스로틀밸브 개도에 따른 자동변속기의 변속 특성에 관한 연구
A Study on the Shift Characteristics of Automatic Transmission from the Opening Position of Throttle Valve
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In case of a low speed gearing in the automatic transmission, since the torque is increased, it is difficult to secure a good feeling on gear shift of transmission. It is possible to improve the shift feeling on transmission by applying a one-way clutch in case of the gear shift from the first stage to the second stage. But in case of the gear shift from the second stage to the third stage, it is difficult to secure a good feeling on gear shift of transmission because the hydraulic components are directly controlled simultaneously. In this study, a shift performance of an automatic transmission was investigated as a basic study to solve these problems. The subjects of this study are 2-3 step upshifting gearing process and the performance data such as the pressure characteristics and torque of the transmission according to the amount of the throttle valve opening are analyzed on basis of experiment with an actual vehicle. As a result, the transient time of the shift is closely related to the amount of the throttle valve, opening and the time point at which the shifting ends is shortened when the throttle valve opening reaches 30% of the opening amount.
Abstract
In case of a low speed gearing in the automatic transmission, since the torque is increased, it is difficult to secure a good feeling on gear shift of transmission. It is possible to improve the shift feeling on transmission by applying a one-way clutch in case of the gear shift from the first stage to the second stage. But in case of the gear shift from the second stage to the third stage, it is difficult to secure a good feeling on gear shift of transmission because the hydraulic components are directly controlled simultaneously. In this study, a shift performance of an automatic transmission was investigated as a basic study to solve these problems. The subjects of this study are 2-3 step upshifting gearing process and the performance data such as the pressure characteristics and torque of the transmission according to the amount of the throttle valve opening are analyzed on basis of experiment with an actual vehicle. As a result, the transient time of the shift is closely related to the amount of the throttle valve, opening and the time point at which the shifting ends is shortened when the throttle valve opening reaches 30% of the opening amount.
참고문헌 (12)
- 신유인, "상용차용 다단 변속기 개발 프로세스에 관한 연구", 박사, 기계설계학과, pp.2014
- Jae Hoon Han, "A Study on Shift Map of Automatic Transmission considering Transmission Efficiency", pp.2019
- Sung-Dae Jung, "Software Development for Evaluating Shift Quality of Automatic Transmission Vehicle", KSAE, Proceedings of Spring Conf., pp.109~110 (2018)
- Tae-Hee Cho, "A Study on the Upshift Characteristics of Multi-speed Automatic Transmission", pp.2016
- Chang-KyuLee, "A Study on the Shifting Control Logic for Automated Manual Transmission using Artificial Intelligence Techniques", pp.2015
- V. Ngo, "Gear Shift Map Design Methodology for Automotive Transmissions", J. of Automobile Engineering, 228, pp.50~72 (2014)
- 전성배, "변속기 및 모터 손실을 고려한 TMED Type DCT PHEV의CS 모드 주행 시 변속맵 개발", 한국자동차공학회 논문집, 25(3), pp.367~373 (2017), 한국자동차공학회[DOI]
- S. Iqbal, "Model for Predicting Drag Torque in Open Multi-Disks Wet Clutches", Journals of Fluids Engineering, 136(2), pp.021103-1~021103-11 (2014)
- 이상화, "기어 소음 품질 안정화를 위한 전달오차 측정 시스템 개발 및 전달오차 스펙 개발에 대한 연구", 한국소음진동공학회논문집, 24(6), pp.470~475 (2014), 한국소음진동공학회[DOI]
- Flash Temperature in Clutches, "T. M. Cameron", SAE, ~, pp.SAE paper No. 2005-01-3890 (2005)
- Experimental Characterization of Wet Clutch Friction Behaviors Including Thermal Dynamics, "V. Ivanović", SAE, ~, pp.SAE paper No.2009-01-1360 (2009)
- 심소영, "자동변속기 차량의 변속성능 시뮬레이터 개발 및 변속감 개선연구", 석사, 기계공학, pp.2008