본문 바로가기
KERD
논문KCI 등재

에폭시 그룹을 함유한 실란 올리고머의 합성과 그로부터 유도된 폴리이미드/실리카 혼성 필름의 특성

Synthesis and Characterization of Polyimide/silica Hybrid Films Derived from Silane Oligomer Containing Epoxy Group

1

조회

0

다운로드

1

인용

0

참고문헌

키워드

초록

Tetramethylorthosilicate와 glycidol을 이용하여 액상의 에폭시 그룹을 함유한 실란 올리고머를 합성하고, p-PDA/ODA 그리고 PMDA/BPDA 단량체로부터 제조된 4성분계 폴리아믹산과 혼성화시켜 고점도의 폴리아믹산/실리카 혼성체를 합성하였다. 그리고 이를 열적 이미드화 공정을 거쳐 폴리이미드/실리카 혼성화 필름을 제조하였다. 혼성화 필름의 특성을 분석한 결과, 열팽창계수는 실리카 함량이 높을수록 최초 17 ppm/K에서 10 ppm/K까지 감소하였고, 탄성률은 증가하였으나 인장강도는 감소하는 경향을 보였다. 또한 유연성 동박 적층 필름을 제조하여 분석한 결과, 실리카 함량 변화에 따라 접착력은 0.43 kgf/cm에서 1.02 kgf/cm까지 증가하였다. 따라서 높은 접착력을 요구하는 유연성 동박 적층 필름 제조시에는 실리카와 혼성된 폴리이미드 필름이 효과적임을 알 수 있었다.

Abstract

Poly(amic acid) was synthesized from the reaction of p-PDA/ODA and PMDA/BPDA and silane oligomer containing epoxy group was also synthesized from the reaction of tetramethylorthosilicate (TMOS) and glycidol. After hybridizing poly (amic acid) and silane oligomer, they were effectively converted into polyimide/silica hybrid films by thermal imidization process. As the silica contents in hybrid films increased, CTE values decreased from 17 ppm/K to 10 ppm/K and the tensile modulus increased, in spite of decreasing tensile strength. In addition, the peel test showed that the adhesion strength of hybrid film was enhanced from 0.43 kgf/cm to 1.02 kgf/cm. Therefore, it could be concluded that the polyimide/silica hybrid film is effective to enhance adhesion strength for FCCL films.

참고문헌 (20)

  1. Y. Zhang, , Adv. Mater, 1056(17) (2005)
  2. Jun Yang, "A Water-Soluble Polyimide Precursor: Synthesis and Characterization of Poly(amic acid) Salt", Macromolecular Research, 12(3), pp.263~268 (2004), 한국고분자학회
  3. T. Takeichi, , J. Polym. Sci. B:Polym. Phys, 39, pp.3011~ (2001)
  4. K. Ghosh, "Polyimides Fundamentals and Applications", pp.16~ (1996)
  5. 서관식, "4성분계 폴리이미드 필름 제조 및 열적-기계적 특성", 폴리머, 31(2), pp.130~135 (2007), 한국고분자학회
  6. T. Agag, , Polym, 42, pp.3399~ (2001)
  7. Y. Huang, , J. Appl. Polym. Sci, 88, pp.2210~ (2003)
  8. J. C. Huang, , J. Appl. Polym. Sci, 79, pp.794~ (2001)
  9. A. Morikawa, , Chem. Mater, 6, pp.913~ (1994)
  10. P. Musto, , Polym, 47, pp.6172~ (2006)
  11. C. T. Yen, , Polym, 44, pp.7079~ (2003)
  12. Sh. Al-kandary, , J. Mater. Sci, 41, pp.2907~ (2006)
  13. A. Hideki, "JP patent 2003-136632", ~ (2003)
  14. G. Sigfredo, "PCT patent WO02", 018393, 2002
  15. J. Huang, , Polym, 46, pp.7018~ (2005)
  16. D. L. Pavia, "Introduction to Spectroscopy" (1996), Saunder College
  17. K. O. Gaw, "Advance in Polymer Science", 190, pp.108~ (1999)
  18. E. P. Plueddmann, "Silane Coupling Agent" (1982), Plenum
  19. L. Pauling, "The Nature of the Chemical Bond" (1960), Cornell University Press
  20. G. Odian, "Principles of Polymerization", 33~ (1991)

관련 논문AI추천

폴리이미드 가교로 기계적 강도가 향상된 실리카 기반 에어로겔의 합성 및 물리화학적 특성 분석김지승, 김태희, 이원준, 이홍섭, 최하령한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2022 · 제29권 제4호조성 및 실록산 분자 구조에 따른 전자 패키징용 에폭시 기반 실록산/실리카 복합체의 물성 변화 분석강동준, 임현균, 장준호한국분말재료학회 · 한국분말재료학회지2023 · 제30권 제4호에폭시-산무수물 조성물의 경화거동 및 실리카 첨가에 따른 특성변화 연구김경만, 이충희한국접착및계면학회 · 접착 및 계면2009 · 제10권 제3호Glass Flake 및 (3-Aminopropyl)triethoxysilane 첨가에 따른 폴리이미드 필름의 산소투과도 감소 연구김지승, 김태희, 나하윤, 박형호, 이원준, 이준혁, 전은경, 최하령한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2024 · 제31권 제3호Low-temperature solution processible, solventless and transparent silica nanoparticle-dispersed epoxy hybrid materialsDong Jun Kang청정에너지연구소 · Journal of Ceramic Processing Research2013 · 제14권 제2호연성인쇄회로기판의 에폭시수지와 폴리이미드 사이의 계면접착력 및 신뢰성 평가김정규, 박영배, 손기락한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2017 · 제24권 제1호

이 간행물의 다른 논문 (4건)