
- Mai HY, "Impact of matching point selections on image registration accuracy between optical scan and computed tomography", Biomed Res Int, 2020, pp.3285431~ (2020)
- Choi YD, "The effects of distribution of image matched fiducial markers on accuracy of computer-guided implant surgery", J Prosthodont, 29, pp.409~414 (2020)
- Van Der Geld P, "Tooth display and lip position during spontaneous and posed smiling in adults", Acta Odontol Scand, 66, pp.207~213 (2008)
- Dindaroğlu F, "Accuracy and reliability of 3D stereophotogrammetry : A comparison to direct anthropometry and 2D photogrammetry", Angle Orthod, 86, pp.487~494 (2016)
- Liu J, "Accuracy of 3-dimensional stereophotogrammetry : Comparison of the 3dMD and Bellus3D facial scanning systems with one another and with direct anthropometry", Am J Orthod Dentofacial Orthop, 160, pp.862~871 (2021)
- Pan F, "Accuracy of RGB-D camera-based and stereophotogrammetric facial scanners : a comparative study", J Dent, 127, pp.104302~ (2022)
- D’Ettorre G, "A comparison between stereophotogrammetry and smartphone structured light technology for three-dimensional face scanning", Angle Orthod, 92, pp.358~363 (2022)
- Bassam Hassan, "Integrating 3D facial scanning in a digital workflow to CAD", CAM design and fabricate complete dentures for immediate total mouth rehabilitation, 2017, pp.9(5), 381~386[DOI]
- Lin WS, "Integrating a facial scan, virtual smile design, and 3D virtual patient for treatment with CAD-CAM ceramic veneers:A clinical report", J Prosthet Dent, 119, pp.200~205 (2018)
- Daher R, "3D digital smile design with a mobile phone and intraoral optical scanner", Compend Contin Educ Dent, 39, pp.e5~e8 (2018)
- Park JM, "Integration of intraoral digital scans with a 3D facial scan for anterior tooth rehabilitation", J Prosthet Dent, 121, pp.394~397 (2019)
- Jreige CS, "Esthetic treatment planning with digital animation of the smile dynamics : A technique to create a 4-dimensional virtual patient", J Prosthet Dent, 128, pp.130~138 (2022)