공극이 있는 재료의 등가물성 도출을 위한 연구 Part I : 2차원 등방성 재질 조건
A Study for Estimation of Equivalent Mechanical Properties of Materials with Porosity Part I. Isotropic Elasticity in Plane Stress
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The demand for materials with porosity is steadily increasing and the need for porous materials is increasing in fields such as chemical engineering and energy storage. In order to minimize trial and error, verifying design validity through finite element method at the design stage has the advantage to verify design validity with low cost. However there are limitations in finite element analysis using porous materials. In this study calculating the equivalent mechanical properties reflecting the porosity was carried out, and the first step was the isotropic elasticity in plane stress condition. The equivalent elastic modulus and the equivalent Poisson's ratio were derived through simulation. Assuming that the voids exist in a two-dimensional symmetrical shape and a constant distribution, the unit cell was defined and the equivalent mechanical properties were calculated. The specimen with same condition were measured through a universal test machine (UTM), the elastic modulus and Poisson's ratio were measured. The similarity between the value obtained through the simulation and the value measured through the experiment was under 5%, so the validity of this simulation was verified. With this result, FEM with porous materials will be used for design.
Abstract
The demand for materials with porosity is steadily increasing and the need for porous materials is increasing in fields such as chemical engineering and energy storage. In order to minimize trial and error, verifying design validity through finite element method at the design stage has the advantage to verify design validity with low cost. However there are limitations in finite element analysis using porous materials. In this study calculating the equivalent mechanical properties reflecting the porosity was carried out, and the first step was the isotropic elasticity in plane stress condition. The equivalent elastic modulus and the equivalent Poisson's ratio were derived through simulation. Assuming that the voids exist in a two-dimensional symmetrical shape and a constant distribution, the unit cell was defined and the equivalent mechanical properties were calculated. The specimen with same condition were measured through a universal test machine (UTM), the elastic modulus and Poisson's ratio were measured. The similarity between the value obtained through the simulation and the value measured through the experiment was under 5%, so the validity of this simulation was verified. With this result, FEM with porous materials will be used for design.
참고문헌 (16)
- A. P. Katsoulidis, "Chemical control of structure and guest uptake by a conformationally mobile porous material", Nature, 565, pp.213~217 (2019)
- A. Slater, "Porous mateirals funtion-led design of new porous materials", Science, 348, pp.8075~ (2015)
- T. Nomura, "Impregnation of porous material with phase change material for thermal energy storage", Materials chemistry and physics, 115, pp.846~850 (2009)
- K. P. Babu, "Development of an RVE and its stiffness predictions based on mathematical homogenization theory for short fibre composites", International journal of solids and structures, 130-131, pp.80~114 (2018)
- K. Breuer, "RVE modelling of short fiber reinforced thermoplastics with discrete fiber orientation and fiber length distribution", SN Appl. Sci, 2, pp.91~ (2020)
- S. Bargmann, "Generation of 3D representative volume elements for heterogeneous materials : A review", Progress in materials science, 96, pp.322~384 (2018)
- Y. Pan, "Generation of 3D representative volume elements for heterogeneous materials : A review", Composites sciences and technology, 68, pp.2792~2798 (2008)
- P. J. Blanco, "Variational foundations and generalized unified theory of RVE-based multiscale models", Arch Computation Methods Eng, 23, pp.191~253 (2016)
- 강유진, "캔틸레버보의 형상비에 따른 1차원 보와 2차원 평면응력 유한요소해석 결과의 비교", 한국전산구조공학회논문집, 28(5), pp.459~466 (2015), 한국전산구조공학회[DOI]
- C. A. Felippa, "Introduction to finite element methods", ~ (2004)
- A. Loghin, "Mixed mode fracture in power law hardening materials for plane stress", Journal of the Mechanics and Physics of Solids, 139, pp.103890~ (2020)
- A. E. Kayabekir, "A Novel Hybrid Harmony Search Approach for the Analysis of Plane Stress Systems via Total Potential Optimization", Appl. Sci., 10(7), pp.2301~ (2020)
- C. Pyo, "Estimation of Heat Source Model’s Parameters for GMAW with Non-linear Global Optimization—Part I : Application of Multi-island Genetic Algorithm", Metals, 10(7), pp.885~ (2020)
- D. Deng, "Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements", Computational Materials Science, 37(3), pp.269~277 (2006)
- T. Sixun, "The FEM Model Driven Method of the Static Performance Calculation for Gas Joumal Bearing by Python", 2018 IEEE International Conference on Mechatronics and Automation (ICMA), pp.18~22 (2018)