방탄복 시험방법 개선에 관한 연구
A Study on the Improvement of Test Method for the Body Armor
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study examines the domestic and international bulletproof test standards of armor and plate which are supplied to the domestic market. In addition, improvements and suggestions for the test standard were presented. Experiments were conducted to clarify the distances to the edge, the difference between ammunition makers, and the position of the impact point of the bulletproof plate, which have been discussed in the conventional bulletproof test. As a result of the study, it was confirmed that the bulletproof performance is excellent as the distance from the edge increases. Next, performance differences between ammunition makers were not found. Finally, plates should be applied to the US ESAPI test specification to provide a clear and reproducible test method.
Abstract
This study examines the domestic and international bulletproof test standards of armor and plate which are supplied to the domestic market. In addition, improvements and suggestions for the test standard were presented. Experiments were conducted to clarify the distances to the edge, the difference between ammunition makers, and the position of the impact point of the bulletproof plate, which have been discussed in the conventional bulletproof test. As a result of the study, it was confirmed that the bulletproof performance is excellent as the distance from the edge increases. Next, performance differences between ammunition makers were not found. Finally, plates should be applied to the US ESAPI test specification to provide a clear and reproducible test method.
참고문헌 (9)
- National Institute of Justice, "Ballistic Resistance of Body Armor", NIJ Standard 0101.06. U.S. Department of Justice, ~ (2008)
- National Institute of Justice, "Ballistic Resistance of Body Armor", NIJ Standard 0101.07. DRAFT. U.S. Department of Justice, ~ (2017)
- "KDS 8470-4003-5. 2018, Military Specification Body Armor, Fragmentation-small arms protective", Defense Acquisition Program Administration, ~ (2018)
- US Department of Defense, "DoD Test Method Standard “V50 Ballistic Test for Armor", MIL-STD-662F, ~ (1997)
- 구승환, "로지스틱 회귀모형을 활용한 방탄시험에서의 V50 산출방안", 품질경영학회지, 46(3), pp.453~464 (2018), 한국품질경영학회[DOI]
- Korea. Army, "PURCHASE DESCRIPTION", PRD-9515-4006, ~ (2018)
- 김훈, "개인 방탄·방검복 시스템 체계개발 선행연구", 한국기계기술학회지, 20(6), pp.879~885 (2018), 한국기계기술학회[DOI]
- U.S. Army, "PURCHASE DESCRIPTION PERSONAL ARMOR E SMALL ARMS PROTECTIVE INSERT (ESAPI)", CO, 2013
- Park, J. L., "Ballistic performance of p-aramid fabrics impregnated with shear thickening fluid: Part II-Effect of fabric count and shot location", Textile Research Journal, 82(6), pp.542~557 (2012)