소수성 미니채널 내 물-에탄올 혼합 액적 슬러그 거동에 따른 접촉선에서의 압력강하에 대한 실험적 연구
An experimental study of pressure drop at contact line of D.I.water-ethanol mixture slug in a hydrophobic minichannel
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
At a two phase flow, according to gas and liquid phase flow rates, various flow regimes are developed such as bubbly, slug/plug, churn, annular, droplet flow and so on. At a two phase flow in small scaled channels, among various flow regimes, the intermittent flows such as bubbly, slug/plug flow are developed in the broad regions of two phase flow pattern map. In particular, the flow regimes are influenced by surface wettability. In a case of slug flow in hydrophobic small scaled channels, gas and liquid phases are perfectively separated by interfaces and contact line. The pressure drop of the two-phase flow is largely generated at moving contact line. Therefore, to well design two-phase flow system with small scales, it is important to estimate the pressure drop at moving contact line. In this study, on the basis of previous research, the pressure drop at moving contact line is experimentally measured for a various fluids (0-40% water-ethanol mixtures). And, the previous correlation to estimate pressure drop at moving contact line is verified by experimental data. In an addition, we discuss interfacial broken phenomena of slug flow in a minichannel. (D=1.555mm).
Abstract
At a two phase flow, according to gas and liquid phase flow rates, various flow regimes are developed such as bubbly, slug/plug, churn, annular, droplet flow and so on. At a two phase flow in small scaled channels, among various flow regimes, the intermittent flows such as bubbly, slug/plug flow are developed in the broad regions of two phase flow pattern map. In particular, the flow regimes are influenced by surface wettability. In a case of slug flow in hydrophobic small scaled channels, gas and liquid phases are perfectively separated by interfaces and contact line. The pressure drop of the two-phase flow is largely generated at moving contact line. Therefore, to well design two-phase flow system with small scales, it is important to estimate the pressure drop at moving contact line. In this study, on the basis of previous research, the pressure drop at moving contact line is experimentally measured for a various fluids (0-40% water-ethanol mixtures). And, the previous correlation to estimate pressure drop at moving contact line is verified by experimental data. In an addition, we discuss interfacial broken phenomena of slug flow in a minichannel. (D=1.555mm).
참고문헌 (6)
- S. Graimella, "Condensation pressure drop in circular microchannels", Heat Transfer Engineering, 26(3), pp.28~35 (2005)
- C. Y. Lee, "Effect on interfacial tensions on behavior of two-phase plug flow in round mini-channels", The 8th International Symposium on Transport Phenomena, pp.27~30 (2007)
- D. I. Yu, "Pressure drop and dynamic contact angle of triple-line motion in a hydrophobic microchannel", Experimental Thermal and Fluid Sciences, 39, pp.60~70 (2012)
- D. Pecar, "Volumetric properties of ethanol-water mixtures under high temperatures and pressures", Fluid Phase Equilibria, 230, pp.36~44 (2005)
- B. Gonzalez, "Density, dynamic viscosity and drived properties of binary mixtures of methanol or ethanol with water, ethyl acetata and methyl acetate at T=(293. 15, 298. 15 and 303. 15) K", Journal of Chemical Thermodynamics, 39, pp.1578~1588 (2007)
- G. Vazquez, "Surface Tension of Alcohol + Water from 20 to 50℃", Journal of Chemical & Engineering Data, 40, pp.611~614 (1995)