천리안위성 해수면온도 3차산출물 생성기법 비교연구
A Comparative Study on the Generation of COMS Level 3 Product for Sea Surface Temperature
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The COMS (Communication, Ocean and Meteorological Satellite) has been used in numerical weather prediction and meteorological monitoring over East Asia and Oceania since it has been launched in 2010. For more active utilization in climate research, the COMS level 3 products should be available in appropriate spatial and temporal resolutions. We compared different methods to generate monthly sea surface temperature (SST) products from the COMS time-series data. We employed three techniques for aggregating the time series, which are arithmetic mean, timeslot average, and moving average, and also used mean ensemble of them. Each level 3 dataset around South Korea was compared with monthly SST product from the Moderate Resolution Imaging Spectroradiometer (MODIS) of Aqua satellite during April 2011-March 2014. The timeslot average showed better root mean squared difference (RMSD) during the initial operational period of the COMS, when the retrieved values could be somewhat unstable. Daytime aggregations were derived more accurately by using the arithmetic mean or moving average, and the accuracy of nighttime aggregation was improved by the mean ensemble. Also, the timeslot average presented reasonable results particularly for coastlines where the standard deviation and missing value ratio were greater than normal. Because an optimal aggregation technique was variable depending on spatial and temporal conditions, we should be careful in selecting appropriate method for generation of the COMS level 3 products according to research objectives.
Abstract
The COMS (Communication, Ocean and Meteorological Satellite) has been used in numerical weather prediction and meteorological monitoring over East Asia and Oceania since it has been launched in 2010. For more active utilization in climate research, the COMS level 3 products should be available in appropriate spatial and temporal resolutions. We compared different methods to generate monthly sea surface temperature (SST) products from the COMS time-series data. We employed three techniques for aggregating the time series, which are arithmetic mean, timeslot average, and moving average, and also used mean ensemble of them. Each level 3 dataset around South Korea was compared with monthly SST product from the Moderate Resolution Imaging Spectroradiometer (MODIS) of Aqua satellite during April 2011-March 2014. The timeslot average showed better root mean squared difference (RMSD) during the initial operational period of the COMS, when the retrieved values could be somewhat unstable. Daytime aggregations were derived more accurately by using the arithmetic mean or moving average, and the accuracy of nighttime aggregation was improved by the mean ensemble. Also, the timeslot average presented reasonable results particularly for coastlines where the standard deviation and missing value ratio were greater than normal. Because an optimal aggregation technique was variable depending on spatial and temporal conditions, we should be careful in selecting appropriate method for generation of the COMS level 3 products according to research objectives.
참고문헌 (14)
- Development of Meterological Data Processing System of Communication, Ocean and Meteorological Satellite, "Ahn, M.", Meteorological Research Institute, ~ (2007)
- Alvera-Azcárate. A., "Outlier detection in satellite data using spatial coherence", Remote Sensing of Environment, 119(16), pp.84~91 (2012)
- Emery, W.J., "Accuracy of in situ sea surface temperatures used to calibrate infrared satellite measurements", Journal of Geophysical Research, 106 (2001)[DOI]
- Goodrum, G., "NOAA KLM User’s Guide", NOAA NESDIS, ~ (2000)
- Guan, L., "Retrieval of sea surface temperature from TRMM VIRS", Journal of Oceanography, 59(2), pp.245~249 (2003)
- MODIS atmosphere L3 gridded product algorithm theoretical basis document, "Hubanks, P.", National Aeronautics and Space Administration, ~, pp.National Aeronautics and Space Administration Technical Report No. ATBD-MOD-30 (2008)
- Kern, M., "Outlier detection algorithms and their performance in GOCE gravity field processing", Journal of Geodesy, 78(9), pp.509~519 (2005)
- 김대선, "시공간통계를 이용한 천리안 위성산출물의 품질관리방안", 기후연구, 8(1), pp.45~53 (2013), 기후연구소
- Lee, S., "A Study on the interpolation of DTM applying moving average and linear prediction method", Journal of the Korean Society of Surveying, Geodesy, Photogram metry and Cartography, 4(1), pp.58~71 (1986)
- Lu, C., "Detecting and tracking regional outliers in meteorological data", Information Sciences, 177(7), pp.1609~1632 (2007)
- 박경애, "인공위성관측 해수면온도와 현장관측 수온의 비교를 통해 본 해양 피층-표층 수온의 차이", 대한원격탐사학회지, 24(4), pp.273~287 (2008), 대한원격탐사학회
- 박수희, "비선형 멀티모델 앙상블기법에 의한 북반구 겨울철 강수량 예측", 한국기상학회지, 41(6), pp.1015~1028 (2005), 한국기상학회
- Prabhakara, C., "Estimation of sea surface temperature from remote sensing in the 11 to 13-μm window region", Journal of Geophysical Researcht, 79, pp.5039~5044 (1974)
- Wan, Z., "Estimate of noise and systematic error in early thermal infrared data of the Moderate Resolution Imaging Spectroradiometer (MODIS)", Remote Sensing of Environment, 80(1), pp.47~54 (2002)